Model NO.: 0.125MM-5.0MM
Stock: Not Stock
Width: 750-1250mm
Thickness: 0.12-0.8mm
Surface Treament: Chromed Passivation/ Oiled/ Dry/ Anti-Finger Print
Coil Weight: 3-6 Mt
Trademark: shanghai huahai steel co., ltd
Transport Package: Standard Export Seaworthy Packing In20′′ Container
Specification: 0.14-1.0*914-1250*length
Origin: Shandong Province
HS Code: 72107000
Specifications
1. Cold Rolled Steel Coil
2. Thickness: 0.125mm-3mm
3. Width: 700mm-1250mm
4. Application: Construction, hardware, home appliances, etc
Packaging & Shipping
Standard Seaworthy Package:
(1) 4 eye bands and 4 circumferential bands in steel,
(2) galvanized metal fluted rings on inner and outer edges,
(3) galvanized metal & waterproof paper wall protection disk,
(4) galvanized metal & waterproof paper around circumference and bore protection.
(5) According to customers' requirements
Shipment Terms:
(1) Payments:T/T, L/C, Western Union.Etc
(2)Delivery Time:10-30 days depend on the quantity (the shortest delivery time)
(3)Container Info:20ft container will hold 26 tons max (5 or 6 pallets).
(4)Trade Terms:FOB, CFR, CIF, etc
Awards and Certifications:Â
As a professional manufacturer of galvanized steel products, we have attained some awards and certifications including:Â
1. ISO 9001 Quality Management System Certification
2. ISO 14001 Environmental Management System Certification
3. GB/T28001 Occupational Health and Safety Management System Certification
4. Enterprise of Observing Contract and Valuing Credit
5. Shandong Famous Brand
6. SGS Certification
Our Strength:Â
1.Competitive price from our own factory with best quality and service
2.Rich experience and convenient transportation
3.Continuous cold rolling production and advanced production line
4.Quick delivery and small order is ok, welcome trial order
5.Standard export seaworthy packing
6.We will stay in line for above 14 hours, so any problems about the products we can answer for you in detail, when off line, please send us emails, we will answer for you ASAP.
7.Yuanda is a Famous brand in China and our products are exported to Europe, America, Africa, Middle East, Southeast Asia and so on
8.We will be responsible for any quality problem
FAQ:Â
1. Are you a factory or a trading company?Â
shanghai huahai steel  is a professional factory of cold rolled steel, galvanized steel, prepainted steel (PPGI) and some other steel products since 2005.Â
2. Is the sample available?Â
Yes, samples can be sent for test if you need.Â
3. Are the products tested before shipping?Â
Yes, all of our steel coils are qualified before shipping. We have special inspectors, they only responsible for quality inspection every day.Â
4. What benefits will you bring?Â
The good quality of the products can satisfy your customers and make you get good reputation and more orders from your market. Â
Why Us(Huahai Steel):
1, Mill/factory supply,Quality protection,4 Galvanized steel lines keep runing.
2, Competitive price with best quality and service
3, Nearest sea port, Convenient transportation,Efficient service team online for 24 hours
4, More than 7 years Export Experiences,More than 50 countries customers
5. Delivery time: Within 25-35 days after the receipt of L/C or according to customer's    requirement.
6.Â
Warranty:
As the professional manufacturer and supplier of the steel,Huahai steel corporation makes the steel co-operation mutual beneficial without any risky to the worldwide customers.Huahai Steel sales&service department not only promise to provide the high quality products,excellent communication,fast and reliable deliveries,as well as the reasonble price,but also help the customers to develop the market better with more efforts.
World wide customer satisfaction:
More than 50 worldwide customers none-risky experiences approved.
