A good equipment needs a good maintenance method, and the bus processing machine needs a correct operation mode. For the bus processing machine, due to improper operation, it is likely to damage the service life of the equipment. Therefore, here we remind the majority. The customer must follow the instructions provided by the bus processing machine. Only correct and reasonable operation can extend the service life of the equipment and ensure the safety of the operators themselves. If you need a manual for the bus processing machine, please go to the resource download center of the website to download. By changing the bending die, the flat bending, vertical bending, embossing and flattening of the workpiece can be completed; the busbar bending of different thicknesses can be controlled by adjusting the sensing switch of the working cylinder, and the displacement stroke counter corresponds to different numbers. The busbar processing machine can complete the corresponding bending angle. Loading, commissioning (moulding, adjusting blade clearance) or dismantling the mold must be carried out by personnel familiar with the machine in accordance with the prescribed procedures. The machine is equipped with three processing units for punching and shearing. The manual or foot switch can be used for punching, shearing and folding of the busbars separately or simultaneously. The machine is highly efficient and easy to use. The working stroke of each processing unit can be easily adjusted to reduce processing time and increase production efficiency. The busbar processing machine can also perform a variety of machining functions by changing the mold, such as punching long round holes, folding straight bends, flattening bends, embossing and flattening. Http://
There are five general body styles of ball Valves: single body, three-piece body, split body, top entry, and welded. The difference is based on how the pieces of the valve-especially the casing that contains the ball itself-are manufactured and assembled. The valve operation is the same in each case.
In addition, there are different styles related to the bore of the ball mechanism itself.
Ball valves in sizes up to 2 inch generally come in single piece, two or three piece designs. One piece ball valves are almost always reduced bore, are relatively inexpensive and generally are throw-away. Two piece ball valves are generally slightly reduced (or standard) bore, they can be either throw-away or repairable. The 3 piece design allows for the center part of the valve containing the ball, stem & seats to be easily removed from the pipeline. This facilitates efficient cleaning of deposited sediments, replacement of seats and gland packings, polishing out of small scratches on the ball, all this without removing the pipes from the valve body. The design concept of a three piece valve is for it to be repairable.
Stainless Steel Ball Valves, Brass Ball Valves, Sanitary Ball Valves, Water Ball Valves
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsir-valves.com