The newly renovated house is bright and white. The tiles on the wall can be used as mirrors. With people staying in, a long time on the tile will inevitably have stains, it will affect the overall appearance. How can I deal with these stains? Xiao Bian, this will share the collection of tiles clean coup to you.
First, to prevent cracking:
In daily use, avoid using metal sharps, glass ceramics, iron nails and other hard objects to knock or rub the ground. Do not drag weight on the ground to avoid scratching the glaze and affecting the appearance.
Second, the surface clean:
1. When you clean the floor for daily cleaning, try to use dry tow and use less wet tow. After cleaning, it is best to open doors and windows immediately to allow the air to circulate and blow dry moisture from the tiled walls. In wet summer weather, use a dry cloth to wipe again, then turn on the air conditioner to remove moisture.
2. For general stains, use household cleaners such as detergents, washing powders, etc. or use detergents for cleaning. The tiles can be wiped directly with a dry cloth or water.
3. For adhesive glue or solid stains, hard brush cleaning tools such as shovels, steel brushes, etc. should not be used for forced brushing. According to the nature of the stain, choose a suitable cleaning agent for removal. The following methods are commonly used for the treatment of seepage: tea stains, fruit stains, coffee, sauce vinegar, leather shoes, and other stains. Use sodium hypochlorite diluent (bleach). Soak for 20-30 minutes after use. Wipe with cloth. For long-term stains, the soaking time can be several hours. Ink and anti-fouling wax must be used to mold mildew and sodium hypochlorite (bleach) is used. When used, just put the bleaching agent on the stain for a few minutes to wipe it clean; cement, scale, rust, rust, use hydrochloric acid or phosphoric acid solution, wipe it several times; paint, oil, oily marker, surface anti-fouling Wax layer using alkaline cleaners or organic solvents (and 5-keto, triethylene), to paint to remove oil; glue hammer India decontamination method: first use 20% -40% sodium hydroxide solution soak for 24 hours Wipe clean with a cloth, and then use a 30% - 50% hydrochloric acid solution and soak for 30 minutes. Wipe the cloth with an alkaline cleaner for the ice cream and acid cleaner for the lime scale.
Note: Acid-base detergents can effectively remove the stains on the tile surface, but because the acid-base components may cause corrosion on the tile surface, it should not be used frequently. More neutral cleaning agents should be used. When using the above decontamination agent, wear plastic gloves; after removing the stain, wipe the brick surface clean with clean water, and immediately dry it without leaving water stains.
Third, the gap processing:
The main raw material of the tile gap is putty and white cement. It is difficult to clean the dirt when it adheres to the dirt. Therefore, the gap is the place where the accumulation of dirt and bacteria is the most common place. Special attention must be paid to cleaning and maintenance. After the tiles are finished and daily cleaning, you can use a brush to put a waterproof agent in the crevices, which can play a waterproof and mildew effect. Stains that are often stained with stains can also be applied to the tile joints with candles to prevent excessive adhesion of the stain in advance.
Note: After laying tiles, it is best to paste anti-oil stickers on the tiles that are likely to be contaminated with grease around the cooking appliances, range hoods, etc., and use the grout at the crevices of the tiles to coat the joints of the tiles. Beautiful and resistant to oil.
Fourth, wear repair:
Tile surface is often due to friction, accumulation of stains and other issues appear uneven surface conditions, such as a slight scratch on the surface of the brick, apply toothpaste at the scratch, wipe with a soft dry cloth can be repaired.
Waxing the tiles (polishing tiles) on a regular basis can provide long-lasting protection. The interval of 2 to 3 months can effectively restore the surface luster of the tiles and extend the service life of the tiles. When the floor tile is waxed, the stains are thoroughly cleaned and then the wax surface treatment is performed. The wax is evenly applied to the floor tiles. After the wax is generally dried within 8 hours, the surface should not be trampled and the marks should not be left.
If there is a small breakage in the edge or in the middle of the tile, the small drop can be affixed with white latex.
Tile maintenance home knowledge
Rock Reamer,20 Inch Rock Reamer,20 Inch HDD Rock Reamer,HDD Directional Drilling
CANGZHOU GREAT DRILL BITS CO., LTD , https://www.pdcbits.nl