The detailed classification and purchase method of hardware products are divided into common hardware and special hardware according to the function. Ordinary hardware is divided into hinge rails, decorative handles and decorative locks according to the setting method; special hardware is divided into bathroom hardware and kitchen pendant according to the setting method.
In the purchase of hardware accessories, you should choose the hinges, slide rails, locks and hinges with good sealing performance; choose the locks with good flexibility and performance. When you purchase, you can have the key to plug and unplug several times to see if it is smooth or not. Provincial strength; select a variety of decorative hardware with good appearance and performance.
1, skirting board
Skirting boards are often overlooked. In fact, the first problem with kitchen cabinets is probably it. Because it is closest to the ground, if the ground is very moist, it is likely to swell and mold. The skirting board has two kinds of wooden skirting boards and matte metal skirting boards. Wooden skirting board manufacturers generally use the corner scrap left when the cabinet is used, and the cost is low. However, because the skirting board is very close to the ground, the wooden material is easy to absorb water and tide, and the water vapor will rise along the skirting board to endanger the entire cabinet.
2, rail drawer
The guide rail is divided into two kinds of rails and three rails. When selecting the brightness of the exterior paint and plating, the gap and strength of the load wheel determine the flexibility and noise of the drawer opening and closing. The load-bearing wheel with uniform wear and rotation should be selected.
3, steel pumping
The steel cutting and cutting discs of the cutlery and fork are accurate, standardized, easy to clean, not afraid of pollution, and will not be deformed. They have an irreplaceable role in the maintenance and use of kitchen cabinet drawers. They have long been developed in Germany, the United States, Japan, etc. National kitchen cabinet companies are widely used. Therefore, when you have roughly observed the appearance of the kitchen cabinet, you should open each drawer and take a look. If you use steel pumping and knife and fork combination, the cost of the product is higher, the cabinet combination is more standardized, and vice versa. Drawers are less expensive.
4, handle
Handle materials are zinc alloy, copper, aluminum, stainless steel, plastic, logs, ceramics, etc. In order to match the various styles of furniture, the shape and color of the handle are varied and colorful. The handles of electroplating and electrostatic painting have wear-resisting and anti-corrosion effects. In addition to matching with the decoration style of the room, they should also be able to withstand large pulling forces. Generally, the handles should be able to withstand more than 6 kg of pulling force.
5, hinge
The main types of hinge-type hardware are door hinges, drawer guides and cabinet hinges. The door hinge material is copper and stainless steel. The standard area of ​​single-piece hinge is 10cm×3cm and 10cm×4cm, the diameter of the middle shaft is between 1.1cm and 1.3cm, and the wall thickness of the hinge is 2.5mm to 3mm. When the hinge is selected, it is easy to open without noise. It is preferable to include a ball bearing in the shaft of the page.
6, hinged cabinet door
The hinge is divided into two types: detachable type and non-detachable type. The cover position is divided into three types: large bend, medium bend and straight bend, and the middle bend is mainly used. In addition to the visual inspection and the smoothness of the hinge surface of the hand hinge, attention should be paid to the reset performance of the hinge spring. The hinge can be opened at 95 degrees, and the hinges are pressed hard by both sides to observe that the support spring piece is not deformed or broken, and is very strong. For quality qualified products.
Concerned about surprises
Tag: Hardware Products Hardware Accessories
Previous: Classification and role of coal slime dryer bearings Next: What testing instruments are required for hardware testing
Toughened Kitchen Splashback Glass
Glass kitchen splashbacks are ideal for messy areas so especially suited in a kitchen which is of course prone to food splashing. Easy to wipe clean these splashbacks will look as good in ten years as they did on day of installation. So in order to keep pretty, some people choose back painted Tempered Glass with one color, and now more and more choose choose design printed tempered glass too for kitchen splashbacks. Designer kitchen splashback that will make a stunning finishing touch to your kitchen. Easy to clean and fit, no grout required.
Back Painted Glass is any form of clear glass that is painted from the back side and viewed from the front side, or "first surface" side. Back painted glass is widely used for architectural spandrel glass, colored glass walls for interior glazing, colored glass back splashes, glass marker boards and dry erase boards, colored glass counter tops, shower walls, artistic glass, auto glass, marine glass, aero space glass, and more. Back painted glass is a modern alternative to other surfacing materials such as tiles and laminates in the world's decorative and architectural industries.
Some photos of back painted TOUGHENED GLASS and printed toughened glass for kitchen splashback show:
Kitchen Splashbak Glass, Toughened Splashback Glass, Back Painted Splashback Glass
Shanghai Lead Glass Co.,Ltd , https://www.leadglazing.com