The kitchens of every household are inseparable from the cabinets, and the cabinets are the necessary worktables for cooking food. Today, some families will choose custom cabinets, but the price of custom cabinets is not cheap, and many working-class families will choose home-made cabinets. For example, ceramic tile cabinets are very popular among owners. How do you make ceramic tile cabinets? For everyone to bring 2018 tile cabinet production process , I hope to be helpful to everyone.
First, what is a tile cabinet
Tiled cabinets are a method of production in cabinets. Its raw materials are sand, cement, ceramic tiles, red bricks, etc. to build cabinets, then reinforced concrete is used to build the countertops, and finally the finished product countertops, cabinet doors, and hangers are added. Cabinets, hardware, etc. This is called a tiled cabinet.
Second, the size of ceramic tile cabinets
1, base: generally about 10-15CM.
2, cabinet cabinet height (adjust the feet + cabinet + table.): Cabinets cabinets are generally about 80cm in height. The height of the adjustment foot is generally 10cm, and the height of the table is 4cm. The cabinet height is generally about 65cm-71.5cm.
3, the height of the cabinet: the height of the cabinet is generally 65cm, 78cm, 91cm three sizes, this is determined by the height of the kitchen ceiling, if the kitchen ceiling is relatively high, you can consider 91cm cabinet.
4. The depth of the cabinet: The depth of cabinet cabinet is about 60.5cm. Its depth is generally 56cm for cabinets and 32cm for cabinets.
Third, the production of ceramic tile cabinet materials
1. Laminate and Vertical Plate: All Ceramic Tiles 800*800CM
2. Frame: Three times of electroplating aluminum alloy frame, anti-rust aluminum alloy, 1.2mm thick aluminum profile at the hinge, 1.0MM thickness in other places
3, cabinet door: crystal plate 5MM tempered glass
4, table: quartz stone thickness is not less than 1.5CM, plus or minus 0.5MM,
5, plastic: dry hanging structural adhesive.
Fourth, 2018 tile cabinet production process
1, first take a look at the ground level, make sure to use a tile to make a floor, about 105CM in height;
2. Start to lay the first tile on the bottom floor and install the frame; after adjustment, start paving the second tile; the order is to install the outer side board first; then install the inner side board; then install the side board and back board.
3. Laminate the board, play the structure glue and then install the second board. The board is preferably in the form of PVC edge banding. The edge band is recommended to create the slope structure, which will be more convenient for the owner to do sanitation;
4, the installation of tempered glass veneer, the panel has a variety of colors, you can choose according to their own preferences; laminate is best to use double-layer tile structure, do so can increase the degree of firmness; then install the first and second top plate according to the program .
5. Install the countertop; it is recommended to add a tile finish to the skirting board and it will be more beautiful; the baseboard will be embedded in 4 centimeters; the final installation of the door will be completed.
Conclusion of the article: The above introduced the relevant knowledge of 2018 tile cabinet making process . I believe we have a certain understanding of the production of ceramic tile cabinets, if you need to refer to this article, I hope this article will help you.
2018 ceramic tile cabinet making process
Angle Steel Tower,Steel Angle Iron Angle,Steel Angle Bars,Galvanized Angle Steel
Zhonglian Yongsheng Special Steel Co.,Ltd , https://www.zlysssteel.com