Explosion-proof electrical safety measures for electricity use 1. The construction site electricity must be managed in a unified manner, and daily and regular maintenance work must be strengthened to detect and eliminate hidden dangers in a timely manner. Regular inspections and assessments of on-site electrical safety conditions are conducted.
2. The electrician must hold a certificate, and must wear a variety of insulating protective equipment during operation. It must not be operated in violation of regulations. Non-electricians are not allowed to perform electrical work.
3. In the event of an electrical fire, immediately cut off the power supply, use dry sand to extinguish the fire, or use a dry powder fire extinguisher to extinguish the fire. Do not use a conductive fire extinguishing agent to extinguish the fire.
4. Safe lighting must be used for all lighting in mobile lighting, humidity, and in locations where electricity is easily accessible.
5. It is forbidden to use plastic warp threads in the construction site.
6. The fuses used in electrical equipment must not be replaced with other metals and must match the capacity of the equipment.
7. The metal shell of electrical equipment must be grounded or zero-protected. In the explosion-proof enclosure and explosion-proof enclosure, the leakage protection device can be installed according to the actual situation.
8. Explosion-proof electrical operators strictly implement electrical safety operating procedures, and conduct periodic inspections and tests on electrical equipment tools, and any unqualified electrical equipment or tools must be stopped.
9. Explosion-proof distribution box and explosion-proof control box shall be set at dry, ventilated and normal temperature places (except special materials stainless steel, custom-made engineering plastic material box), and the installation shall be correct and firm. The leakage protection device must be installed in the box. All electrical equipment at the construction site must be installed with leakage protection devices at the head end of the equipment load except for zero protection.
2. The electrician must hold a certificate, and must wear a variety of insulating protective equipment during operation. It must not be operated in violation of regulations. Non-electricians are not allowed to perform electrical work.
3. In the event of an electrical fire, immediately cut off the power supply, use dry sand to extinguish the fire, or use a dry powder fire extinguisher to extinguish the fire. Do not use a conductive fire extinguishing agent to extinguish the fire.
4. Safe lighting must be used for all lighting in mobile lighting, humidity, and in locations where electricity is easily accessible.
5. It is forbidden to use plastic warp threads in the construction site.
6. The fuses used in electrical equipment must not be replaced with other metals and must match the capacity of the equipment.
7. The metal shell of electrical equipment must be grounded or zero-protected. In the explosion-proof enclosure and explosion-proof enclosure, the leakage protection device can be installed according to the actual situation.
8. Explosion-proof electrical operators strictly implement electrical safety operating procedures, and conduct periodic inspections and tests on electrical equipment tools, and any unqualified electrical equipment or tools must be stopped.
9. Explosion-proof distribution box and explosion-proof control box shall be set at dry, ventilated and normal temperature places (except special materials stainless steel, custom-made engineering plastic material box), and the installation shall be correct and firm. The leakage protection device must be installed in the box. All electrical equipment at the construction site must be installed with leakage protection devices at the head end of the equipment load except for zero protection.
Stainless Steel Barbecue Grill Grate
Barbecue wire Grill Grate is made of high quality 304 stainless steel, never rusting and durable. BBQ Wire mesh does not have any coating or chemical ingredients, making food safer.
Multi-functional Grill Cooking Grid Grate: This wire mesh is mainly used for BBQ Grill Mat for outdoor cooking, it can also be used as a cooling and baking rack. Or you can develop other uses for it.
stainless steel wire grill grate,stainless steel BBQ grate, BBQ grill grate,BBQ grill grate custom
Shenzhen Lanejoy Technology Co.,LTD , https://www.szsmallcompressionspring.com