1, In the process of operation, avoid overloading operation of equipment caused by large particles of material and strong adhesive force, or device jamming or motor short-circuit caused by foreign trades in dust remover causing equipment or damage. It is recommended that users promptly check and install Overload protection device.
2 In the course of use, if the device leaks in the axial direction, the leakage of ash, etc., can be sturdy pressure material cover.
3 The machine has been filled with grease No. 00 grease before leaving the factory. The unloading valve has been filled with lithium-based grease. Within 6-10 months after use, the transmission and bearing components should be supplemented or replaced with grease. When the ambient temperature is high, wet or excessive dust in the air, the oil change time should be shortened appropriately.
4, star unloader in the transport and installation process, should remain stable, to avoid collisions, as well as causing the shell fracture deformation.
5, When the unloader installs the output shaft and the input shaft and other parts and accessories, it does not allow direct, hammering, to prevent damage.
6, This machine can be used in continuous working system. Forward rotation and reverse rotation can be used.
Star unloader common faults are:
1. The star unloader is suitable for continuous operation, allowing forward and reverse operation.
2. When the unloader output shaft and the input shaft and other parts are not allowed, direct hammering is not allowed to prevent damage.
3. During the transportation and installation process, the star unloader should be stable, avoid collisions, and even cause the shell to break and deform.
4. In the course of use, if there is a phenomenon such as air leakage or ash leakage along the axial direction of the equipment, it can be sturdy.
5. During the operation process, it is recommended that the user promptly check and install the device because the device is overloaded due to large particle size and strong adhesive force, or the device jamming or short-circuit caused by foreign trades in the dust collector may cause equipment damage. Overload protection device.
6. Before the delivery of the star unloader, the reducer has been filled with grease No. 00 grease, and the unloading valve has been filled with lithium grease. Within 6-10 months after use, the transmission and bearing components should be supplemented or Replace grease, if the ambient temperature is high, humidity or too much dust in the air, the oil change time should be shortened.
Botou Jinzhu Environmental Protection Equipment Co., Ltd. specializes in the design, manufacture and installation of bag dust collectors. It is a dust collector manufacturer in Hebei Province. If you want to purchase dust collector equipment, please contact us by email. At the same time, as a professional pulse bag filter production enterprise, we are willing to design dust collectors and answer dust collectors free of charge for users who need to buy and install dust collectors. Our contact information: Mobile 18731719567 Free national electricity
The magnetic drive design of the non dynamic seal makes the shaft end no longer need the dynamic seal, which ensures the leakage free operation of the pump. The solid and stable shaft support can ensure the accurate meshing of the gear when the pump is running at high speed, ensure the smooth operation of the pump, the high accuracy of metering and the long service life of the pump.
Magnetic drive gear pump in the design, manufacture and application of a large number of use of magnetic drive, pump and motor technology. It has the advantages of no pulsation, long life and no leakage. These advantages make our products widely used in chemical, medical, laboratory, water treatment, food and other industries.
Control System Of Gear Pump,Control Systems Of Gear Pump,Control System Of Gear Pumps
Suzhou Macxi Fluid Technology Co.,Ltd. , https://www.macxipump.com