NSK imported bearing oil film smooth handling skills

Source: China Bearing Network Time: 2018-04-14

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The smooth handling of oil film NSK bearing oil is very important; it can not be ignored; the specific analysis is as follows: the main cause of mechanical failure or early wear; more than half are related to smooth skill handling. Do a smooth handling; avoid NSK bearing, gear and other conflict movements Scuffing or sintering of parts; avoiding and reducing wear; reducing conflict resistance; avoiding the occurrence of equipment troubles; improving equipment production power, saving power; improving power useful utilization; adding economic benefits; is the primary task of smooth handling.
1. Smooth handling is a professional skill handling; full-time smooth skills should be set up for personnel; smooth management system should be formulated; smooth skill knowledge training should be carried out.
2. Under the premise of reasonable fuel tank capacity; adhere to the reasonable oil level of the fuel tank; often add smooth oil to the fuel tank; keep the oil in the fuel tank at a reasonable operating oil level; degas the oil; deposit the machine; And the oil temperature in the drop box is favorable.
3, punctuality, positioning and extraction of oil samples in operation; from the oil odor, color, viscosity change, water content, water separation function, pollutant types and content, anti-foam function, etc. to test and enter into the smooth point of the oil When the water volume exceeds 0.1%, the mechanical wear is sharply added, and the smooth condition beyond 0.5% will be very risky.
4. Analyze the record of each test; make a prediction for the unsatisfactory smooth condition; formulate an improvement or prevention method. It is safe and reliable for the system's oil level, oil quality, oil temperature, oil pressure control alarm and interlocking; Smooth episodes of the episode.
5. Avoid contamination of oil and handling oil:
(1) Oil product procurement, storage, storage, distribution and disposal of waste oil; there should be a strict handling system; according to different types; trademarks should be separated; there are significant easy to distinguish signs or marks; mark the name; trademark; Date, etc. Prohibit mixed storage; avoid misuse to form a mixed oil incident.
(2) During storage and storage; it is necessary to strictly ensure the sanitation and sealing of the container; to avoid the intrusion of dust, impurities and rain. It should be protected from light; cool and ventilated; warehouses with fire exits. Temporary open storage; The lid of the bucket adheres to the orientation of the skewed state; in order to prevent the intrusion of rainwater, the oil does not touch the metal with the copper oxide and lead to promote the oxidation reaction.
(3) The first item of smooth oil inspection and re-inspection: viscosity, viscosity index, water content, demulsibility, extreme pressure. The mechanical impurities in the hygiene requirement are within 0.01%; no moisture and sediment marks.
(4) The manhole cover on the top of the fuel tank should be tightly closed; do not open. The air filter has an accuracy of 100 mesh or more; watch the sorting on time; the drain valve in the lower part of the fuel tank is punctually discharged. Add smooth to the fuel tank. The oil is pumped by pipeline; and the filter with proper filtration precision is installed. The tank should be defensively arranged to deposit sludge; it is not allowed to wipe the inside and outside of the tank with fiber fabric.
(5) When replacing the blocked filter element; the oil in the filter cartridge should be drained; be careful to prevent dirt from entering the downstream pipe of the filter; form a severe irreparable secondary pollution; otherwise it will directly endanger the smoothness at the smooth point.
(6) Change the status according to the target of color, viscosity, moisture and pollution degree of the oil used; change the oil on time.

Recommend to friends comments close window

Bearing related knowledge

Oscillation analysis that can not be ignored in the bearing: the production process of the bearing ring inch tapered roller bearing HM218248/10
INA's bearings make up the common terminology and definition of coded rolling bearings (7)

This article links to http://
Please indicate the bearing network http://

Previous:Preparation in front of the "rolling bearing" device makes it smooth down the next wind: the importance of lubricating IKO bearings

Product Type

Machined Parts Cost,Hardware Machined Parts,Cnc Machining Workpiece,Brass Precision Machined Parts

Dongguan Jiufukai Hardware Products Co., Ltd , https://www.jfkspring.com