Solid wood floor sounds how to do note that the installation process is the key

There are few ways to deal with floor noise. Even if the problem is alleviated after treatment, it cannot be completely cured. There is a way to completely eradicate the ground, re-tighten the dragons, and re-install the floor. It is really a waste of time and effort. No one wants to counterattack and reload. The flooring will not sound until the following processes and methods are emphasized before installing the ground dragon and the floor:


Scholarly aesthetic floor

1. Before installing the ground dragon, generally use a 12mm electric hammer drill to drill holes, then the wooden mallet must be used at least for 18-20mm square mussels. It is not easy to lay down the holes, and a few days, the wood shit is dried and shrunk. Just

2. The hardwood material of the depression is harder than that of the earthworm, and the hard shrinking force of the wood is small. The earthworm will not be able to pull up the wooden hammer and maintain its stability;

3. Some rooms have a floor level difference of a few centimeters. At this time, the master carpenter will put some knife-shaped cork or plywood under the ground dragon to ensure the level of the ground dragon. Don't forget to raise the floor height by 2.5. Above the centimeter between the earth dragons, short dragons must be fixed with each other to prevent the earth dragons from swinging around to ensure that the earth dragons are firm and firm;

4. When installing solid wood flooring for drilling, the aperture must be smaller than the floor nails, so that the floor can eat nails;

5. Set aside more than 1 cm of floor-to-wall contraction joints around the wall to avoid climate change or floor water content inconsistent with inflated arches. Most people know this. The above techniques seem to be small in detail, and the problem is often in small details that people do not pay attention to. In fact, these nodal skills are an important factor in ensuring the quality of the flooring, and they are also an experience point of reference for the relevant personnel and the users to be installed.

Precautions

Set aside more than 1 cm of floor-to-wall contraction joints around the wall to avoid climate change or floor water content inconsistent with inflated arches, as most people know. The above techniques seem to be small in detail, and the problem is often in small details that people do not pay attention to. In fact, these nodal skills are an important factor in ensuring the quality of the flooring, and they are also an experience point of reference for the relevant personnel and the users to be installed.

Flooring Considerations Nature Flooring Room

LED Step Light

staircase light; outdoor step lightings; step wall recessed lights

HSONG LIGHTING CO,. LTD , https://www.hsonglighting.com

This entry was posted in on