Huhai Steel has been exporting steel coils to more than 50 countries directly. Our long term supply extends to USA, UK, Germany, Italy, Spain, Belgium, France, Poland, Greece, Ukraine, Belarus, Russia, Turkey, Egypt, Saudi Arabia, Iran, Ethiopia, Niger, Brazil, Colombia, Chile, Peru, Australia, New Zealand, etc...
contact information
mobile phone number:+86-15214331065
Commodity | Hot dip galvanized steel coil and sheet (GI) |
Techinical Standard: Â Â | Â JIS 3302 /Â ASTM A653Â /Â Â EN10143Â |
Grade | Â DX51D / DX52D/ DX53D/ S250, S280, 320GD |
Types:   | Commercial / Drawing / Deep Drawing / Structural quality |
Width | 650/726/820/914/1000/1200/1219/1220/1250mm |
Thickness | 0.12-1.0mm (0.14-0.5mm is the most advantage thickness) |
Type of coating:   |  galvanized  |
Zinc coating | Â Z60-150g/m2 |
Surface treament | chromed / skinpass/ oiled/slightly oiled/ dry/Â anti-fingerprint |
Surface structure: Â Â Â Â | zero spangle / minimized spangle /Â regular spangle/ big regular |
ID coil | 508mmor 610mm |
Package:    | Properly packed for ocean freight exportation in 20' ' containers |
Application: | Industrial panels, roofing and siding for painting |
Price terms | FOB, CFR, CIF |
Payment terms | 20%TT in advance+80% TT or irrevocable 80%L/C at sight |
delivery time | 25 days after recepit of 20% TT |
Remarks | Insurance is all risks |
MTC 3.1Â will be handed on with shipping documents | |
We accept SGS certificatation test |
Grade | Chemical composition % |  | ||||||||
C | Si | Mn | P | S | Alta | Ti | Nb | |||
No more than | No more than | No more than | No more than | No more than | No less than | No more than | No more than | |||
DC51D+Z,DC51D+ZF | 0.1 | --- | 0.5 | 0.035 | 0.035 | --- | --- | --- | ||
(St01Z,St02Z,St03Z) | ||||||||||
 | ||||||||||
Grade | Mechanical properties | plating adhesion | ||||||||
 | yield strength | tensile strength | n 90 | r 90 | Elongation % | Plating weight(g/m 2 ) | ||||
Mpa | Mpa | No less than | No less than | No less than | Bending diameter | |||||
 |  |  |  |  |  |  |  (a=thickness of slab) | |||
 |  |  |  |  | L 0 =80mm b=20mm |  | ||||
 |  |  |  |  | Normal  thickness  mm |  | ||||
 |  |  |  |  | ≤ 0.7 | >0.7 | ≤ 140/140 | >140/140~ | >175/175 | |
175/175 | ||||||||||
DC51D+Z(St01Z,St02Z,St03 Z), DC51D+ZF | --- | 270~500 | --- | --- | 20 | 22 | 0a | 1a | 2a | |
 Exposure Test : |  | Salt Spray Test : | ||||||||
Environment | GI | Enviroment | GI Average Corrosion | AL-ZN  Average Corrosion | ||||||
 | Average corrosion | |||||||||
 | g/m2 /y | μ m/y | g/m2/y | um/y | g/m2/y | um/y | ||||
Tough Marine Climate | 140 | 9.8 | tough Marine Climate | 140 | 9.8 | 16 | 2.2 | |||
Moderate Marine Climate | 18 | 1.3 | Modeerate Marine Climate | 18 | 1.3 | 4 | 0.54 | |||
Industrial Climate | 20 | 1.4 | Industrial Climate | 20 | 1.4 | 4.2 | 0.57 | |||
Countryside Climate | 4 | 0.28 | Countryside Climate | 4 | 0.28 | 1.3 | 0.17 | |||
