Germany EVONIK Industrial Co., Ltd. said that it will jointly develop with Daimler Automotive and some R&D institutions the world's largest lithium-battery battery with the largest electricity storage capacity, so that wind power and solar power generation can realize large-capacity, low-cost storage in the future.
The company said that the battery for power plants to be developed is based on a polymer lithium-ion battery technology that combines the ceramic storage technology that the company currently designs for electric vehicles. This technology is characterized by good safety, small size and high cycle stability.
As a first step in the R&D project, the company plans to build a power storage device with a power of one megawatt in a power station in Saarland, western Germany. The required battery storage capacity is about 700 kWh. The volume is only 40 to 50 times that of batteries for electric or hybrid cars. In theory, if this power storage device is charged and discharged once every 15 minutes, it can guarantee the power supply to 4000 households every year.
Klaus Engel, chairman of EVONIK, said that once the new battery is successfully developed, it will be able to solve the problem of power supply fluctuations caused by the introduction of wind power and solar power to the grid. Industry experts pointed out that Germany alone plans to increase renewable energy production to half of total generation by 2050, and other EU countries will import more and more wind and solar power into the grid. This places ever-increasing demands on the storage and transmission technology of renewable energy power generation. Experts predict that the advanced storage devices in the future will be a huge market of billions of euros per year.
LED Sensor Batten Lights has options of microwave sensor and infrared sensor. There are two sensing modes. One is 0-10v dimming, and the other is on/off.
The main difference between these two modes is that the 0-10v dimming mode can set the brightness of the light after the person walks, and the pending time of this brightness can also be set. On/off mode, you can only set the time for the lights to turn off after a person walks, but not the brightness (that is, functions 3, 4 cannot be implemented). The 0-10v dimming mode is more intelligent.
Briefly introduce the function of sensor light:
1. Set up daylight threshold: If the ambient light is higher than the set brightness, the sensing function will not be triggered.
2. Set up the hold time: The time for the light to maintain brightness after the person walks away.
3. Set up a stand-by dim level: set the brightness maintained after the person walks
4. Set up stand-by time: After the person walks, the time to maintain low brightness
5. Set up detection area: Set the detection area.
Toggle button can set the remote distance of remote control and sensor.
If you need sensor lights in factories or warehouses, corridors, or other indoors, you can choose this LED Sensor batten lights. If you need IP66 sensor light, you can choose Sensor Waterproof Light.
Motion Sensor Led Light,Sensor Led Light,Motion Sensor with Led Light,Led Light Motion Sensor
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelight.com