Why does the infrared waterproof camera appear flickering? As mentioned before, when the illumination intensity is lower than the threshold, the infrared lamp turns on. Closes above the threshold. Let us consider the situation when the illumination intensity is slightly lower than the threshold: the photosensitive element detects that the illumination intensity is slightly lower than the threshold, and controls the infrared lamp to turn on and emit light. After the infrared lamp emits light, the detected illumination increases (plus the anti- The returned infrared light exceeds the threshold and controls the infrared lamp to turn off - resulting in a decrease in the detected illumination, and once again controlling the infrared lamp to turn on. This does not stop, causing the image to flicker. This kind of situation is the principle reason, not to say it is normal, at least not the quality of the product.
The first is to extend the use time of IR waterproof camera IR lamps and affect the service life of the products.
The second is to turn on the infrared light for situations in which color images can still be produced, which will cause the image quality to drop at this time;
The third is the generation of infrared eye on the color image (infrared eye is also determined by the principle, people do not want to see the phenomenon). If the threshold is low, the infrared light may not turn on in time when additional lighting is needed.
Current ordinary infrared waterproof cameras generally use photosensitive elements to detect the illumination intensity of the environment in which they are located. According to the threshold determined in the design parameters, control signals are generated to enable the opening of the infrared lamps. The level of the threshold depends on the environment used, the preferences of the users, and the degree of importance of the designer considering various factors. The products of the manufacturers are different. Such as 20,10,5 Lux. When the threshold is high, the opening time is earlier. It is possible that the camera has not yet converted from color to black and white, and the infrared lamp is turned on. This will have three disadvantages.
So how to solve this problem?
The ambient illumination detected by the photosensitive element is slightly lower than the threshold, which is a problem. There are two situations:
First, at a certain time in the evening, for a short time, this problem arises. If we do not want to increase the cost, we should use general mindsets. Our idea is to explain the reasons to users and tolerate it.
Second, this issue must be resolved when the lighting intensity is stable.
1. Change the threshold.
In the same model, the thresholds are also different and there is a discrepancy. The problem may be solved by replacing a product.
Manufacturers provide products with different design thresholds for replacement.
Products with higher threshold design parameters are less likely to flicker.
2. Change the environment to change the intensity and angle of lighting.
A slight change in the installation angle of the infrared waterproof camera, moving up and down, the illuminance detected by the detector will have a lot of changes, it will leave the vicinity of the threshold, so as to solve the problem of flicker.
3, the use of high quality low illumination with backlight compensation anti-glare camera film, especially special IR lens;
In addition, when a person or other object near the infrared waterproof camera reflects infrared light, the detected illuminance changes repeatedly, causing flicker. For example, when doing demo tests, inspections, and the installation position of the camera is low, when an object covers the camera at close range.
This is not a problem. When the IR waterproof camera is in the normal installation position, this phenomenon is naturally gone. As a demonstration, just pay attention not to direct infrared light from a very close distance back to the photosensitive element.
The first is to extend the use time of IR waterproof camera IR lamps and affect the service life of the products.
The second is to turn on the infrared light for situations in which color images can still be produced, which will cause the image quality to drop at this time;
The third is the generation of infrared eye on the color image (infrared eye is also determined by the principle, people do not want to see the phenomenon). If the threshold is low, the infrared light may not turn on in time when additional lighting is needed.
Current ordinary infrared waterproof cameras generally use photosensitive elements to detect the illumination intensity of the environment in which they are located. According to the threshold determined in the design parameters, control signals are generated to enable the opening of the infrared lamps. The level of the threshold depends on the environment used, the preferences of the users, and the degree of importance of the designer considering various factors. The products of the manufacturers are different. Such as 20,10,5 Lux. When the threshold is high, the opening time is earlier. It is possible that the camera has not yet converted from color to black and white, and the infrared lamp is turned on. This will have three disadvantages.
So how to solve this problem?
The ambient illumination detected by the photosensitive element is slightly lower than the threshold, which is a problem. There are two situations:
First, at a certain time in the evening, for a short time, this problem arises. If we do not want to increase the cost, we should use general mindsets. Our idea is to explain the reasons to users and tolerate it.
Second, this issue must be resolved when the lighting intensity is stable.
1. Change the threshold.
In the same model, the thresholds are also different and there is a discrepancy. The problem may be solved by replacing a product.
Manufacturers provide products with different design thresholds for replacement.
Products with higher threshold design parameters are less likely to flicker.
2. Change the environment to change the intensity and angle of lighting.
A slight change in the installation angle of the infrared waterproof camera, moving up and down, the illuminance detected by the detector will have a lot of changes, it will leave the vicinity of the threshold, so as to solve the problem of flicker.
3, the use of high quality low illumination with backlight compensation anti-glare camera film, especially special IR lens;
In addition, when a person or other object near the infrared waterproof camera reflects infrared light, the detected illuminance changes repeatedly, causing flicker. For example, when doing demo tests, inspections, and the installation position of the camera is low, when an object covers the camera at close range.
This is not a problem. When the IR waterproof camera is in the normal installation position, this phenomenon is naturally gone. As a demonstration, just pay attention not to direct infrared light from a very close distance back to the photosensitive element.
A butterfly valve, is a valve that isolates or regulates the fluid flow. It's simple but reliable in Control Valves families, Butterfly Valve,Tripple Offset Butterfly Valve,Thread Butterfly Valve, Electric Actuated Butterfly Valve, Pneumatic Butterfly Valves.
Butterfly Valve,Tripple Offset Butterfly Valve,Thread Butterfly Valve, Electric Actuated Butterfly Valve, Pneumatic Butterfly Valves.
Zhejiang Philic Fluid Control Co.,LTD , https://www.philicflow.com