Small problems caused great trouble. Did you learn to pave wood floors?

Is home improvement gradually coming to an end? Install hardware, install the floor, please clean, are busy enough, but spring hot, small details you are concerned about it? In the spring decoration, pay attention to the shop floor to make a good expansion joint, be careful not to rocker!

Act quickly, protection starts here!

When paving a wooden floor, be sure to ask the installer to leave enough expansion joints so that when the summer comes, the floor will not lift. At the same time pay attention to keep the room air dry. In hot springs, the paint dries slowly after brushing. After the paint absorbs the moisture in the air, it will produce a layer of matte. Therefore, the drying agent is generally used to make the paint dry quickly. Similarly, latex paint is not easy to dry, it will not become moldy, it will need to open the air conditioner after construction, dehumidification, completely remove the moisture in the air

In general, there are three conditions for choosing a wood floor:

(1) Chromatic aberration Due to the differences in the areas where wood grows, shades on sunny slopes, and sapwood heartwoods, the floor boards reflect different shades of colors. Therefore, it is unrealistic to purchase floorings with the same color difference, except for wood-based panels. Therefore, as long as the color difference is basically the same when purchasing a wooden floor, it is the top grade.

(2) Strength In general, the greater the wood density, the greater its strength, the better the quality, and the higher the price of course. However, the strength of the floor can be selected depending on the site of use, such as the living room, restaurant, public event venues can choose to use high-intensity varieties, such as Yipei clone (commonly known as Brazilian teak), eucalyptus, etc., while the bedroom can choose the strength relative Lower species, such as ash, red oak, and shantung. Some seniors’ rooms can be chosen for their softness and warmth.

(3) In addition to the common thermal expansion and contraction common to objects, dry wood also has the property of swell and shrinkage. Therefore, the wood drying process in wood flooring production process is an extremely important process. The treatment is good or bad and the quality of the flooring great influence. At present, there are roughly three kinds of drying methods in China: low-temperature heat pump desiccant drying, steam high-temperature drying, and electric heating drying. Among them, the low-temperature heat pump has the best drying temperature, because it can evenly destroy the structure of the wood cell wall, making the wood dry shrinkage consistent, but the cycle is long and the cost is high. What is the appropriate value for dry moisture loss? This varies with the humidity of the area and the surrounding environment.

Some homeowners renovated their furniture and thought that it was a floor manufacturer's business. In any case, they had a good warranty card, so let them do it safely. However, problems occurred afterwards and they had to relocate the furnished furniture for floor trimming. Such time-consuming and labor-consuming behavior, why not be prepared for protection when you start? Then, start it!

Flooring Nature Flooring Del Floor Paint Interior Finishing Air Conditioning Furnishing Lacquer Finishing Living Room Dining Room Furniture Bedroom

Nylon Roller Brackets

Nylon Roller Brackets ,Keel Roller Bracket,Bow Roller Bracket,Anchor Roller Bracket

Jiaxing Gates Hardware Products Co.,Ltd , https://www.888gates.com

This entry was posted in on