1. High temperature resistance, up to 450 °C metal rotor flowmeter, metal tube float flowmeter, power meter flowmeter.
2. It is suitable for the measurement of gas flow, liquid and steam flow rate with small diameter and low flow rate.
3. Magnetic coupling principle No leakage and high pressure.
4. It is not suitable to measure high viscosity medium due to certain viscosity.
5. When the flow rate exceeds 100m3/h water flow, the pressure loss is large.
6. Mostly used for process control instruments, the best accuracy is 1%, generally 1.5%, and the turndown ratio is 10:1.
7. Intrinsically safe explosion-proof and explosion-proof type are suitable for dangerous occasions.
8. The most suitable installation method is vertical installation with lower and upper.
9. There are various forms such as local pointer type, battery type, two-wire type, 220V AC power supply type and so on.
10. When measuring high temperature and low temperature (below -30 °C) medium, it is best to use jacket type.
11. It is not suitable to measure media with large changes in density.
12. It is not suitable to measure the flow of pulsating media (such as the metering pump outlet).
13. For the gas table, there is no temperature and pressure compensation, which needs to be considered separately.
14. For dense installation of multiple instruments or carbon steel process pipelines, when it is near the instrument, keep a distance of more than 100mm from the instrument to avoid magnetic interference.
15. For flow measurement of media containing a large amount of ferromagnetic particles, install a magnetic filter in front of the meter and periodically purge it.
16. If the instrument is used in the explosion-proof occasion, the round-shell M4 indicator should be used.
17. Metal tube float flowmeter requirements for straight pipe sections are not high, generally 250mm after the first 5D.
18. Flowmeter high and low alarm is generally open collector OC door mode, need to add relay for current amplification, also optional relay output type, contact capacity is 1A@30VDC or 0.25A@250VAC metal rotameter application is more and more widely.
Concerned about surprises
Tag: Metal Rotary Flowmeter Warm Pressure Compensation Flameproof Metering Pump OC
Previous: Machine vision system requirements for industrial cameras Next: Electrochemical deburring machine design research
All aluminum alloy material has strong plasticity and never rusts. Fluorocarbon baking powder is delicate, smooth, and long-lasting without fading. The product is intelligently matched with various smart devices, making it a minimalist, luxurious, and youthful fashion design style.
Advantages of aluminum doors:
Strong and durable: Aluminum alloy has high strength and hardness, can withstand the collision and wear in daily use, and has a long service life.
Corrosion resistance: Aluminum will naturally form an oxide film in the air. This oxide film can effectively prevent aluminum from further oxidation and corrosion, making it stable and not easily damaged in environments such as moisture, acid and alkali.
Good fire resistance: Aluminum alloy has good high temperature resistance, which can play a role in fire prevention to a certain extent and increase the safety of living.
Good sealing: Aluminum doors can be equipped with high-quality sealing strips to effectively improve the sealing performance of the door, and have significant sound insulation, heat insulation, and dustproof effects.
Various styles: Through different surface treatment processes and designs, a variety of colors and styles can be achieved to meet different decoration styles and personal preferences.
Environmental protection: Aluminum is a recyclable material and conforms to the concept of environmental protection.
room door ,Cast aluminum doors, secure metal doors
Foshan Nanhai Jinfancheng Metal Building Materials Products Co., Ltd. , https://www.landrandoor.com