The application of ceiling lamps is very extensive. At present, it has become a common lamp in offices, homes, entertainment and other places. Due to the stylish design and various styles of ceiling lamps, more and more people have begun to favor ceiling lamps. The following small series details the ceiling lamp installation procedure and the ceiling lamp purchase method.
Ceiling lamp installation steps
1, choose a good location
First of all, to determine the ceiling lamp installation location, it is best to choose the stone brick structure can withstand the weight of the ceiling wall or ceiling installation, try not to choose the wooden wall, to avoid the risk of falling for a long time.
2, remove the ceiling lamp mask
Remove the ceiling lamp mask, but be careful when removing the lamp. To avoid damage to the ceiling lamp, remove the lamp tube after the mask is removed to prevent the lamp from being broken during installation.
3, install the base
When installing the base, first use the electric drill to mark the position, and then install the expansion Bolts for fixing the base in the hole. Pay attention to the diameter and buried depth of the hole to be consistent with the bolt size.
4, connect the wire
After the base is fixed, connect the wires, but pay attention to the two wires connected to the power cable of the ceiling lamp. The electrical contact should be good. Also, wrap them with black tape and keep a certain distance. Try not to put the two wires in the same place. Under the metal sheet, avoid short circuits.
5. Install masks and accessories
After the wire is connected, it can be energized to see if it can be used normally. If there is no problem, then the mask can be installed. In addition, some pendants are also required because each ceiling lamp is not the same. The specific installation method can be installed according to the instructions.
Ceiling light purchase method
1, first determine the number of purchases
When purchasing a ceiling lamp, it is necessary to determine the quantity first so that there will be no problem of buying less or buying more. General bedroom can choose the same series of products; living room and dining room can choose mother and child series products; and kitchen, bathroom can choose to integrate products with the same ceiling size.
2, choose the mask material
At present, mask materials on the market include acrylic masks, plastic masks, and glass masks. You can press the mask with your hand to see how soft the mask is. Then look at the color. The ruddy color is better. It's best to see if the removal is convenient.
3, select the light source
Ceiling light source points: ordinary incandescent, fluorescent, tungsten halogen lamp, the use of different light source ceiling lamps are different, and led light source ceiling lamp prices are more affordable, and power, long life, cost-effective.
Editor's summary: About the ceiling lamp installation procedure and the ceiling lamp purchase method is introduced here, I hope to be helpful to everyone, want to learn more relevant knowledge can pay attention to this site information.
Ceiling light installation
2 Pillow Block Bearing SUCFA204-207,Pillow Block Bearing Seat SUCFA204-207,Pillow Block Bearing SUCFA204-207 Sizes
Jiangsu Dingtian Stainless Steel Products Co., Ltd. , https://www.dingtiancasting.com