Which reason is easy to damage the dust bag

Filter the wind speed. The high filter air speed of the bag filter is the main reason for the damage of the dust bag. In recent years, some unit blind targets have reduced equipment costs and added profits. When the bag filter was designed, the filter speed was increased. There was no obvious response from users within a short time, but the service life of the filter bag was greatly shortened.
Dust Medium: The choice of material for the dust bag is determined by the nature of the dust in the dust, and it must be considered whether the dust can contain acids, alkalis, or substances that are more corrosive. According to the nature of the dust, the proper filter material can be used, so that the filter bag can normally adsorb dust without affecting its service life.
Application temperature: Accurate selection of dust bag that responds to the dust temperature is the hub of the filter bag. Assuming that the temperature is too high, the dust bag selected to exceed the normal operating temperature, filter bag will shorten the service life, serious will be destroyed within a short time. Therefore, when the filter bag is selected, it must be determined that the inlet temperature of the dust collector is good, and the dust bag in response is selected.
Product quality: The product quality of the dust bag is mainly special. In recent years, some small manufacturers use small sewing machines as processing equipment, and use inferior quality lines as raw materials for processing. Dust filter bag in the use of time is not long to open the line, crack, loss of bottom and other scenes. Although the bag size is slightly smaller, it can also be used. However, after adsorbing dust with a larger specific gravity, the use of a bag for a certain period of time will cause the appearance of lost bags.
Botou Jinzhu Environmental Protection Equipment Co., Ltd. specializes in producing pulsed bag dust collectors, cyclone dust collectors, wet desulfurization dust collectors, electrostatic precipitators and dust collector bags, dust collector skeletons, electromagnetic pulse valves, pulse control instruments, air cylinders, cloth bags hanging , Venturi tube, screw conveyor, unloader, bucket elevator and other dust collector accessories. Can also be based on customer requirements for non-standard design transformation.

Elevator Speed Governor

Elevator Speed Governor,Over Speed Governor,Over Speed Governor In Lift,elevator overspeed governor

MAURER TECHNOLOGIES CO., LTD. , https://www.maurer-elevator.com

This entry was posted in on