Lifting type infrared smart ball camera installation method

The installation of infrared smart ball camera is mainly divided into the type of ball machine. The type of infrared smart ball camera ball machine is mainly divided into two types: hoisting type and wall mounted type. Here, we will share the mounting method of hoisting type infrared smart ball here.

Ball machine installation

Installation conditions: The hoisting ball machine can be used for the hard ceiling structure of the indoor environment.

(1) The thickness of the ceiling should be sufficient to install the expansion screws.

(2) The ceiling can withstand at least 4 times the weight of the dome.

installation steps

1. The mounting hole of the ceiling base is a template, and the positioning hole position is drawn on the ceiling.

2. Remove the lifting bracket, punch the hole with the positioning hole mark, and insert the M8 expansion screw.

3. Pass the ball take-out wire through the center hole of the lifting bracket and pull it out from the notch on the side of the bracket base.

4. Assemble the ball shell and the lifting bracket.

5. Fix the assembled ball machine to the ceiling with flat elastic pads and nuts.

The above is about the installation method of the hoisting infrared intelligent camera, reminding everyone to wear protective gloves when installing the dome to avoid scratching the transparent cover, and the lifting bracket should not be used outdoors, because of the special environment needs, you must ensure The ball machine meets the waterproof requirements.

Utility Knife

Saw Electric Tool,Craftsman Utility Saw,Drywall Utility Saw,Table Saw General International

ZHOUSHAN CHUNLEI HACKSAW CO.,LTD , https://www.bailei.com