Home>Bearing knowledge>Rolling bearing operation and storage methods |
Rolling bearing application and storage methods
Source: China Bearing Network Time: 2014-10-26
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Compared with the usual mechanical parts; the precision of the rolling bearing is high; therefore, it should be carefully handled accordingly.
1. Adhere to the hygiene of the bearing and its surroundings.
2, careful when using: If the application of thick branches and large leaves to the bearing with a fierce impact; will cause the bearing to appear scars, indentations, cracks and other injuries.
3. Use the right things.
4, pay attention to the anti-rust of the bearing. It should be prevented from being used in wet places; and not to sweat; should wear gloves.
5, the user should understand the bearing.
6. Formulate the operating standards for bearing operation:
1), the storage of bearings
2), the clearance of the bearing and its surroundings
3), the inspection of the dimensions and processing quality of the device parts
4), equipment operation
5), after the device view
6), open the work
7), protection protection (timed view)
8), the compensation of smoothing agent 2, the storage of bearings:
1. The bearing is coated with excessive anti-rust oil and packaged with anti-rust paper at the factory; only the package is not damaged; the quality of the bearing will be ensured.
2, but when stored for a long time; it is intended to be under the condition of temperature below 65% and temperature of about 20 degrees Celsius; it should be stored on a shelf 30cm above the ground. Others; the storage place should avoid direct sunlight or cold The wall touches.
Third, the bearing device: (focus on the front of the device)
1. Preparation of the bearing Because the bearing is disposed of by anti-rust and packaged; therefore, do not open the package before the device.
Others; the anti-rust oil coated on the bearing has an outstanding smooth function; the bearing for normal use or the bearing filled with smooth grease; can be used without cleaning. However, the bearing for exterior or the bearing for high-speed rotation; The cleaning oil will wash away the rust preventive oil; at this time the bearing is simply rusted; it is not allowed to be placed for a long time.
2, the inspection of the shaft and the outer casing to clear the bearing and the outer casing; recognize the burrs left by the scratches or machining. There must be no abrasive (SiC, Al2O3, etc.) sand or chips in the outer casing.
Secondly, check whether the scale, shape and processing quality of the shaft and the outer casing can match the drawing.
Recommend to friends comments close window
Bearing related knowledge |
Water smoothing, bearing damage and the protection method for repairing the outstanding function of bearing for a long time, "How to choose the type and variety of imported bearings" Detailed analysis of basic requirements for rolling bearing data Determining the wear of various rolling bearings |
This article links to http://
Please indicate the bearing network http://
Previous:General information and requirements for bearing outer packaging Next: The considerations for selecting sliding bearing grease
Metal Polishing Wax Paste Compounds
Metal Polishing Wax Paste Compounds,Blue Polishing Wax,White Polishing Paste Bar,Car Polishing Liquid,compound bar
NINGBO HENGHUA METAL SURFACE TREATMENT TECHNOLOGY CO.,LTD. , https://www.henghuametal.com