In recent years, the anti-theft effect has become better and better, and new products such as fingerprint locks and smart locks have emerged on the market. Do you have any understanding of the anti-theft door lock handle? Think about it, with the development of the anti-theft business, even the anti-theft door lock handle has an effect, how can you not sigh the beauty of life? Next, Xiaobian will take everyone Get up and look at the exciting content of the anti-theft door lock handle .
First, how to do if the anti-theft door lock handle is broken
1. First, the old door handle should be removed. The door handle of the anti-theft door is removed from the room, because the two screws of the fixed handle are inside, as long as the screw is removed.
2, the time is very simple to open, open the door, press the outside with four fingers, press the inside of the thumb (you can also help people press this outside), use a Screwdriver to remove the screw, pay attention! When you are about to unload, you should press it with a little force, because there is a spring inside, and it will pop up when you accidentally.
3. After the screw is removed, slowly take the handle down, then use the open pliers to open the snap ring on the handle and take out the handle. When doing this step, be sure to pay attention to safety, and don't worry.
4, put the new handle into the box, the card ring is stuck, this time is basically completed, the savings are loaded to go up. Put the handle in the original position.
Second, the anti-theft door lock handle can be used in the indoor door lock?
It is not very good. The lock on the security door is generally not convenient because it is designed for the anti-theft. The solid interior door generally requires the switch to be light and beautiful. Furthermore, the interior door is generally thin and the solid wood inside is not easy to install. Because the space inside the lock of the security door is large, the keyhole is to be opened. The general interior door is not suitable for the lock hole brought by the manufacturer.
Third, how to do the anti-theft door lock handle does not play
1. The material inside the lock cylinder is lubricated, which causes the lock core to twist when it is a little hairpin. It can scrape some pencil core powder and add the lock core. It can play a lubricating role and avoid adding substances such as grease to the lock core.
2. The security door is a bit tight. When you open the door, you can push the door to the inside and push the key to twist it. It may be easier.
3. The heaven and earth poles above and below the security door are lubricated. It is necessary to apply some lubricating oil to the heaven and earth poles.
4. The lock body itself is faulty and needs to be replaced with a lock body or a complete set of locks.
The above content is the introduction of the relevant content of the anti-theft door lock handle. I hope that readers will be able to see and hear, and you will benefit from the application in real life. Ok, today's introduction to the anti-theft door lock handle is here. Thanks to the readers for reading this article and for the support and love of Xiaobian. If you want to get more home decoration information, please continue to pay attention to the decoration. Home network.
More related wonderful reading:
Fingerprint anti-theft door lock introduction fingerprint security door lock related content
Home security door lock defect home security door lock sign
Advanced security door lock purchase skills advanced security door lock brand ranking
How to change the lock cylinder? What are the types of anti-theft door lock cylinders?
Casting the security door's advantage Casting the security door lock core introduction
Mini Measuring Tape,Mini Tape Measure,Small Tape Measure,Mini Retractable Tape Measure
SHANGQIU CHAOYUE MEASURING TOOLS CO., LTD , https://www.calibrateds.com