The main points of the balcony solar water heater installation

Solar water heaters can be purchased in accordance with the requirements of home renovation hanging style and balcony style, the installation of these two kinds of water heaters are different, then the installation of balcony solar water heaters need to pay attention to it? Let's learn about it with Xiaobian.

Balcony Solar Water Heater Installation Notes:

1. The level, circulation nozzle itself has a slope, but it should still be high.

2. When hanging, hang the rope up and down and hang it from the outside wall.

3. Aluminum frame, plastic head should be lightly placed.

4. Add antifreeze

5. The bottom of the tank is 30mm above the collector.

Solar water heater installation steps are as follows:

1.U-shaped positioning, from inside to outside through the eyes.

2. Assemble the bracket, surely size it and then mount it.

3. Position the brackets, and move the two heads left and right to make necessary adjustments. Tighten the three set screws.

4. The trim strip is first positioned with the screw, then with the middle pressure plate and finally with the frame.

STAINLESS STEEL PRODUCTS

Stainless steel is a corrosion resistant steel alloy with a minimum of 10% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present. The chromium creates an invisible passive film of chromium oxide that will not let oxygen attack the surface and prevents rusting of the iron base.

Yuhong Group is a stainless steel manufactory of more than 20 grades of Stainless Steel.

Stainless Steel Fitting

Stainless Steel Fitting,Stainless Steel Pipe Fitting,Stainless Steel Tube Fitting

YUHONG GROUP CO.,LIMITED , https://www.jessro-pipefittings.com

This entry was posted in on