On March 9, 2018, the 2018 User Liaison Network Annual Conference hosted by China Machine Tool Industry Association was held in Beijing. As a platform for communication and communication between industries, the annual user network meeting, which was founded in 1999, has played a very good role in promoting cooperation and development among industries, and has therefore received more and more attention and support from colleagues in the industry. . The conference attracted more than 100 representatives from aviation, aerospace, automotive, weapons, ships, environmental protection machinery, molds, electronics, railways, general machinery, electric power, heavy machinery, internal combustion engines, liquid gas tight, coal mines. More than 20 industries including machinery, engineering machinery, bearings, gears, plastic machinery, textile machinery, maintenance and transformation, agricultural machinery, metallurgy, etc., representatives of some brother associations, universities and professional media also attended the meeting. The meeting also specially invited representatives of several machine tool industry companies and some machine tool tools associations to participate in the exchange. Mao Yufeng, executive vice chairman of the China Machine Tool Industry Association, and Secretary General Wang Liming attended the meeting. The meeting was hosted by Wang Liming and delivered a welcome speech. 
The conference is still based on the basic tenet of communication, cooperation and win-win, close industry and supply and demand. Focusing on the theme of “communication, innovation and developmentâ€, we will jointly study and explore the road of joint development under the new situation. In his speech, Wang Liming pointed out that machine tools, as basic equipment, play an important supporting role in the national economy and national defense construction. The development of the machine tool industry is inseparable from the support and assistance of various user industries. We sincerely hope that all delegates can make full use of the user network to carry out extensive and in-depth exchanges, and strive to be enlightened, rewarded and helpful for the work of the new year. The meeting consisted of several topics, including comprehensive reports, special reports, typical case sharing, technical lectures, and exchange speeches. Tu Jingxian, director of the Marketing Department of China Machine Tool Industry Association, first made a comprehensive report to the conference, summed up the work of the user network in 2017, and informed the economic operation of the industry. In introducing the basic situation of the upcoming 10th China CNC Machine Tool Exhibition (CCMT2018), it specifically mentions the new website launched on the website. This is a new development of the China Machine Tool Industry Association for the current mainstream communication and reading methods. The service tool is set in the bottom menu of the machine tool association WeChat subscription number and service number (scan QR code plus attention), exhibitors and visitors can easily and quickly check CCMT2018 exhibitors, exhibits and other related information on the mobile phone. 
In the special report session, Zhou Minsen, an expert in the marketing department, and Li Lei, the deputy director of the marketing department, introduced the highlights of CCMT2018 and the new technologies and new products displayed by EMO2017. The CCMT2018 exhibits were summarized and summarized, and the European Machine Tool Show was summarized. The latest technology development trend has won the unanimous praise of the participants. The typical case sharing is the newly opened communication mode of this conference. The supply and demand side jointly introduced the “Key Technology and Industrialization of High Performance CNC System†project, which was completed by the cooperation. The project won the second prize of 2017 National Science and Technology Progress Award. Deputy Director Zhou Jinqiang of Shanghai Aerospace Equipment Manufacturing Co., Ltd. introduced the demonstration application of domestic CNC machine tools. Representatives of Shanghai Tuoyu CNC Technology Co., Ltd. and Guangzhou CNC Equipment Co., Ltd. introduced their respective technologies and equipment features. Zhou Jinqiang said that the manufacturing of parts in the aerospace field is very demanding on machine tools. The quality and reliability of domestic CNC machine tools have been further improved in the demonstration application process. He also proposed new requirements for domestic CNC equipment in the future. Professor Wang Dequan of Dalian University of Technology made a technical report entitled “Intelligent Manufacturing to Realize Enterprise Transformation and Enhance Enterprise Valueâ€, and introduced intelligent technology from several aspects such as product design, manufacturing and service. During the conference exchange period, Li Xingbao, the technical center of Jiangsu Yawei Machine Tool Co., Ltd., introduced their useful attempts in smart manufacturing and related intelligent equipment, indicating that the company is building a flexible intelligent manufacturing solution with modular design to meet the user's personality. Demand. Manager Wang Erjie of Zhejiang Heideman Machine Tool Co., Ltd. introduced Heidemann's intelligent equipment and its technical features. Liu Zongyi, Chairman of the Machine Tool Association Distributors Branch, introduced the main work and many attempts made by the club in the past two years, and said that in the new era, dealers should also develop from simple sellers to service providers. During the free speech and communication period, user representatives from the fields of automobile, aerospace and molds spoke enthusiastically, fully affirmed the work of the user network, introduced the basic situation of the enterprises in their respective industries, and expressed their desire to work with the machine tool industry. Close communication and cooperation, and strive to make new contributions in the localization of equipment in key areas. Finally, the Executive Vice President of China Machine Tool Industry Association Mao Yufeng made a concluding speech, briefly summarized the speeches of the delegates of the conference, emphasized the duties of the industry associations, and said that strengthening the communication between the machine tool industry and users is the organization of the user network. The original intention and motivation are, I hope that the user field will continue to pay attention to the latest development of the machine tool industry, and sincerely invite representatives to visit CCMT2018 on April 9-13.
