1. The instrument needs to be operated by someone.
2. Before use, you must check the position of the oil tank and whether the tubing is loose.
3, put the test block, turn the hand wheel, adjust the height of the screw, adjustable to the sample from the upper plate 1-2mm.
4. Turn on the power and start the motor.
5. Close the return valve and control the delivery valve. When the strength level is small C30, take the loading speed of 0.3-0.5Mpa/s. When the strength level is greater than or equal to C30, take the loading speed of 0.5-0.8Mpa/s. When the specimen begins to rapidly deform near failure, stop adjusting the throttle of the test engine until the specimen is broken.
6. After the specimen is broken, open the oil return valve to make the piston fall back. At this time, the reading indicated by the pointer is the destruction load of the specimen, and record it.
7. Clean up the test pieces for the next test.
8. After the test is completed, press the stop key to turn off the motor and turn off the power.
Building industrial brick pressure tester operation steps? YM technology to answer your questions
Square Pipe Plasma Cutting Machine mainly fit for square pipe continuous cutting or be desigened shape on pipe corner..
1. As multifunction Cutting Machine use together with Plasma Cutting Table. 2. Accept OEM for any pipe cutting diameter and working length. 3. Be used in a widely range..fit for both cut round pipe and square pipe.. 4. Accept any materials cutting: Iron plate, Stainless steel plate,Titanium plate,Galvanized sheet, Aluminum plate High speed steel, etc
Square Pipe Plasma Cutting Machine
Plasma Cutting Machines,Plasma Pipe Cutting Machine,Pipe Plasma Cutting Machine,Cnc Plasma Metal Cutting Machine
Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnformingmachine.com