Plainness of hot dip galvanized substrate A.2.1 For steel sheet with a specified minimum yield strength less than 260MPa, the maximum plainness tolerance should be in conformity with the stipulations of Table A1. | ||||||||||
MPa | Nominal width | Plainness (mm) for the nominal thickness as shown below |  | |||||||
 |  | Common precise PF.A | High-level precision PF.B |  |  | |||||
 |  | <0.70 | 0.70~<1.60 | 1.60~3.0 | <0.70 | 0.70~<1.60 | 1.60~3.0 |  | ||
<260 | <1200 | 10 | 8 | 8 | 5 | 4 | 3 | |||
 | 1200~<1500 | 12 | 10 | 10 | 6 | 5 | 4 | |||
 | ≥1500 | 17 | 15 | 15 | 8 | 7 | 6 | |||
For steel sheet and steel strip with a specified minimum yield strength not less than 260MPa but less than 360MPa,and the grades of DC51+Z/Z  DD51D+Z /S550GD+Z/ZF), the maximum plainness tolerance should be in conformity with the stipulations of Table A2. Table A2 | ||||||||||
MPa | Nominal width | Plainness (mm) for the nominal thickness as shown below |  | |||||||
 |  | Common precise PF.A | High-level precision PF.B |  |  | |||||
 |  | <0.70 | 0.70~<1.60 | 1.60~3.0 | <0.70 | 0.70~<1.60 | 1.60~3.0 |  | ||
260~<360 | <1200 | 13 | 10 | 10 | 8 | 6 | 5 | |||
 | 1200~<1500 | 15 | 13 | 13 | 9 | 8 | 6 | |||
 | ≥1500 | 20 | 19 | 19 | 12 | 10 | 9 | |||
Thickness tolerance for hot dip galvanized substrate | ||||||||||
For steel sheet with a specified minimum yield strength less than 260MPa, the maximum thickness tolerance should be in conformity with the stipulations of Table A6. | ||||||||||
Nominal thickness | Thickness tolerance while the widths are showed as follows |  |  |  | ||||||
 | Common precise PT.A | High-level precision PT.B |  |  |  | |||||
 | ≤1200 | >1200~1500 | >1500 | ≤1200 | >1200~1500 | >1500 |  | |||
0.30~0.40 | ±0.04 | ±0.05 | ±0.06 | ±0.030 | ±0.035 | ±0.040 | ||||
>0.40~0.60 | ±0.04 | ±0.05 | ±0.06 | ±0.035 | ±0.040 | ±0.045 | ||||
>0.60~0.80 | ±0.05 | ±0.06 | ±0.07 | ±0.040 | ±0.045 | ±0.050 | ||||
>0.80~1.00 | ±0.06 | ±0.07 | ±0.08 | ±0.045 | ±0.050 | ±0.060 | ||||
>1.00~1.20 | ±0.07 | ±0.08 | ±0.09 | ±0.050 | ±0.060 | ±0.070 | ||||
>1.20~1.60 | ±0.10 | ±0.11 | ±0.12 | ±0.060 | ±0.070 | ±0.080 | ||||
>1.60~2.00 | ±0.12 | ±0.13 | ±0.14 | ±0.070 | ±0.080 | ±0.090 | ||||
>2.00~2.50 | ±0.14 | ±0.15 | ±0.16 | ±0.090 | ±0.100 | ±0.110 | ||||
>2.50~3.00 | ±0.17 | ±0.17 | ±0.18 | ±0.110 | ±0.120 | ±0.130 | ||||
For steel sheet and steel strip with a specified minimum yield strength not less than 260MPa but less than 360MPa, the thickness tolerance should be in conformity with the stipulations of Table A7. | ||||||||||
Nominal thickness | Thickness tolerance while the widths are showed as follows |  |  |  | ||||||
Common precise PT.A | High-level precision PT.B |  |  |  | ||||||
≤1200 | >1200~1500 | >1500 | ≤1200 | >1200~1500 | >1500 |  | ||||
0.30~0.40 | ±0.05 | ±0.06 | ±0.07 | ±0.035 | ±0.040 | ±0.045 | ||||
>0.40~0.60 | ±0.05 | ±0.06 | ±0.07 | ±0.040 | ±0.045 | ±0.050 | ||||
>0.60~0.80 | ±0.06 | ±0.07 | ±0.08 | ±0.045 | ±0.050 | ±0.060 | ||||
>0.80~1.00 | ±0.07 | ±0.08 | ±0.09 | ±0.050 | ±0.060 | ±0.070 | ||||
