Home improvement DIY six steps to make decorative frame transformed jewelry wall (Figure)

Home improvement DIY six steps to make decorative frame transformed jewelry wall (Figure)

Change the decorative paintings that have been used for a long time to the most desirable ones and give these beautiful fairies their own place.

Six steps to make a decorative frame into a jewelry wall
Six steps to make a decorative frame into a jewelry wall
Six steps to make a decorative frame into a jewelry wall
Six steps to make a decorative frame into a jewelry wall
In the first step, the back of the picture frame is compared with the cotton cloth, and then the shape of the back plate is painted on the cotton cloth with a black ink pen (or painting powder).
Six steps to make a decorative frame into a jewelry wall
Six steps to make a decorative frame into a jewelry wall
The second step is to cut the fabric and use it according to the size just drawn.
Six steps to make a decorative frame into a jewelry wall
Six steps to make a decorative frame into a jewelry wall
In the third step, the thin cotton wool is cut into the same size as the cotton, and then the thin cotton wool is cut off by about 1 cm on the basis of this size (that is, the size of the thin cotton wool is smaller than that of the cotton cloth).
Six steps to make a decorative frame into a jewelry wall
Six steps to make a decorative frame into a jewelry wall
In the fourth step, after the cotton and cotton cloths are cut, the cotton wool is placed in the middle of the two cotton cloths, and then the four sides of the two cotton cloths are sewn.
Six steps to make a decorative frame into a jewelry wall
Six steps to make a decorative frame into a jewelry wall
In the fifth step, paint the frame into its favorite color with spray paint (be sure to wait for the paint to dry before proceeding to the next step).
Six steps to make a decorative frame into a jewelry wall
Six steps to make a decorative frame into a jewelry wall

In the sixth step, insert the cloth just made into the picture frame, and then put the back plate of the picture frame on it. (The original glass plate of the picture frame can be selected and used. If you want to make the cloth more closely, you can draw it on After the frame back plate, use a wide transparent tape to stick a circle on the back of the picture frame to seal the back plate.
Tips Cotton: If the batting is too thin, it can be two layers when it is made. The cloth can be made thicker to make the needles and pins more convenient. It should not be too thick and moderate.
Frame: If you want to make it a new frame, you will paint it. If you polish it properly with sandpaper, you will feel nostalgic.
Picture frame backplane: Some picture frame backplanes are relatively soft and some are relatively hard. If you think that the backplane is relatively hard, you can replace it with a thin plastic foam plate.

Decorative paint glass decoration painter install glass door

T5 UV Lamp

Ultraviolet Germicidal Bulb,Portable Uv Lamp,Uv Light Bulbs For Humans,Nb Uvb Lamp

Foshan Kingrate Optoelectronic Technology Co., Ltd. , https://www.kingrateuv.com

This entry was posted in on