A good quality cabinet, his perfect side requires the cooperation of all aspects. Including design, production, transportation and installation. The installation of this link is the most important and last part of the display of the cabinet! So it's important! Today and everyone around the installation cabinet to talk about what should pay attention to the problem!
>>> Links: Kitchen Decoration Experience
What should customers pay attention to before installation?
This issue is rarely mentioned. In fact, the most common thing we do this time is to wait. Actually, there are some potential areas where we need to do a lot! Before installation, pay attention to the following aspects: Before the cabinet is installed, the owner needs to design a suitable solution according to his own situation, such as the size of the kitchen, layout, and the needs of the family. Many customers always think that the larger the better the design, the better, the better. In actual fact, the modern professional cabinet is not just a space built by a few boards, it should have its own connotation - a variety of household appliances, hardware and so on. Such as range hoods, customers should consider how much power; how to choose ovens and microwave ovens, whether it is practical; there are handles, baskets, hinges, tap selection and configuration, which should be placed? How should I place it and use it more conveniently and more suitable for your own habits? All these should be considered before installation to maximize the cost-effectiveness of the cabinets. Maybe you are not clear about these issues, but you can think of your cabinet designer to communicate and consult! It is important to understand these things before installation!
Once the cabinet plan is finalized, that is, after the cabinet's overall quotation comes out, what we need to do is to understand the contents of the quotation in detail, paying particular attention to the brand, model, and brand model of the plate. And ask to write to the contract! This has a legal effect! And asked the cabinet merchant package after-sales service details are also written inside the contract, to ensure that everyone's interests in the future to prepare the basis of the law!
The general kitchen needs to be reconstructed, that is, including several aspects: The reform opinions proposed by the professional cabinet company should include the changes of the structure, the alteration of the pipeline, the installation of the power supply, and the sticking of the wall tiles. It is important to remind everyone that especially when the circuit is being rebuilt, it is necessary to take the live line. Some unqualified workers may give you correct death! This is not worth the candle!
When the cabinets are installed, the cabinet manufacturers generally have protective measures for the floor and do not allow direct construction on the ground! The installation of the kitchen countertops is the most important thing for installing cabinets! Should pay attention to the following aspects: The installation of the countertop is the most important thing in the cabinet, quite with human skin! It is the place where the cabinets often contact! When installing, you need to pay attention to the following aspects:
(1) When installing the countertops, first check the cabinets to ensure that the cabinets are horizontal. After the countertops are installed, check the levelness of the countertops so that the countertops will not be deformed or cracked due to the unevenness of the countertops.
(2) The four corners of the gas burner hole (basin hole) are curved rounded corners with a diameter of not less than 10mm, and are smoothed with sandpaper, and cannot be serrated. This is done to avoid stress points at the opening, on the countertop Cracking occurs when the stress is uneven; the four corners of the gas burner opening are reinforced along the edges of the burner hole by the curved plate block, because the gas stove has a certain weight, and the pot must be put on the top, and only 12.7 mm thick The artificial stone can withstand limited pressure, so do reinforcement treatment to avoid deformation or cracking of the table when the pressure is too high. In the same way, the stainless steel basin must be reinforced on all four sides. Other openings must also be reinforced.
(3) The edge of the stove is covered with heat-insulating cotton and covered with aluminum foil paper so as to prevent the stove from being overheated when cooking and cooking, so that the top of the table is thermally expanded and the stove hole is cracked.
(4) The underside of the table shall have a backing plate to support the table top. The three bead boards or density boards with a width of 100 mm and a thickness of 16 mm or more can be used, and the glass glue is fixed on the back of the table front and back. Star pots and stoves add vertical plate. Of course, the entire board under the table will be better, so as not to affect the table due to damp deformation. This relatively high cost, the general small cabinet manufacturers will not be used!
(5) When the need for splicing, the mouth of the connection should be wiped clean with alcohol or water, so as to avoid too much dust at the joints, affecting the bonding effect, resulting in cracking of the joints.
(6) The table top must be 3-5mm expansion joints at the end of the wall, the table top should be more than 3 meters, and the expansion joints must not be less than 5mm.
(7) The countertop must be carefully polished and polished. The problem to be noted when polishing is: After replacing the sandpaper, all the traces of the previous sandpaper must be polished, and then a higher mesh number of sandpaper must be replaced. Until the artificial stone gloss polished out.
The door is quite the same as the cabinet's face, how the cabinet's effect is related to the door panel! When the door is installed, it must be protected! Avoid blemishes, bumps, scratches, and strokes. Owners and friends who have found the above problems in the installation process or before the installation of the door panel must immediately contact the manufacturer for disposal. Seriously, they must be replaced! The installation effect of the door panel requires horizontal and vertical! Only the door panel will not be deformed! If the friends of the owners find that the cabinet door is not the case, you can ask the cabinet manufacturer to adjust it until the result is satisfactory!
The hardware of the cabinet is the context of the cabinet, which belongs to a more pragmatic role! For example, the hinge of the cabinet is related to whether the opening of the door is smooth, and the support is related to the angle of opening the door on the cabinet, which directly affects the comfortable angle of using the cabinet. When the drawer pulls smoothly, whether it sounds directly affects everyone's mood! Cabinet hinges are currently used more often: the German brand domestic production of Hai Fu Le flag HAIFULE, the use of such hardware is generally medium and low cabinets! The high-end cabinets are marked with the BLUM imported from Austria. There are also several Heidis, Ferrari and Grasses! Hardware installation success criteria are as follows: support any angle can be free to stop, drawer and pull blue to pull smooth, silent! These can allow manufacturers to debug repeatedly until they are satisfied!
The number of appliances in the kitchen and how to place them have a great influence on the cabinet style! With regard to the kitchen, we should pay attention to the following aspects:
1. Make the refrigerator, oven, microwave oven, and dish-washing cupboards embedded. Place them in appropriate positions in the cabinet. Be careful to open and use them.
2. Don't clash with kitchen door opening and refrigerator door opening.
3. To reserve more jacks, it is best to have a socket for each kitchen appliance. All need to install leakage protection devices.
4. The location of the refrigerator should not be close to the stove, which often generates heat and is a source of pollution, affecting the temperature inside the refrigerator.
5. The refrigerator should not be too close to the vegetable sink to avoid leakage of the refrigerator due to spilled water.
6. The height of the range hood is based on the height of the user, and the distance between the range hood and the stove should not exceed 75cm.
7. Where the water quality is not good, consider installing a central clean water treatment system.
After debugging the above several links, I believe that your cabinet will appear to satisfy you and be proud of it! Some suggestions believe that there will be some help in installing cabinets!
Renovation Carpentry Knowledge Hardware Villa Design Range Hood Arrangement Microwave Oven Renovation Design Kitchen Doors Glass Bricks Drawer Cabinets Counters Glass Counter Doors Home Cabinets Stainless Steel Cabinets Cupboard Doors Cupboard Doors Doors Kitchen Wall Tiles Kitchen Cabinet Doors Floor Tiles Glass Doors Kitchen Glass Sliding Doors
The users of junior vests are children, the vest is made of high visibility material or colorful material, and high light reflective tape. It can make the the children high visibility and keep safety. Different from adults's vests, children's vests have more color, and usually have lots of fun logos on vests, not only children like them, adults like them, too. With children's vests, adults will have less worry about chilren's safety.
Junior Vest,Kids Safety Vest,Baby Safety Vest,Childrens Reflective Vest
Yongkang Oti Safety Products Industry Co., LTD , http://www.qbanppe.com