Shower Faucet Do not underestimate it, to know whether it is related to the output of the shower hot and cold water, in addition to the choice of good quality, in the installation must choose a suitable height, so as to better ensure the shower faucet Outflow of water. The following Xiao Bian will tell you about how many centimeters of the shower faucet are installed on the ground and what material is suitable for the faucet.
How many centimeters of shower faucet is installed on the ground
1. The height of the mixing valve and floor of the shower faucet must be determined in advance. Before installing the shower faucet, the first step is to determine the location of the installation. The distance between the mixing valve of the shower faucet and the ground is probably controlled between 90 and 100 centimeters. When you design the height, you should also fine-tune it according to the height of the family. However, the minimum height must not be less than 110 cm. Otherwise, the shower faucet's water cannot enter smoothly.
2. In general, after the shower faucet is installed, the silk head that must be set aside must be buried in the wall tile, and it can be covered with ceramic tiles, or it will affect the beauty of the shower faucet. Therefore, when laying pipelines, at this time you must consider clearly the reserved position. The height is generally required to be 15mm higher than the rough wall, so that you can just cover the silk after laying the tiles to ensure the wall The surface is beautiful and clean.
3. When installing a wall-mounted shower mixer, then you should pay attention to the distance between the hot and cold water pipes is about 15 cm. Before the installation, you need to do a good job of measuring, so that you can use the water pipe to soak the water pipes to prevent the water quality from causing damage to the water tap.
What is the material of the tap
1, iron faucet: This is relatively easy to rust, it is difficult to replace and disassemble, it is like a magnet. Generally, there are some small taps, so its surface is more difficult to handle, and its appearance is also rough. Large hot and cold faucets use less iron and are more difficult to process.
2. Copper faucet: The interior of copper is rough. You can look inside the faucet. You can see the brass color in the inconspicuous place. There is no problem. At present, the copper material is more suitable for faucets.
3, ceramic faucet: made of ceramic faucet, if compared with its, it will not rust, oxidation, wear and other advantages, the appearance of generosity, use this product it is more able to bring out the atmosphere of the entire space.
4, stainless steel faucet: Stainless steel faucet does not contain lead, acid and alkali, not easy to corrode, this product's hardness and toughness can be said to be more than two times higher than the copper faucet, but the hardness, toughness and cutting processing than copper Quality faucets are difficult and prices will be higher.
5. Zinc Alloy Faucet: The zinc alloy faucet is harmful to the human body. After the shell is impacted by water, it is very easy to corrode and break. You can observe the white surface of the faucet after it is ground. At present, it is generally made of sand-turning technology and machine die-casting, and the interior is smooth and flat.
Summary: Regarding how many centimeters of the shower faucet are installed on the ground, what material is suitable for the faucet and what is related to the material is introduced. When installing a shower faucet , it must be installed in a suitable location. This will be more convenient to use. The quality of the material can be determined according to your needs when you choose.
Bathroom accessory includes a range of Floor Drain , Robe Hook , Glass Holder , Soap Holder , Toilet Paper Holder, Toilet Brush Holder, tower bar, Towel Shelf and etc.
Bathroom Accessory,Rose Gold Bathroom Accessory,Bath Hardware Accessories Set,Luxury Bathroom Accessories
Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jmjenorsanitary.com