Part1: Pick a good energy-saving faucet to help you save money
Small faucet, seemingly inconspicuous, what is the loss that can be brought to consumers in the event of quality problems? The water is full of Jinshan, the night of the cold house is leaking; the heart has a lingering water, the water pipe is shocking; the lead is invisible, the inferior quality is hidden Very; do not know how deep, hate not to tell when the purchase, small taps, seemingly inconspicuous, which is great. How much does the faucet purchase and use?
Myth 1: The most water-saving faucet
Many consumers feel that the sensor faucet is convenient and saves water, but in fact, the sensor faucet not only has a small amount of water, but also has a high price and a high maintenance cost. Induction faucets are generally installed in public places, office buildings and government units. However, the use of induction faucets in the home is not practical, and the maintenance is time-consuming and labor-intensive.
Small series of tricks: not only the sensor tap can save water, manual taps also save water and energy. Manual faucets not only have a long life, but are also easy to repair, which is relatively more cost effective. If you feel that the switch is troublesome, you can choose to install the push-type faucet, which is convenient for not having to rotate, and can achieve the effect of water-saving timed water, relatively cheap, and cost-effective.
Myth 2: The smaller the flow, the more water saving
The faucet flow has a water-saving standard, and the flow is too large or too small to be conducive to water saving. Many people have this misunderstanding, thinking that the faucet with a small flow can save water. The water consumption is equal to the flow rate multiplied by the water use time. If the flow rate is too small, the water use time will be significantly prolonged and the water saving effect will not be achieved. Sometimes the flow rate of the faucet is too small, there may be problems with the faucet valve, or the slag is clogged, it should be cleaned or replaced in time, so don't think that the flow is less.
Small series of tricks: It is recommended to pay attention to the cleaning of the faucet, timely cleaning and replacement of the faucet valve and the filter net, so as to keep the water clean and hygienic, and thus protect the health of people. Water is the source of life, so it is related to the health problems of water. It cannot be neglected. The hygiene of faucets is the foundation. The clean and bright appearance does not mean the cleanliness of the interior.
Myth 3: The bubbler faucet saves water in any situation.
The water outlet of the faucet has two parts, which are composed of an outer layer of filter net and a bubbler inside. The bubbler function mainly increases the number of bubbles in the water and reduces the amount of water, so that the water does not splash and control the flow rate, so that it can reach a certain level. Water saving effect. However, in all cases, the faucet of the bubbler is water-saving, which weakens the impact of the water flow and reduces the ability to wash and decontaminate. Therefore, when cleaning very dirty things, it must be cleaned with a large amount of water, which is not conducive to water saving. .
Small series of tricks: When choosing a faucet with a bubbler, you need to pay attention to the installation position. The washbasin and the kitchen sink can be installed with a faucet with a bubbler. The floor tow pool installed in the balcony does not need to use the faucet with the bubbler, which can speed up the washing and dragging, and can increase the flushing capacity, which has a certain water saving effect.
Part2: Toilet picking mistakes carefully selected to buy good goods
With the popularity of the environmental protection concept in the home industry, in recent years, water-saving toilets have continued to appear in the market. However, is the water-saving toilet really water-saving? Some toilets that are called water-saving are actually a waste of water. Some merchants use the concept of propagating water-saving to be partial and full, but there are standards in the industry but it is difficult. Execution, consumers are difficult to identify when purchasing.
Misunderstanding 1: The lower the displacement, the more water saving
Since the promulgation of the new national standard, the non-water-saving toilets have almost disappeared. The toilets sold in the market are all called water-saving toilets. But in the end, what is the real water-saving toilet, some businesses themselves have not figured out, consumers are more "fog in the flowers." Some consumers are immersed in the "water saving" misunderstanding, thinking that the smaller the displacement of the toilet, the less the displacement is equal to water saving, and the water storage time in the toilet is longer and easier to clean.
Small series of tricks: Now, the most suitable water-saving toilet should be between 4.5 and 6 liters. Controlling this water range ensures that the dirt can get out of the sewage pipe 12 meters away and save the most water. This is the real water-saving toilet. Consumers do not have to spend a lot of money on the purchase of “over-water-saving†products when they buy.
Myth 2: Water saving ignores flushing
The sanitary products are not water-saving, and we can't just focus on the surface number of “how much water to put at one timeâ€. The key is to see if “the water can be flushed once.†Some consumers who seem to understand and understand, just look at the name of the small amount of flushing, they bought some so-called water-saving toilets, but in the end not only failed to save water, but also made the toilet clean. Clean, affecting daily cleaning and maintenance.
Small series of tricks: water-saving toilets can not rely on the displacement to determine its water-saving effect, water-saving depends on the flushing method of the toilet. Generally, the most water-saving flushing method is jet siphon flushing. This method brings less noise and strong sewage discharge capacity. It is a real water saving. It only needs 4.5-5 liters of water to completely Cleaned.
Myth 3: Ignore the deodorant and leakproof function
What is the real water-saving toilet? In addition to its actual water-saving function, some small details will affect the water-saving effect of the toilet. Some consumers have chosen the toilets with the same drainage and flushing methods when they are selected. However, they have found that their odor and leakage prevention effects are not good. As a result, they need to be cleaned and deodorized frequently, and maintenance is more wasteful.
