Real wood floor construction to avoid mistaken laying

Statistics from relevant departments show that solid wood flooring has problems in actual use, over 50% is due to improper laying, and only 5% belongs to the floor itself. It can be seen that whether the laying process is reasonable or not is the most important factor that affects the effectiveness of the floor. Experts advise you that you should avoid the following mistakes.

　 1. The ground is uneven: The unevenness of the ground will cause some floors and keels to hang and it will sound when stepping on.

　 2. The keel has not been dried: the moisture content of the undried wood keel is usually around 25%, and the qualified wood flooring moisture content is generally 12%. The humidity difference is too short to make the wooden floor absorb moisture quickly, causing the floor to arch and paint. Face burst. It is the usual practice of the current decoration team to lay the floor first and then perform other construction on the floor. However, after the floor is laid, it often takes a month or more before it can be polished. During the period, there were no isolation measures for water vapor and chemicals on the floor and surrounding environment, which may cause the wooden floor to be deformed and cracked due to the rapid change in water content.

3, assembly too loose or too tight: wood flooring with the temperature and humidity changes in the environment, there will be expansion or contraction phenomenon. Therefore, when laying the floor, the tightness of the assembled wooden floor should be reasonably arranged according to the ambient temperature and humidity of the place of use. If it is too loose, there will be a large gap in the floor contraction. When it is too tight, the floor will arch when it expands.

4. Fixing method using wooden wedges and nails: The use of wooden wedges and iron nails in the construction will cause the nails to be insufficient due to the small contact surface between the wooden wedges and the nails. This can easily cause wooden keels. Loosen, and a noise will appear when treading on the floor.

Floor paint

Grill Grate

BBQ grate,stainless wire grill grate,grill grate,stainless steel bbq grate, iron bbq grate, etc. Suitable for indoor and outdoor barbecue, group activities, increase the fun of life.Multi-functional Grill Cooking Grid Grate: This wire mesh is mainly used for BBQ Grill Mat for outdoor cooking, it can also be used as a cooling and baking rack. Or you can develop other uses for it.

stainless wire grill grate,stainless steel bbq grate,iron bbq grate,bbq grill grate,bbq grill grates custom

Shenzhen Lanejoy Technology Co.,LTD , https://www.grill-mesh.com