It is not enough to buy toilet light, because the installation of the toilet needs to meet certain conditions, otherwise the beautiful toilet can only become a decoration.
First of all, according to the connection of the tank and the base, the toilet can be divided into two types: conjoined and split. According to the difference of drainage system, it can be divided into flush type and siphon type. According to the drainage method, toilets can be divided into horizontal (wall row) and bottom row (lower row). The first choice for consumers is the flushing principle of the toilet, ie, flush or siphon. In general, the siphon type is: In the vacuum state of the toilet pipe, due to the effect of atmospheric pressure, the height difference of the liquid column is rapidly formed, thereby generating a pressure difference, so that the water flows from a high pressure level to a low pressure level with a small pressure, and Fill the sewage pipe until the water is completely discharged into the air. The flushing type refers to relying on the effective amount of water to maximize the potential energy at the fastest flow rate and maximum flow rate, cover the dirt in the toilet, and discharge the waste to the toilet. The most popular on the market today is the siphonic toilet.
After choosing the toilet, the actual situation of the bathroom can not be ignored. The toilet can be selected in the following order according to the actual situation of the bathroom.
First of all, the type of purchase should be determined according to their actual situation and personal preferences, such as one-piece lavatory or split squat toilet, extended squat toilet or ordinary squat toilet; secondly, it should be confirmed that the drainage position of their toilet seat is horizontal. Drain into the wall or down into the ground so that you can make your own choices. Among them, when it is confirmed that the need is for the drainage of toilets, the concept of wall distance must be clearly defined. The so-called wall distance refers to the distance from the centerline of the ground (the toilet) to the completion of the wall surface. When it is confirmed that the horizontal drainage is required to sit on the toilet, the concept of clear distance must be taken. The so-called ground distance refers to the distance from the center line of the outlet to the finished floor after the toilet seat.
Finally, after choosing a toilet, it is necessary to purchase water tank inlet pipes and angle valves. Many customers often forget to purchase ancillary products and allow decoration workers to assemble themselves. As a result, leakage of angle valves often results in unnecessary losses to consumers.
Sanitary ware buy toilet toilet leak
kitchen faucet,brass faucet kitchen,kitchen sink faucet,kitchen mixer tap
Guangdong Kinen Sanitary Ware Industrial Co.,Ltd. , https://www.kinengroup.com