Exin Diamond Materials Co., Ltd. launched high-performance pre-alloy powder

The performance of the diamond tool carcass is one of the most critical factors affecting the cutting performance of diamond tools. Therefore, using a suitable process to control or adjust the performance of the carcass material has special significance for stabilizing and improving the quality of the diamond tool. From the composition of the carcass material, it is mainly composed of elemental metal powder and copper alloy powder. The process of pressing and sintering after mechanical mixing. The advantage is that the composition and performance can be adjusted in a wide range, but the influence factors of using the elemental powder are many, and therefore, the sintering quality of the carcass is difficult to control. Prealloyed powders are proposed for the shortcomings of such mechanically mixed carcass powders commonly used in the manufacture of domestic diamond tools. Exin Diamond Materials Co., Ltd. has tried to make diamond tools by using pre-alloyed powder instead of elemental metal powder, thus accumulating rich application experience. The company has extensively absorbed advanced atomization manufacturing technology and technology at home and abroad. With its excellent professional technical team, the company has established a unique high-pressure water atomization production line, and independently developed and produced the multi-element pre-alloyed powder brand represented by EXD series. The pre-alloyed powder produced by the company not only reduces the cost; it completely alloys the carcass after use; reduces the amount of diamond used; improves the quality stability of the diamond tool; and has many advantages that some manufacturers do not have: High purity raw materials and auxiliary materials, high purity powder. 2. The special slag deoxidation process is adopted, and the powder has low oxygen content. 3. Using a unique atomization process, the powder particles are fine. 4. The special post-treatment process is adopted, and the powder has good cold press formability. 5. Advanced anti-oxidation treatment method, the powder has good oxidation resistance. 6. Adopt strict quality control system and high powder stability. In addition, with the gradual enhancement of the performance requirements of diamond tools for difficult-to-machine materials, it has become an inevitable trend to replace the traditional elemental metal powder with high-quality fine pre-alloyed powder.

T&Square Bolt

The national standards for T-bolts are as follows:

GB / T 2165-1991 machine tool fixture parts and components T-groove quick release Bolt (obsolete) was adjusted to JB / T 8007.2-1995, and then replaced by JB / T 8007.2-1999 | machine tool fixture parts and components T-groove quick release bolt

Bolts for T-groove (GB / T 37-1988)

There is also mechanical standard: JB / T 1709-1991 T-bolt (obsolete), replaced by JB / T 1700-2008 valve parts nut, bolt and plug

At present, din186 T-type square neck bolts, GB 37, din188t type double neck bolts are commonly used. The materials are carbon steel, stainless steel, alloy steel, etc. the specifications range from m8-m64. Musheng, a domestic high-quality hardware manufacturer with good quality control, has formed a mature process.

T Bolt,Hammerhead T Bolts,Harden T Slot Bolt,Hex Head Flange Bolt

Suzhou Gubao Screws Co.,Ltd. , https://www.gbscrewes.com