First, the only source of various stone diseases is the formation of substances from the outside and immersed in various materials inside the stone. All the stone materials can be infiltrated. The type and degree of the disease are different due to the different environment or the material of the stone itself. If the stone disease is generated, it will take a lot of trouble to cure it. The most serious problem is The replacement of the already installed stone, especially in the stone in an important position in the building, has a long-term impact on the aesthetics of the building decoration.
It is the most effective preventive measure for the stone to be treated before installation. Correct construction and correct selection of protective materials can provide long-term protection for the stone.
Second, the current domestic stone installation is also inseparable from the wet paste method (that is, using cement and other materials to paste the stone on the ground or wall), including part of the wall and most of the ground. If the stone is not treated or if the correct method and effective protective material are not selected, the stone disease often appears at the end of the decorative construction. The main reasons are:
1. Because of the moisture sticking, the various materials harmful to the stone (such as iron, manganese and silicate components) which penetrate into the stone inside through the back of the stone are combined with the material of the stone itself to cause water spots and alkali return. , yellowing and other pollution phenomena.
2. Some water-based pollutants in the construction were immersed in the interior of the stone by Shicai.
These contaminants are difficult to clean and costly. Therefore, the protection of the stone and the protection is one of the essential procedures for stone construction.
After several years of stone installation, the frontal protection will be gradually weakened by natural factors. If the stone is installed outdoors, it must be protected twice in the future to fully protect the decorative value of the stone (especially The stone of the rough surface should pay more attention to the role of protection). The so-called "stone maintenance" is a professional cleaning company through special mechanical equipment, maintenance chemicals, special technology, dust removal, pre-mirror treatment, crystal hard treatment, waxing, polishing, etc., to make the stone reproduce the brilliance, bright still Stone is beautiful as the "skin" of human beings, and needs to be carefully maintained. The beautiful face will not be lost with the change of years. Because of the micropores naturally present in the stone, the smaller the pores, the stronger the surface adsorption effect of the capillary action. Many of the diseases of stone are "sick from the hole."
The traditional installation and use of decorative stone neglects cleaning, protection, maintenance and other issues. It is generally believed that the stone is strong, durable, hard and wear resistant. In fact, the bright effect of decorative stone is what people are pursuing. If it is polluted or worn out, the bright effect will disappear. In the later period, it will cost money and affect the use. Some pollution is still irreversible. The decorative stone is not protected before installation. Maintenance and remedial measures should be taken to make the appearance as soon as possible. Protection and protection can keep the stone as bright as possible for a long time.
Third, excellent protective materials should have the following properties: waterproof, anti-fouling, anti-sticking, non-toxic, odorless, environmentally and health-friendly and easy to use, wide application range, maintain the permeability of stone, do not affect the appearance of stone, etc. . However, any brand of protective materials is not omnipotent. Different protective materials should be selected according to different stone needs. Even the same kind of stone will choose more than two kinds of protective materials for protection.
For more permeable stone or precious varieties, more stringent protection procedures are needed. In this case, not only the protective materials should be selected, but also the correct construction methods, methods and opinions of professionals should be selected to ensure the construction savings and high efficiency.
Picture Light
LEDER technology`s picture light provides appropriate lighting is going to add shine to your beloved elements especially for a fine piece of artwork on your wall. It not only highlights your favorite pieces of wall paintings but also creates an inviting atmosphere around the surroundings. 560lm appropriate brightness avoids the light being too dim or overwhelming.
Now give it the lighting it deserves with this frame-mounted picture light! Made from metal, this sleek fixture features a built-in 2 W LED system, shining 77 lumens of 3000k soft white light on your painting, portrait, or poster with the flick of a switch. Rounding out the design, a simple bracket affixes to your frame for effortless installation.
Features:
• Simple and modern design
• Dimming brightness
• Adjustable light intensity
• Energy saving save electricity
• Color temperature :3000k-6000K
• Adjustable angle: Allows for light distribution in the direction that best suits your space.
• Type of protection: IP20 /IP65 (Some models)
• Warranty:3 - 5 years
Thanks to its understated silhouette and neutral solid finish, this picture light is versatile enough to blend with a variety of color palettes and aesthetics, and let you focus on your art.
We have rich production experience in lighting.Except Decoration Lighting , we also offered other product in Indoor Lighting .Such as :
LED Panel Light , Track Light , Linear Light ,Wall Light , LED Strip Light , LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .
Photo Clip String Lights,Photo String Lights,Led Picture Light,Lighting Images
JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.ledsteplight.com