The so-called exemption clause is often written into a contract or a format contract by a party to the contract as an express or implied meaning offer to obtain the other party’s promise to make it legally effective. For each family, the decoration is very important. When the renovation is completed, although some products are still in the warranty period, due to the scope of the warranty and various exemptions, the owner still needs to bear the maintenance costs.
The exemption clauses required for the purchase of the floor, and hope that the owners in the signing of the contract, must pay attention to these terms and do not push themselves to the "dead."
1, the pipeline seepage
This has a great impact on the wooden floor, especially if there is a keel underneath. If there is water seepage at the bottom of the pipeline, the keel will slowly accumulate water, and all of a sudden, it will not be known. If this situation is not broken when installing the floor, the merchant will certainly not be responsible.
2, horizontal assembly span is too large
Each floor has a certain range of expansion and contraction, and the expansion and contraction gaps should be reserved around the wooden floor corners. However, when the number or the total width of the wood flooring is too large (solid wood is generally not more than 4 meters and multi-layer composite is not more than 5 meters), the expansion joints are not enough, and basically they are divided into two assembly areas. Bridge in the middle. Some people don't like the transfer batten in the middle. They think this is not good-looking, but if they don't do it, and the floor expands and arches or tiles change, they leave a reason for the company to refuse to be responsible.
3, sun exposure
The windows (especially the floor-to-ceiling windows) are stripped of paint, shrinkage and cracking, discoloration, and aging. These phenomena are basically caused by direct sunlight or exposure to sunlight for a long time. If other floors are in good condition and there are only these problems at the window, businesses generally will not admit that they have problems with the floor.
4, long-term vacant housing unoccupied
The floor moisture content is a national standard. If the floor moisture content is factory-wide, it means the floor is qualified. However, a floor with acceptable moisture content does not have to be a problem. According to a lot of statistics, the floor has been installed, but no one has lived for a year and a half (especially during the hot summer and rainy seasons). Even qualified floors are prone to problems. This kind of repayment claims that the floor has bulged and shrunk, but there is no data to prove that it is caused by the unqualified floor water content. Then we can only suffer a loss. Therefore, after the installation of the floor is not ready to live in, pay special attention to ventilation and cooling, dehumidification or humidification and other maintenance.
5, chemical reaction corrosion
The paint on the floor is in contact with other corrosive chemicals and causes peeling of the floor paint due to chemical reactions. It seems that a very reasonable exemption clause is really justified. When these problems occur, is there a third party as an accreditation body that justly and reasonably discriminates the reasons for the emergence of problems? The lack of roles allows each time Warranty will evolve into a dispute, the ambiguity of the determination of liability, so that the warranty will inevitably become an endless hard road. If the problem is caused by improper use of personal goods and the loss is borne by the consumer, then some of the exemption clauses have become a weapon for businesses to avoid liability.
1.with 3000 square meter factory about 35 workshop workers and 25 office workers.
2.More than 20 sets of advanced machines with more than ten years domestic trade experience and international trade experience.
5. Excellent DC brushless motor , high wear-resistant qualities wheels and reasonable structure design makes it more stable, quiet, longer life