[China Aluminum Network] There are two ways to install door stoppers, one is installed on the ground, and the other is installed on the wall or baseboard.
The function of the door stopper is now mostly magnetic. Now, with a magnetic door stopper installed on the floor as an example, the installation process is explained in detail for everyone.
1. First, confirm with the owner that the door suction installation method is installed on the ground or on the wall.
Because this is a bathroom, the owner decided that the door stopper was directly installed on the floor tile and left the space behind the door. The worker and the owner are confirming the specific installation location. The worker's master measures the amount of space behind the door. It does not have to meet the owner's wishes. 2. The second step is to open the door to the desired larger position. Test whether the door suction function is reasonable. Whether the suction distance on the door is appropriate.
Positioning the door, after positioning it well, open the door and try to see if the actual operation is reasonable, including whether the door stopper is a little in, or if it is out, what is the specific angle of the door stopper.
3. After the position is determined later, positioning is performed on the ground floor tile to first locate the stop position of the door.
Use a pencil to confirm the position of the door on the floor tile. The worker's master draws the line on the floor with a pencil, confirms the later position of the door opening, and confirms the door's later installation position in the next step. 4. After the door is positioned, paint the door. Positioning position.
The worker's master is making a sign of the position of the door stopper. The reason why it has to be positioned twice is to position the door and position the door. This is for better installation. The two points are in a straight line, which is a better way to confirm the angle of door opening and door opening.
5. The next task is to drill the electric drill and drill the door mounting holes on the floor.
The worker's master is drilling holes in the floor tiles, and the tile installed by the lover's mason's worker is solid enough. The door stopper only needs to drill a hole. 6. The fixed end of the assembled door suction fixed door is installed. Tighten the upper screw, and the door stopper is divided into fixed end and door end. The fixed end needs to be tightened before installation, and then the supplied inner angled wrench is used to fasten it to the floor or wall.
7, fixed door stopper on the ground with a small inner angle to screw the screw This is a fine live no experience, and then go through the confirmation position, drilling, assembly procedures, the next task is to install the fixed end of the ground, with Attached inside corner angle tool to tighten the screw on the fixed end, the door stopper is automatically installed.
8, confirm the position of the door door suction door door suction side as long as the screw can be tightened, the door light to install the fixed end is still useless, but also on the door to install, the key or the door position, the method is Open the door to a larger position first, then find the exact position on the door and tighten the door end door with a screw.
9, fine-tune the fine adjustment of the door suction fixed end angle and then fully tightened, door suction installation of the latter step is fine-tuning, revolving the door suction angle, so that all the door and door suction fit, completely tighten the screw door suction is small , but an integral part of home improvement. Each household must use a door stopper, and the door stopper should be fixed in the open door so as to prevent the door from hitting the wall to shake freely. Therefore, it is said that the door stopper has a small effect. The method and procedure for installing the door suction - installation door suction detailed installation process The role of the door suction is large, but it can not be sloppy installation, because it is still a moving part, to withstand the impact of the wooden door, pull, and also bear to fix it The stress of the wall and floor tiles, as well as the impact on the door, must also be taken into account. Therefore, the quality of the installation of the door stopper is directly related to the door, wall, floor, floor tiles, and personal safety.
Refrigeration Gas,Refrigeration Compressor Oil,Base Oil For Refrigeration,Gas Refrigerant R134A
LONG TERM ELEC. CO., LTD , https://www.longterm-hvac.com