As a high-grade building decoration material, Stone is widely used in interior and exterior decoration design, curtain wall decoration and public facilities construction. The seamless stone processing means that the interface after the stone is laid is leveled and polished. In fact, seamless processing is the basic process that stone refurbishment crystal face processing must have at present, that is to say to do crystal surface treatment must include the basic procedures of jointing, gluing, leveling, grinding and throwing. If you have this need, you may wish to follow me to understand the stone refurbished crystal face processing process and construction process related knowledge introduction!
Stone renovation process
1, into a dry - this process is divided into two operations, 1 water surface of the original stone surface joints, we use far-infrared lamp heating and drying. 2 Other flat moisture, naturally dry. As a result, the water-staining phenomenon has been completely removed, which is both economical and reasonable, and the customer is very satisfied.
2, to fill the stone joints - using joints to solve the cracks penetrating water is an important preventive measure. Must pay attention to caulking work. Filler material should have good adhesion, no powder, waterproof, can be polished and polished, we use German super marble crack filler, according to the process to fill the gap filling (fill the surface with the stone plane level, fill joints should be uniform To prevent omissions.) After drying and curing for more than two hours.
3, leveling grinding and polishing - in view of the stone surface before waterproofing, resulting in stone discoloration, we did not directly use the leveling method of grinding, but first with steel wool, with special equipment for grinding and rubbing, grinding away the stone The discoloration layer on the surface reveals a large white background. Fortunately, due to the lightness of the protective agent penetrating into the stone surface, we only received good results with the above solution, and the problem of discoloration that we are worried about has been addressed. The second set of solutions is to use marble diamond grinding plates, water-grinding discs, step-by-step polishing, and spare use.
4, rust-yellow treatment - according to the overall program, the first serious rust spot, with steel wool grinding, remove the surface floating rust, and then use a special marble rust remover for rust removal. The rust removal process is as follows: Clean surface Dry wet rust surface White paper towel Add rust Remover cover Plastic film Seal surface aging treatment 3 hours After washing with a neutral detergent After washing with dry water (One-time can not remove the net rust Traces can be reprocessed).
5, waterproof, protection - to prevent the marble from appearing in the future water marble, pan rust, and other pollution, is intended to our plan, after grinding the ground to protect, we learn the lessons of the original protective discoloration, choose several Better water repellent, take the same stone as an experiment, on the one hand to check the protective effect, on the other hand to check whether to change the color of the stone, and determine the amount of process according to the water absorption rate. After the above preparations were made, we only carried out extensive protection on the ground. Protective treatment We mainly focus on the following processes: 1 Clean the stone surface. 2 fully dry. 3 evenly brush protective agent, run through the stone surface, not to miss the brush, not too much to prevent accumulation, the former affect the protective effect, the latter affect the appearance and increase the difficulty of cleaning. 4 Under natural conditions, ventilated and dry for more than 24 hours.
6, crystal surface treatment: After the above process, you can perform the crystal surface treatment, we use the Spanish crystal hardener, adding agent in accordance with the use of process description, through the equipment pressure, low-speed grinding, the product Thermal reactions occur, making the floor a hard, non-slip mirror.
Stone refurbishment crystal face processing necessary process seamless processing
The seamless stone processing means that the interface after the stone is laid is leveled and polished. The stone interface after leveling the polished surface is transparent. At a distance, the interface is not obvious or can not be seen. The ground is like a stone paving and the overall feeling is extremely strong. Only when looking at a vertical viewing angle is it possible to see that the vague interface fills the process for the seamless processing of impressions: hook (cut) seams, waterproof (granite required), glue filling, grinding, polishing. In fact, seamless processing is currently a necessary basic process for the stone refurbishment of the crystal surface treatment process, that is to say, the crystal surface treatment must include the basic procedures of jointing, gluing, leveling, and grinding. Seamless processing is the precondition of crystal surface processing. The relationship between the two is complementary and mutual purpose. It is you who have me and I have your relationship.
Editor's summary: The above is an expert warning of stone refurbished crystal surface treatment method: Refurbishment should require the introduction of professional operation, and hope to help friends who have this requirement! For more information, please continue to follow our website, follow-up will show more exciting content. You can also purchase more of your favorite products on Qijia Mall!
High-grade stone stone cabinet decoration stone antique stone stone background wall offer
Our safety grating create safer working conditions across a variety of industrial environments. Some of the industries that benefit from using our products in the construction of their walkways, ladders, stairs, ramps.
Stair treads metal grating offers a number of advantages. The material provides greater strength, reliability, and flexibility, qualities that make it well-suited for use in critical structures, such as stairs, ducting, roofing, and more.
hot rolled, cold rolled, aluminum, galvanized plate,
stainless steel panel etc.
Anti-skid plate can be widely used in sewage treatment, power plant,
snow, stair step, antiskid pedal, and many other anti-skid areas.
Our safety grating provides a lightweight but durable surface that reduces the risk of slipping. It is suitable for use in many crane components, including the stairs, walkway, and operating platform.
The material offers durability and slip resistance-even when exposed to harsh road conditions, such as rain, snow, sleet, and dust-qualities that help ensure the safety of workers during loading and unloading operations.
Safety grating is used for many truck body components, including steps, flooring, and work platforms.
Features:
Corrosion resistance, Rust resistance.
Anti-slip resistance, Good air circulation.
Good drainage performance, Easy to install and uninstall.
High strength-to-weight performance,Durable and long lifespan.
--- PRODUCT SPECIFICATIONS---
Material
Hole patterns
crocodile mouth, round raised hole, tears shape etc.
Thickness
generally 2mm, 2.5mm, 3.0mm
Height
20mm, 40mm, 45mm, 50mm, customized
Length
1m, 2m, 2.5m, 3.0m, 3.66m
Production technique
punching, cutting, bending, welding
Use
Safety Grating,Aluminum Safety Grating,Heavy Duty Safety Grating,Galvanized Safety Grating
HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayimesh.com