Small series of tricks: the deodorant function of the toilet is not good because the water seal is not qualified or the depth is not enough, the water seal height of the general toilet is 7 to 10 cm upward from the lower flap of the toilet, if it is larger or smaller than this The range is unqualified; the surface area of ​​the toilet water seal shall not be less than 100 mm × 85 mm. If the water seal does not meet the above criteria, it will reduce the deodorizing ability of the toilet and cause pollution.
Part3: There is a mistake in the choice of showers, so that the business lied to you
The so-called shower is actually known as the sprinkler, which is generally suitable for the bathroom, and is an essential home bathroom product for modern home life. Don't look at the shower is just a small object, but its price is very different, and its role can not be underestimated. If you think about it when you are shopping, you will still fall into the wrong buying.
Myth 1: The higher the price, the better the quality.
Many consumers think that the more expensive the product, the better, as the average consumer does not have to pursue too high-end products. Some consumers believe that water conservation is a high-tech, water-saving performance shower, it must be high prices. In fact, some products are likely to be expensive, consumers can not blindly seek for expensive, think that imported things are high-end, specifically picking expensive goods.
Xiaobian Zhizhao: It is not only expensive or imported showers that are of good quality and water-saving. Some domestic brands also have a lot of low-cost water-saving showers. These showers are equipped with special water-saving devices at the tail thread joints, which are 20%-50% less than ordinary showers.
Myth 2: The shower can be used without changing
Many consumers think that shower products will be installed once and for all, and they do not need to be replaced as long as they are not broken. Moreover, the amount of water used for a long time has been reduced, and consumers think that they can save a certain amount of water. In fact, the amount of shower water is small because it contains dirt and dirt, which affects the quality of water. Therefore, the shower is not usable.
Xiaobian Weapons: It is recommended to pay attention to the service life and production date when purchasing shower products, and choose a shower with a relatively long service cost. This will give you the dominance, and the replacement of the shower will not cause too much loss. . In addition, if the showers in the home begin to reduce the amount of water, they must be cleaned regularly and replaced in time. Otherwise, it will not only save water, but also affect the safe use of water at home.
Myth 3: Guan Jiner is very strict
When some consumers buy showers, they think that the greater the strength of the switch, the better the tighter the prevention of water leakage, the more energy can be saved. In fact, this will not only prevent leakage, but it will represent a problem in the structure or quality of the sealing valve. In addition, many users will make it more secure when the shower is turned off, which will damage the sealing valve and cause the shower to become less tight.
Small series of tricks: When purchasing a shower switch, pay attention to the switch should be elastic, so that it can be easily controlled. In addition, when the shower is used daily, the switch does not need to be too hard, which can easily damage the switch of the product. Those who are used to such a friend must change this consciousness.
Product Description
PVDF rod with 20-150mm diameter
Description
PVDF has high strength, super chemical resistance, high temperature resistance, UV resistance. What's more, its dielectrical property is also very good. Compared with PTFE, it has higher surface hardness. The global production capacity of PVDF is only next to PTFE in the fluoropolymer family
Characteristics
-Excellent chemical resistance
-High toughness and rigidity
-Good dielectrical properties
-Good UV and radiation resistance
-Easy to machine
-Good sliding resistance,
-High wear resistance
-Nice dimensional stability
Applications
Silicon chip carrier
PVDF nozzle
Technical Data Sheet
PROPERTIES Test Method Unit Value
I.Physical Properties
Density ISO 1183 g/cm3 1.8
Water absorption 24hrs ISO 62 % <0.05
II.Thermal Properties
Heat deflection temperature - HDT/A ISO 75-2 ºC 104
Min. service temperature ºC -40
Max. service temperature-Long Term ºC 150
Thermal conductivity at 23 ºC DIN 11359 W/(K*m) 0.13
Coefficient of linear thermal expansion ISO 11359 10-4*K-1 0.2
Flammability Rating(6mm thickness) UL 94 - V-0
III.Mechanical Properties at 23ºC
Tensile strength at yield ISO 527-2 MPa 50
Tensile strength at break ISO 527-2 Mpa 46
Elongation at break ISO 527-2 % ≥50
Modulus of elasticity after tensile test ISO 527-2 MPa 2,000
Modulus of elasticity after flexural test ISO 178 MPa 2,000
Hardness - Shore D DIN 53505 78
Charpy impact strength ISO 179 kJ/m2 N. B.
Friction coefficient DIN 53375 0.33
IV.Electrical Properties at 23ºC
Dielectric constant at 1 MHz IEC 60250 106Hz 7.25
Dielectric loss factor at 1 MHz IEC 60250 106Hz 0.18
Volume resistively IEC 60093 Ohm (Ω) * cm ≥1013
Surface resisively IEC 60093 Ohm (Ω) ≥1014
Dielectric strength IEC 60243-1 kV/mm 22
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
Statement:
Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability.
Engineering Plastics Products,Engineering Plastics,Engineered Plastics
ZHENJIANG CHUNHUAN SEALING MATERIALS CO.,LTD(GROUP) , https://www.chsealing.com