As a bathroom cabinet product often used in modern bathroom space, its material is generally rich; bathroom cabinets can be divided into a variety of materials, and now stainless steel bathroom cabinets have gradually become the darling. But after the stainless steel bathroom cabinet was bought and used, the problem will appear. Because the stainless steel material in the bathroom, after steaming, slowly becomes unclear. There is a mist on the stainless steel bathroom cabinet. How can I wipe it off? How to deal with this situation?
In fact, don't worry, use toothpaste to solve this problem. Squeeze a little toothpaste on the surface of stainless steel, gently wipe it with a soft cloth until it is wiped clean. Finally, use fresh orange peel on the surface of the product, because the orange peel is on the skin. The fruit acid can maintain the stainless steel, so that the stainless steel can be changed back to a bright new look; of course, it is recommended that consumers should develop good habits during use. Once the surface has water, it is best to wipe the surface water. clean.
Concerned about surprises
Label: What should I do if there is a "spotted spot" in a stainless steel bathroom cabinet?
Previous: Buying latex paints also need to pay attention to product gaps Next: Four details to pay attention to open kitchen
1.cylindrical milling cutter
Used for processing flat surfaces on horizontal milling machines. Cutter teeth are distributed on the circumference of the milling cutter, and are divided into straight teeth and spiral teeth according to tooth shape. According to the number of teeth and coarse teeth and two kinds of fine teeth. The helical tooth rough tooth milling cutter has fewer teeth, high tooth strength and large chip space, which is suitable for rough machining. Fine-tooth milling cutters are suitable for finishing.
2. face milling cutter
Also known as disc milling cutter, used for vertical milling machine, end milling machine or gantry milling machine processing plane, end face and circumference have cutter teeth, also have coarse teeth and fine teeth. The structure has three kinds: integral type, insert type and transferable type.
3. End milling cutter
Used for processing grooves and step surface, knife teeth in the circumference and end face, can not work along the axial feed. When the end mill has end teeth through the center, axial feed can be provided.
4. Three-side edge milling cutter
Used for processing all kinds of grooves and steps, its two sides and circumference are provided with cutter teeth.
5. Angle milling cutter
For milling grooves at a certain Angle, there are two kinds of single Angle and double Angle milling cutters.
6.Saw Blade milling cutter
Used for machining deep grooves and cutting off workpieces, there are more cutter teeth on the circumference. In order to reduce the friction during milling, there are 15 '~1° auxiliary Angle on both sides of the cutter teeth. In addition, there are keyway milling cutters, dovetail slot milling cutters, T - shaped slot milling cutters and various forms of milling cutters.
End Mill,Roughing End Mill,Carbide Square Drill Bit,Coating Machine Tools
Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com