Screen printing machine maintenance and daily considerations
Â
    With the rapid development of screen printing machines , machine printing has gradually replaced the traditional backward hand printing. The screen printing machine is far superior to manual printing in terms of craftsmanship, speed and quality. However, the problems that occur in the use of the screen printing machine are also frequent. Now I will briefly introduce the maintenance and repair of the screen printing machine and the daily attention.
     Maintenance and maintenance of air compressor components : Do not allow excessive moisture and oil to enter the air pressure system to avoid cylinder failure and shorten cylinder life, ensure dry and clean compressed air, if necessary, add freeze-drying Check whether the oil volume in the converter is sufficient every day. If the pressure relief valve is not used for a long time, it should be pushed to the back end; when it stops working, the main power switch and compressed air source should be turned off; the speed control valve cylinder and various parts The shaft center should avoid magnetic loss; the components of the table slide and the precision height must be wiped clean and oiled frequently to prevent the precision from being affected by rust.
     Pay attention to the maintenance of the environment and the machine: 1 The environment of the printing workshop should be cleaned, especially the printing glass. It must be cleaned before work, and the cleaning machine should be cleaned regularly. 2 Voltage, grid inspection should be guaranteed within the voltage used. Avoid voltage is too high or too low; 3 PS version of the storage site should be placed in the cold air chamber or low temperature and dry place, especially to avoid the sink; 4 when using the PS version, do not bend, can not be stained or developed The liquid hand touches the layout.
The glue should be rubbed to the same thickness , and the work is often not taken seriously in daily production, resulting in partial damage to the plate.
Our products range in diameter from 0.5mm to 64mm, including 1X19, 7X7, 6X19, 7X19, 6X36, 8X19, 8X36, 19X7 and 35X7 with fiber core and steel core. In addition to these conventional wire ropes, we can also supply high-quality special wire ropes.
Most wire ropes work under harsh conditions and must be resistant to crushing, bending fatigue and wear. All of our wire ropes strive to achieve high performance levels to extend service life and thus increase the productivity of the end user. We therefore ensure that all materials are produced according to the wire rope industry standards. Each wire rope can be supplied with, for example, thimble eyes, spun ends and wedge sockets as well as many other assembly components. In addition, we also provide custom service, our team of engineers can manufacture the wire rope to the required specification according to your requirements. All materials are certified, traceable and ISO9001 compliant.
7X7 Wire Rope,Stainless Aircraft Cable,316 Stainless Steel Wire Rope,7X7 Stainless Steel Wire Rope
Jiangsu Hongze Stainless Steel Wire Rope Co., Ltd , https://www.hzrope.com