In recent years, the types of wall materials for dressing and dressing have become more and more, and the effects are also rich and colorful. The most popular one is latex paint. Its bright colors, rich texture changes, and brightness and saturation all surpass traditional paints. The demand of the majority of consumers for the pursuit of individuality is therefore favored by the public. However, many people will entangle the issue of “ latex paint is good or spray well †before construction. What is the difference between spray and brush construction processes? Let's take a look!
First, latex paint spraying
This construction method requires the use of a specialized machine, such as a booster pump, which pressurizes the paint through a booster pump, and then delivers it to the high-pressure gun with a high pressure pipe, and releases the pressure from a special nozzle to achieve decentralized atomization. The effect of high-speed spraying on the object. The advantages of spraying are: 1 The paint sprayed on the wall can form a smooth, dense coating, there is no trace of the brush, this is a brush and roll can not achieve the effect. 2 Single-handed operation, construction speed is 10-16 times that of manual brushing. 3 It is atomized by high-pressure spray. The paint particles can penetrate into the pores of the wall to form a mechanical mesh with the wall surface to enhance the adhesion of the coating and prolong its life. 4 coating thickness is uniform, about 35 microns. 5 Paint well even with corners or gaps. However, it also has its disadvantages, that is, the film is delicate, the film is thin, the protection of the wall surface is poor, and it is difficult to repair at the later stage, and the paint consumption is large.
Second, latex paint
This construction method is the most conservative manual operation, but also earlier and simpler, more choice of wool brush, because it is more flexible, can minimize brush marks. The advantages of latex paint are: 1 simple tools, easy construction, saving paint. 2 easy to grasp, not limited by the size of the site, the size of the grass-roots shape, flexibility and strong adaptability to paint varieties. Its disadvantages are: low construction efficiency, high labor intensity, general decorative performance, and high volatility. It is not suitable for quick-drying oils. And by the construction personnel operating skills, if the operation is not agile, the film is prone to brush marks, sagging, brushing and other issues. Note: The proportion of water added during painting should be controlled between 20-30%. Above this dilution ratio, problems such as de-powdering, sagging, floating color, and missing bottom may occur.
Third, the latex paint brush or spray well
What kind of good is it? I believe we have a certain understanding after reading the above introduction, each has its own advantages and disadvantages, so we must set according to the actual needs of their own. If you want good latex paint construction results, then choosing a good quality latex paint is also very critical. 
Summary: The above is Xiaobian today bring you good latex paint brush or spray related knowledge, I believe that my friends have a certain understanding, about the latex paint brush or spray this problem we can refer to, I hope this This article is helpful to you.
Black Pom Rod,Black Delrin Rod,Black Acetal Rod,Acetal Round Bar
Ningbo Zero Engineering Plastics Co.,Ltd , https://www.zero-peek.com