>1.00~1.20 | ±0.08 | ±0.09 | ±0.11 | ±0.060 | ±0.070 | ±0.080 | ||||
>1.20~1.60 | ±0.11 | ±0.13 | ±0.14 | ±0.070 | ±0.080 | ±0.090 | ||||
>1.60~2.00 | ±0.14 | ±0.15 | ±0.16 | ±0.080 | ±0.090 | ±0.110 | ||||
>2.00~2.50 | ±0.16 | ±0.17 | ±0.18 | ±0.110 | ±0.120 | ±0.130 | ||||
>2.50~3.00 | ±0.19 | ±0.20 | ±0.20 | ±0.130 | ±0.140 | ±0.150 | ||||
For steel sheet and steel strip with a specified minimum yield strength not less than 360MPa, but less than or equal to 420 MPa, the thickness tolerance should be in conformity with the stipulations of Table A8. | ||||||||||
Nominal thickness | Thickness tolerance while the widths are showed as follows |  |  |  | ||||||
 | Common precise PT.A | High-level precision PT.B |  |  |  | |||||
 | ≤1200 | >1200~1500 | >1500 | ≤1200 | >1200~1500 | >1500 |  | |||
0.30~0.40 | ±0.05 | ±0.06 | ±0.07 | ±0.040 | ±0.045 | ±0.050 | ||||
>0.40~0.60 | ±0.06 | ±0.07 | ±0.08 | ±0.045 | ±0.050 | ±0.060 | ||||
>0.60~0.80 | ±0.07 | ±0.08 | ±0.09 | ±0.050 | ±0.060 | ±0.070 | ||||
>0.80~1.00 | ±0.08 | ±0.09 | ±0.11 | ±0.060 | ±0.070 | ±0.080 | ||||
>1.00~1.20 | ±0.10 | ±0.11 | ±0.12 | ±0.070 | ±0.080 | ±0.090 | ||||
>1.20~1.60 | ±0.13 | ±0.14 | ±0.16 | ±0.080 | ±0.090 | ±0.110 | ||||
>1.60~2.00 | ±0.16 | ±0.17 | ±0.19 | ±0.090 | ±0.110 | ±0.120 | ||||
>2.00~2.50 | ±0.18 | ±0.20 | ±0.21 | ±0.120 | ±0.130 | ±0.140 | ||||
>2.50~3.00 | ±0.22 | ±0.22 | ±0.23 | ±0.140 | ±0.150 | ±0.160 | ||||
For steel sheet and steel strip with a specified minimum yield strength not less than 420MPa, but less than or equal to 900 MPa, the thickness tolerance should be in conformity with the stipulations of Table A9. | ||||||||||
Nominal thickness | Thickness tolerance while the widths are showed as follows |  |  |  | ||||||
 | Common precise PT.A | High-level precision PT.B |  |  |  | |||||
 | ≤1200 | >1200~1500 | >1500 | ≤1200 | >1200~1500 | >1500 |  | |||
0.30~0.40 | ±0.06 | ±0.07 | ±0.08 | ±0.045 | ±0.050 | ±0.060 | ||||
>0.40~0.60 | ±0.06 | ±0.08 | ±0.09 | ±0.050 | ±0.060 | ±0.070 | ||||
>0.60~0.80 | ±0.07 | ±0.09 | ±0.11 | ±0.060 | ±0.070 | ±0.080 | ||||
>0.80~1.00 | ±0.09 | ±0.11 | ±0.12 | ±0.070 | ±0.080 | ±0.090 | ||||
>1.00~1.20 | ±0.11 | ±0.13 | ±0.14 | ±0.080 | ±0.090 | ±0.110 | ||||
>1.20~1.60 | ±0.15 | ±0.16 | ±0.18 | ±0.090 | ±0.110 | ±0.120 | ||||
>1.60~2.00 | ±0.18 | ±0.19 | ±0.21 | ±0.110 | ±0.120 | ±0.140 | ||||
>2.00~2.50 | ±0.21 | ±0.22 | ±0.24 | ±0.140 | ±0.150 | ±0.170 | ||||
>2.50~3.00 | ±0.24 | ±0.25 | ±0.26 | ±0.170 | ±0.180 | ±0.190 | ||||
Width tolerance | ||||||||||
Nominal width | Width tolerance | Width tolerance of the hot-dip zinc, hot-dip alu-zinc coated alloy steel sheets should conform to relevant parameters designed by A12. | ||||||||
 | Common precise PW.A | High-level precision PW.B | ||||||||
≤1200 | 0~+5 | 0~+2 | ||||||||
>1200~1500 | 0~+6 | 0~+2 | ||||||||
>1500 | 0~+7 |
Â
Plastic Products,Plastic Items ,Plastic Material ,Plastic Raw Material
Stainless Steel Wire Mesh Co., Ltd. , http://www.nblockers.com