Characteristics:
§ Height Up to 79m
§ Work with standard concrete foundation or Ambor quick base
§ Standard monopole and Concealment
§ Ambor designed platform-Lower weight and lower EPA
§ International Design code
Specifications:
| Name | 4 Legged Telecom Lattice Angular Steel Tower |
| Type | Straight Pole ,Tensile Pole ,Turn Pole |
| Suit for | Electricity distribution |
| Shape | Conoid ,Multi-pyramidal , Columniform,polygonal or conical |
| Material | Usually  Q345B/A572,minimum yield strength>=345n/mm2      Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- |
| Tolerance of dimension | +- 2% |
| Power | 10Â KV ~550 KV |
| Safety Factor | Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 |
| Design Load in Kg | 300~ 1000 Kg applied to 50cm from the top pole |
| Marks | Nane plate through rivert or glue ,engrave ,emboss as per customer requirement |
| Surface treatment | Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
| Joint of Poles | Insert mode,innerflange mode,face to face joint mode . |
| Design of pole | Against earthquake of 8 grade |
| Wind Speed | 160 Km/Hour . 30 m /s |
| Minimum yield strength | 355 mpa |
| Minimum ultimate tensile strength | 490 mpa |
| Max ultimate tensile strength | 620 mpa |
| Standard | ISO 9001 |
| Length of per section | Within 14m once forming without slip joint |
| Welding | We have past flaw testing. Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1 |
| Thickness | 1 mm to 30 mm |
| Production Process | Raw material test → Cutting →Molding or bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr →Galvanization or powder coating ,painting →Recalibration →Thread →Packages |
| Packages | Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data. |
Material Test:
1. All of our material are purchased from famous mill factory to assure the quality
2. A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory; otherwise we have our reason to refuse the material.
3. Before put into production, all the material must pass the chemical and physical analysis to make sure that they have met the requested strength and component. Â
Production process:
We can design according to your demands! we can do all kinds of steel towers, Please feel free to contact us!
Blister copper (content of 99% copper) was prepared in advance as a thick plate, pure copper flakes as a cathode, with sulfuric acid (H2SO4) and copper sulfate (CuSO4) mixture as electrolyte. After power is applied, copper dissolves from the anode into copper ions (Cu) and moves to the cathode. Upon reaching the cathode, electrons are obtained and pure copper (also called electrolytic copper) precipitates at the cathode. Blister copper impurities in lively copper and zinc with copper will be dissolved as ions (Zn and Fe). Since these ions are more difficult to precipitate than copper ions, electrolysis can be avoided by appropriately adjusting the potential difference during electrolysis. Than the inactive copper impurities such as gold and silver deposition in the bottom of the cell. The copper plate so produced is called "Pure Copper Sheet (T2)" and of high quality and can be used to make electrical products. Sedimented in the bottom of the cell analogy as "anode mud", which is rich in gold and silver, is a very valuable object, remove and then processed with high economic value.
Pure Copper Sheet (T2)
Pure Copper Sheet,Pure Copper Plate,High Pure Copper Sheet,Pure Cathode Copper Sheet
Ningxia Tongji International Trade Co.,Ltd. , http://www.tongjiinternational.com