GO Jiaju News Network learned that the Suzhou Quality Supervision Bureau recently conducted quality and safety risk monitoring on children's furniture (wooden children's furniture) products. A total of 45 batches of samples were collected, 9 batches were sampled by local manufacturers, 27 batches were sampled in the market, and 9 batches were purchased on the e-commerce platform. The inspection project is divided into two categories: supervision project and risk monitoring project, among which 35 batches are qualified in the supervision project, the pass rate is 77.8%, which is 16% higher than the quality and safety risk monitoring of children's furniture (wooden children's furniture) in 2015. The main problems are the warning sign items, structural safety items, and formaldehyde emission items. The total solvent residue of 9 batches of the 43 batches of risk monitoring project is greater than 10mg/m2, the highest value is 163mg/m2, and the total residue of benzene, toluene and xylene in the 6 batches is more than 3mg/m2, the highest value. It reached 88mg/m2.
Children's furniture refers to furniture products designed or intended for use by children between the ages of 3 and 14. Childhood is the most important stage of growth and development. Because children's self-protection awareness is weak, children's furniture must have high safety and environmental protection in design and production. There are more than 300 million children under the age of 16 in China, but the proportion of children's furniture in the furniture market is only about 5%. With the rapid development of the economy, people's living standards continue to improve, the housing conditions of ordinary people are gradually improved, and many children have their own independent rooms. Therefore, the various types of wood-based panels for children's furniture are the main materials for children's furniture, medium-density boards, particleboards, and large cores. Adhesives are used in the production of boards, plywood, laminated timber and laminated timber. Improper handling of the production process or the use of formaldehyde, paint, etc. in the gluing, edge-sealing, and finishing processes are likely to cause excessive formaldehyde emissions from furniture products. In the formaldehyde emission monitoring project, the release amount of formaldehyde in 44 batches of children's furniture was qualified, and the amount of formaldehyde released in one batch was unqualified, and its value was 2.5 mg/L.
Structural safety is an important indicator that distinguishes children's furniture from adult furniture. Children's furniture should not only consider its normal function, but also consider the children's play activities, so children's furniture should take into account the factors that may cause physical harm to children. Structural safety mainly includes: edges and tips, protrusions, holes and gaps, folding mechanisms, flaps, flaps, closed furniture, and other requirements. Among the 45 batches of children's furniture products, 4 batches were unqualified in structure, accounting for 8.9% of the total number of batches. Structural safety issues are mainly manifested in the edge and the tip, other items (drawer without anti-pull device).
Regarding the warning signs, 10 batches of warning signs were unqualified in the inspection of the supervision project, accounting for 22.2% of the total number of batches. From the statistical analysis of the product identification and intrinsic quality of the test, the integrity of the children's furniture with complete and accurate identification is significantly higher than that of children's furniture with irregular logos.
The reason for the failure of the warning sign is that the enterprise is not aware of the subdivision of the product. The subconsciously believes that the children's furniture is actually a miniature version of the adult furniture. It is not clear that the non-warning sign product is used by children of inapplicable age, causing misuse. risks of.
Through this risk monitoring, it is found that the quality level of children's furniture products produced by local enterprises is relatively high, and consumers are reminded to pay attention to the following matters when purchasing children's furniture:
1. It is recommended to buy all solid wood children's furniture, because the solid content of solid wood is relatively low. Buy a small amount of varnish finish, even children's furniture that is not painted, because this furniture is basically free of heavy metals and is relatively safe for children. For furniture with bright colors and thick paint film, there is a risk of excessive solvent residue, and purchase with caution.
2. When purchasing, you should carefully observe whether the edge, tip or protruding part that can be touched is rounded or chamfered. You can feel the hand or the hand cutting by touching the finger, avoiding the purchase of edges, tips and protrusions. Untreated product. Care should also be taken to observe the risk of pinching the child's fingers in the holes and gaps in the children's furniture, and to avoid buying products with unreasonable holes and gaps. When purchasing cabinet children's furniture, it should be noted that the stability is good enough, and a certain force can be applied to test its stability. Open the drawer and see if it has a pull-proof device. For furniture without pull-proof, there is a risk of injury to children, and purchase should be avoided as much as possible.
3. For children's furniture without warning signs, unbranded models, no age brackets, and no instructions for use, purchases should be avoided.
GO Jiaju News Information Network reports for you.
Stainless Steel Ball,Welded Pipe Ball,Stainless Steel Pipe Ball,Stainless Steel Tube Ball
Antong Valve Co.,Ltd , https://www.atvalveball.com