The conference is still based on the basic tenet of communication, cooperation and win-win, close industry and supply and demand. Focusing on the theme of “communication, innovation and developmentâ€, we will jointly study and explore the road of joint development under the new situation. In his speech, Wang Liming pointed out that machine tools, as basic equipment, play an important supporting role in the national economy and national defense construction. The development of the machine tool industry is inseparable from the support and assistance of various user industries. We sincerely hope that all delegates can make full use of the user network to carry out extensive and in-depth exchanges, and strive to be enlightened, rewarded and helpful for the work of the new year. The meeting consisted of several topics, including comprehensive reports, special reports, typical case sharing, technical lectures, and exchange speeches. Tu Jingxian, director of the Marketing Department of China Machine Tool Industry Association, first made a comprehensive report to the conference, summed up the work of the user network in 2017, and informed the economic operation of the industry. In introducing the basic situation of the upcoming 10th China CNC Machine Tool Exhibition (CCMT2018), it specifically mentions the new website launched on the website. This is a new development of the China Machine Tool Industry Association for the current mainstream communication and reading methods. The service tool is set in the bottom menu of the machine tool association WeChat subscription number and service number (scan QR code plus attention), exhibitors and visitors can easily and quickly check CCMT2018 exhibitors, exhibits and other related information on the mobile phone. In the special report session, Zhou Minsen, an expert in the marketing department, and Li Lei, the deputy director of the marketing department, introduced the highlights of CCMT2018 and the new technologies and new products displayed by EMO2017. The CCMT2018 exhibits were summarized and summarized, and the European Machine Tool Show was summarized. The latest technology development trend has won the unanimous praise of the participants. The typical case sharing is the newly opened communication mode of this conference. The supply and demand side jointly introduced the “Key Technology and Industrialization of High Performance CNC System†project, which was completed by the cooperation. The project won the second prize of 2017 National Science and Technology Progress Award. Deputy Director Zhou Jinqiang of Shanghai Aerospace Equipment Manufacturing Co., Ltd. introduced the demonstration application of domestic CNC machine tools. Representatives of Shanghai Tuoyu CNC Technology Co., Ltd. and Guangzhou CNC Equipment Co., Ltd. introduced their respective technologies and equipment features. Zhou Jinqiang said that the manufacturing of parts in the aerospace field is very demanding on machine tools. The quality and reliability of domestic CNC machine tools have been further improved in the demonstration application process. He also proposed new requirements for domestic CNC equipment in the future. Professor Wang Dequan of Dalian University of Technology made a technical report entitled “Intelligent Manufacturing to Realize Enterprise Transformation and Enhance Enterprise Valueâ€, and introduced intelligent technology from several aspects such as product design, manufacturing and service. During the conference exchange period, Li Xingbao, the technical center of Jiangsu Yawei Machine Tool Co., Ltd., introduced their useful attempts in smart manufacturing and related intelligent equipment, indicating that the company is building a flexible intelligent manufacturing solution with modular design to meet the user's personality. Demand. Manager Wang Erjie of Zhejiang Heideman Machine Tool Co., Ltd. introduced Heidemann's intelligent equipment and its technical features. Liu Zongyi, Chairman of the Machine Tool Association Distributors Branch, introduced the main work and many attempts made by the club in the past two years, and said that in the new era, dealers should also develop from simple sellers to service providers. During the free speech and communication period, user representatives from the fields of automobile, aerospace and molds spoke enthusiastically, fully affirmed the work of the user network, introduced the basic situation of the enterprises in their respective industries, and expressed their desire to work with the machine tool industry. Close communication and cooperation, and strive to make new contributions in the localization of equipment in key areas. Finally, the Executive Vice President of China Machine Tool Industry Association Mao Yufeng made a concluding speech, briefly summarized the speeches of the delegates of the conference, emphasized the duties of the industry associations, and said that strengthening the communication between the machine tool industry and users is the organization of the user network. The original intention and motivation are, I hope that the user field will continue to pay attention to the latest development of the machine tool industry, and sincerely invite representatives to visit CCMT2018 on April 9-13.LED Sensor Batten Lights has options of microwave sensor and infrared sensor. There are two sensing modes. One is 0-10v dimming, and the other is on/off.
The main difference between these two modes is that the 0-10v dimming mode can set the brightness of the light after the person walks, and the pending time of this brightness can also be set. On/off mode, you can only set the time for the lights to turn off after a person walks, but not the brightness (that is, functions 3, 4 cannot be implemented). The 0-10v dimming mode is more intelligent.
Briefly introduce the function of sensor light:
1. Set up daylight threshold: If the ambient light is higher than the set brightness, the sensing function will not be triggered.
2. Set up the hold time: The time for the light to maintain brightness after the person walks away.
3. Set up a stand-by dim level: set the brightness maintained after the person walks
4. Set up stand-by time: After the person walks, the time to maintain low brightness
5. Set up detection area: Set the detection area.
Toggle button can set the remote distance of remote control and sensor.
If you need sensor lights in factories or warehouses, corridors, or other indoors, you can choose this LED Sensor batten lights. If you need IP66 sensor light, you can choose Sensor Waterproof Light.
Motion Sensor Led Light,Sensor Led Light,Motion Sensor with Led Light,Led Light Motion Sensor
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.szlitehomelight.com