Multi-line fire alarm control system (ConventionalFireAlarmControlsystem): Different from the bus fire alarm control system (addressableFireAlarmControlsystem). Multi-line fire alarm is a system that lags behind the bus alarm. In China, the bus system must be used when the fire code requires a fire alarm system. If it is not a public place, such as a private villa, or other non-mandatory installation of fire systems, such as transformer stations, communication base stations, etc., you can choose. In addition, according to the needs of the project, it is also possible to use the supporting functions of the multi-line system, such as the need for multi-line controllers to link switch-type devices.
In foreign countries, it is generally used in villas, small-scale hotels, hotels, and residential areas. Therefore, the demand in Southeast Asia and Africa is relatively large.
First, multi-line alarm controller ConventionalFireAlarmControlpanel) - referred to as multi-line host or multi-line controller; multi-line control panel.
Multi-line host how much loop on the hero. The market's main four, eight, 16 loop (Zone / District), in addition to 2, 12 and 24 loops. Take CK1004 (4 zones), CK1008 (8 zones), CK1016 (16 zones) as an example.
Main features: power supply voltage AC90-270V, output voltage DC24V smoke per circuit: 25;
Smoke type: Conventional Smoke/Heat/Smoke&HeatDetector, or normally open signal (4-WireSmokeDetectorwithRelayOutput)
Alarm feedback output (SOUND): One for every 4 zones.
Prepare electricity: Requires two 12V/7A lead-acid batteries—Others will report the backup fault interface. Each smoke circuit has a corresponding fault and fire alarm indicator, as well as mains, backup, and mute (sound and light). , Silencer (Main Unit), Total Fault, Fire Alarm, Alarm Output Circuit Display Lamp.
Operation buttons: 5 operation buttons: Silence (fire output - sound and light mute), Mute (mute button), Test (self-test button), Reset (reset button), Mode (system setting button).
Second, multi-line smoke / temperature / smoke temperature compound: multi-line probe is universal, can be connected to any multi-line host. It can also be used with rolling shutter control box. After the probe alarms, the signal will be fed back to the controller by pulling the voltage low. The Remote LED is directly connected to the smoke detector base. After the smoke detector alarm, the corresponding door light will be activated.
Take smoke YT102 as an example. Power supply: DC9V ~ DC28V, quiescent current ≤ 60uA, alarm current ≤ 30mA, operating temperature: -10 °C ~ +50 °C.
Third, the manual alarm button (ConventionalManualCallPoint), the working voltage is DC24V, the connection mode is normally open connection method and normally closed connection method (plug the key or pull the key to start the alarm), and the series connection (all the simultaneous action of the manual participating in the series can be started Alarm) and connection method. Handwriting and smoke are connected in the same circuit.
Fourth, sound and light alarm (Soundandlightalarm / SoundStrobe), working voltage: DC24V, live sound and light alarm, connected to the alarm output circuit, play the role of fire warning and evacuation. Strobe, Bell, similar to sound and light.
In foreign countries, it is generally used in villas, small-scale hotels, hotels, and residential areas. Therefore, the demand in Southeast Asia and Africa is relatively large.
First, multi-line alarm controller ConventionalFireAlarmControlpanel) - referred to as multi-line host or multi-line controller; multi-line control panel.
Multi-line host how much loop on the hero. The market's main four, eight, 16 loop (Zone / District), in addition to 2, 12 and 24 loops. Take CK1004 (4 zones), CK1008 (8 zones), CK1016 (16 zones) as an example.
Main features: power supply voltage AC90-270V, output voltage DC24V smoke per circuit: 25;
Smoke type: Conventional Smoke/Heat/Smoke&HeatDetector, or normally open signal (4-WireSmokeDetectorwithRelayOutput)
Alarm feedback output (SOUND): One for every 4 zones.
Prepare electricity: Requires two 12V/7A lead-acid batteries—Others will report the backup fault interface. Each smoke circuit has a corresponding fault and fire alarm indicator, as well as mains, backup, and mute (sound and light). , Silencer (Main Unit), Total Fault, Fire Alarm, Alarm Output Circuit Display Lamp.
Operation buttons: 5 operation buttons: Silence (fire output - sound and light mute), Mute (mute button), Test (self-test button), Reset (reset button), Mode (system setting button).
Second, multi-line smoke / temperature / smoke temperature compound: multi-line probe is universal, can be connected to any multi-line host. It can also be used with rolling shutter control box. After the probe alarms, the signal will be fed back to the controller by pulling the voltage low. The Remote LED is directly connected to the smoke detector base. After the smoke detector alarm, the corresponding door light will be activated.
Take smoke YT102 as an example. Power supply: DC9V ~ DC28V, quiescent current ≤ 60uA, alarm current ≤ 30mA, operating temperature: -10 °C ~ +50 °C.
Third, the manual alarm button (ConventionalManualCallPoint), the working voltage is DC24V, the connection mode is normally open connection method and normally closed connection method (plug the key or pull the key to start the alarm), and the series connection (all the simultaneous action of the manual participating in the series can be started Alarm) and connection method. Handwriting and smoke are connected in the same circuit.
Fourth, sound and light alarm (Soundandlightalarm / SoundStrobe), working voltage: DC24V, live sound and light alarm, connected to the alarm output circuit, play the role of fire warning and evacuation. Strobe, Bell, similar to sound and light.
Komatsu Cab Parts,Komatsu Cab Door Parts,Komatsu Cab Genuine Part,Komatsu Excavator Cab Parts
JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.sdkomatsuloaderparts.com