Dear, do you know Weihai PE water tank, plastic water tank, plastic storage tank, and chemical tank water supply pipe installation welding technology reference? In fact, Weihai PE water tank, plastic water tank, plastic storage tank, and medicine tank water supply pipe installation have 5 steps.
Dear, do you know Weihai PE water tank, plastic water tank, plastic storage tank, and chemical tank water supply pipe installation welding technology reference? In fact, Weihai PE water tank, plastic water tank, plastic storage tank, and medicine tank water supply pipe installation have 5 steps.
Put the pipe into the rack, adjust the concentricity of the two pipe ports, and pay attention to the end point of the frame forward, and keep the pipe in place when the docking is maintained.
2. Lock the frame and make the two ends of the pipe flat. When the two-port material is wound, it is better to surround the pipe with two rings. Keep the port free of dust. Wipe clean with alcohol.
3, put the heating plate for pressure preheating, when the port of the two pipes is 2mm, the pressure should be relieved.
4. After the corresponding time is warmed up, take out the heating plate at the fastest speed and dock with the corresponding pressure.
5. Do not touch the frame and tubing with any power when the pressure is cooled. Second, pipe and pipe welding methods: Under normal circumstances, the pipe is always thicker than the pipe. When the pressure is warming up, only use the appropriate time to heat the pipe port, and then preheat and warm the two ports when they are used. When welding, the thick wall of the pipe is used as the standard, and the corresponding pressure is used for docking. Third, the welding machine temperature adjustment: Under normal circumstances, the weather temperature is adjusted, the temperature of the general welding is about the same as the temperature of the pipe production.
The following table is for reference:
Weather temperature welding machine temperature
10oC--20oC 220oC--230oC
21oC--30oC 180oC--210oC
Article Source:
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Sodium Carboxymethyl Cellulose is a carboxymethylated derivative of cellulose, also known as cellulose gum, which is the main ionic cellulose gum. First made in 1918 and patented in 1921, it has since been commercialized in Europe. It was only for crude products and used as a gel and binder. In 1936 and 1941, the study of industrial applications was quite active and published several instructive patents. During world war ii, Germany will be used to synthesize detergent. Industrial production began in Germany in the 1930s with IG Farbenindustrie AG. Since then, the production process, production efficiency and product quality gradually improved. In 1947, the FDA confirmed that it was not toxic to the body, allowing it to be used as an additive in the food processing industry. Because of its many special properties, such as thickening, bonding, film forming, water holding, emulsification, suspension, etc., are widely used. In recent years, different qualities have been used in different fields of industry and people's lives.
Sodium Carboxymethyl Cellulose
Carboxymethylcellulose Sodium,Carboxymethyl Cellulose Sodium,Carboxymethyl Cellulose Sodium Cmc,Carboxymethyl Cellulose Sodium Nacmc
Hebei pancan trading co. LTD , https://www.hbpancanshangmao.com