Lipson Plastics Brand: Your Choice, Our Promise!

1. The recognized leader in the thermoplastic extrusions and injections over 40 years

2. The comprehensive quality program and operational control system- QMS, 24-hour Rigorous QC Team which is ISO 9001 Certified

3. The two main manufacturing facilities in China( Xiamen) and in Indonesia Jakarta

4. All-rounded quality system provide high quality products with competitive price

5. Global Market: USA, Canada, Singapore, Indonesia, New Zealand, Australia, England, Sudan, Asia and Africa ect.

Our pipes and fittings can be made, according and conforming to the following International Standards:

1) American Standard (Sch 40 & Sch 80) SDR 21, 26, 41

2) British Standard (BS 3505, 5255, 4515, EN 1452, EN 1401)

3) Singaporean Standard (SS141, 272, 213)

4) Australian Standard (AS/NZS 1477, 1415, 1260, 1254)

5) Japanese standard (JIS K 6742, JIS K 6741, JIS K 6743, JIS K 6739)

6) National standard (GB 10002, GB 5836, GB 14823, GB 13664)

7) International standard (ISO 4422, ISO 3633, IEC 614, GY 3050)


Pipe Advantage:

1. High Heat Resistance: Allows transportation of hot liquid and high temperature chemicals below 93 degree celsius

2. Corrosion resistance: Relatively inert with many chemicals

3. Heat insulation properties: 1/360 of steel pipes

4. Smooth wall surface: Reduce invasion of microbes and other foreign particles

5. Compliance with the dissolution test: No effect on water quality6. Electrical insulation properties: Suitable for use as high voltage electrical power-lines

7. Cold bonding of cement allows simple and economical installation

About us:
1) Management: Wholly Foreign owned with Singapore-based Management Team
2) Machinery: Imported German-made Extrusion Machinery (Krauss Maffei), one of the best in the world
3) Experience: Over 40 years of experience in Plastics Extrusion and injection
4) Quality Assurance: 24-hour Rigorous QC Team which is ISO 9001 Certified
5) Laboratory: A complete system of up-to-date testing equipment
Lipson Plastics Brand: Your Choice, Our Promise!

1. The recognized leader in the thermoplastic extrusions and injections over 40 years

2. The comprehensive quality program and operational control system- QMS, 24-hour Rigorous QC Team which is ISO 9001 Certified

3. The two main manufacturing facilities in China( Xiamen) and in Indonesia Jakarta

4. All-rounded quality system provide high quality products with competitive price

5. Global Market: USA, Canada, Singapore, Indonesia, New Zealand, Australia, England, Sudan, Asia and Africa ect.

Our pipes and fittings can be made, according and conforming to the following International Standards:

1) American Standard (Sch 40 & Sch 80) SDR 21, 26, 41

2) British Standard (BS 3505, 5255, 4515, EN 1452, EN 1401)

3) Singaporean Standard (SS141, 272, 213)

4) Australian Standard (AS/NZS 1477, 1415, 1260, 1254)

5) Japanese standard (JIS K 6742, JIS K 6741, JIS K 6743, JIS K 6739)

6) National standard (GB 10002, GB 5836, GB 14823, GB 13664)

7) International standard (ISO 4422, ISO 3633, IEC 614, GY 3050)


Pipe Advantage:

1. High Heat Resistance: Allows transportation of hot liquid and high temperature chemicals below 93 degree celsius

2. Corrosion resistance: Relatively inert with many chemicals

3. Heat insulation properties: 1/360 of steel pipes

4. Smooth wall surface: Reduce invasion of microbes and other foreign particles

5. Compliance with the dissolution test: No effect on water quality6. Electrical insulation properties: Suitable for use as high voltage electrical power-lines

7. Cold bonding of cement allows simple and economical installation

About us:
1) Management: Wholly Foreign owned with Singapore-based Management Team
2) Machinery: Imported German-made Extrusion Machinery (Krauss Maffei), one of the best in the world
3) Experience: Over 40 years of experience in Plastics Extrusion and injection
4) Quality Assurance: 24-hour Rigorous QC Team which is ISO 9001 Certified
5) Laboratory: A complete system of up-to-date testing equipment

Elevator Control Modernization

Elevator Control Modernization, Elevator Controller Modernization, Elevator Control System Modernization, Elevator Complete Control System Modernization

REASONS TO MODERNIZE YOUR ELEVATOR CONTROLS:

• You are experiencing higher repair costs related to controls
• Inefficient, poor reliability and operation
• Public safety considerations
• Long customer/tenant wait times
• Increased shutdowns and entrapments
• Landing and leveling problems
• Poor ride quality
• Decrease energy costs
• Serviceability/Proprietary Controls
• Obsolescence
  

CEP Elevator Products specializes in custom elevator control modernization, ranging from simple updating of controls, cab and hall fixtures, to extensive replacement of all your existing elevator equipment. Elevator modernizations keep older buildings competitive with newer buildings, and typically provide a good financial return on your building as well as improving your elevators safety, reliability and performance. Depending on the age and condition of your elevator equipment, the extent of the modernization may vary. We can provide you with a free survey of your current equipment, and provide detailed information regarding the range of options for your upgrade. In addition to increasing the reliability and performance of your elevator, We will bring your elevator equipment up to current codes.

We only uses the best available equipment when performing modernizations. All modernizations begin with non-proprietary control systems and equipment which will enable you to use any qualified elevator service company of your choice to maintain your equipment in the future. Many large, international companies will only install their own proprietary controls and equipment which make it virtually impossible for building owners to change service companies down the road, regardless of the quality of service. This not only locks the building owner to one service company for the life of the equipment, it can also be costly in higher repair and maintenance costs.

After performing modernizations for over two decades, We have the experience and expertise to select the best individual components for your elevator. Many companies try to save money by cutting corners and using lower quality components; however we believe that the slightly higher price of the best components is well worth the cost to ensure that you not only get the look you expect, but also the performance and reliability for many years to come.

Elevator Control Modernization, Elevator Controller Modernization, Elevator Control System Modernization, Elevator Complete Control System Modernization

CEP Elevator Products ( China ) Co., Ltd. , https://www.zjelevatortravelingcable.com