1. Carefully clean the surface of the coated object before painting the metal paint, remove the grease with a suitable cleaning agent and degreaser, and use an iron brush or other tools on the old wall to remove the old paint film and sand. The putty can be repaired with a putty to confirm that the wall surface is completely dry, clean, firm and flat, and the moisture content is less than 8%.
2. Mix the A component thoroughly before use, and prepare according to the ratio of A/B=100:15 (weight ratio). Stir and evenly mature for 20 minutes, brushing, spraying, etc.; coating interval 6-8h (25°) C).
3, the life of the tank: 6h (25 ° C, decreased with increasing temperature).
4. The construction temperature requirement is above 0 °C, below 40 °C, and above 3 °C above the dew point, the relative humidity should not exceed 85%.
5, thinner: metal fluorocarbon special thinner, cleaning tools can be used benzene solvents.
Shaped Tile Ceiling System,Aluminium Cladding,Aluminium Roof Cladding,Aluminium Cladding Systems
Foshan Nanhai Lianxing Deli Decoration Materials Co.,Ltd , https://www.fstuodeli.com