The 3rd Executive Director (Enlarged) Meeting of the 6th China Machine Tool Industry Association was held in Wuhan on January 20, 2010. The main contents of the meeting include: 1 Inviting the Ministry of Industry and Information Technology, the National Development and Reform Commission and other leaders for the development situation report; 2. The executive vice president to adjust the structure and promote the industrial upgrading work report; 3. The executive vice president to make the "Twelfth Five-Year" development plan Outline preparation report; 4. Respond to financial crisis and structural adjustment experience exchange. The morning meeting was chaired by Zhang Zhigang, the rotating chairman. More than 160 people attended and attended the meeting. Huang Zhaolun, chairman of the board of directors, gave a welcome speech. Jia Yaowu, member of the Standing Committee of Wuhan Municipal Committee, delivered a warm speech on behalf of the Wuhan Municipal Party Committee and Municipal Government. Director Zhang Xiangmu of the Equipment Industry Department of the Ministry of Industry and Information Technology reported on the status quo and the situation facing the equipment industry. He said that the scale of China's equipment manufacturing industry has reached 2 trillion US dollars in 2008, more than Japan and Germany, and similar to the United States, is a world equipment manufacturing power. From the overall level, there are some innovations that provide important equipment for the country's key projects. However, it is in the middle and low-end products, and the high-end products are in a state of failure. When talking about the "Twelfth Five-Year Plan", he said that the "Twelfth Five-Year Plan" is a crucial period for China to fully realize a well-off society. The plan should focus on structural adjustment, industrial upgrading, development speed and quality and efficiency, and foster new industries. It guides the development of the world, strengthens technological transformation, and promotes the construction of information industrialization. It is necessary to support the formation of a number of large enterprises with international influence, promote the transformation of Chinese manufacturing to China, and enhance the voice in the formulation of international game rules.
The Director of the Department of Economics and Technology of the National Development and Reform Commission, Li Ye, said that I would like to congratulate the conference and congratulate the state on the support of the equipment manufacturing industry. In the second form, I should pay attention to machine tools. , support, and fulfillment of responsibility. In his speech, he emphasized that the importance of the machine tool industry and the support of leaders at all levels in the country are known. They must pay attention to quality and service. Clean, new energy sources such as nuclear power, wind power, photovoltaic power generation and hydropower will rapidly Great development is an important implementation measure for the country to commit to the world's emission reduction strategy. The military industry also needs a large number of high-end machine tools. The machine tool industry must seize the opportunity to build a good service for the country and to make its own development.
Vice President Chen Dongqi of the Macroeconomic Research Institute of the National Development and Reform Commission reported on the world's macroeconomic trends. He said that the characteristics of macroeconomic development this year and beyond? What is the climate? How is the global economy going? Pay attention to the second economic crisis. The Chinese economy has recovered, and the United States and Europe have improved. It does not mean that the world economy has recovered. But I think that 2009 is a difficult year. 2010 is the year of development and will obviously recover. We must see that resource economies such as Australia, Brazil, and Russia are improving. Although there are negative reports in the Middle East, as long as the oil price is around 70 US dollars, the oil-producing countries' economy is very good. India has been chasing China and the economic development is very good. The US economy has also begun to recover, companies have lived up, cars, new energy, innovation, imports and exports have increased, and wealth income has increased. The price of each stock rose, the futures of the capital market were active, and industrial production and the overall economy improved. Recently, US real estate will rise. The US unemployment rate did not increase in October last year and maintained or slightly decreased. It is expected that the United States will have a 3% economic growth rate. Europe, Germany, France, the economy improved. Real estate in the UK began to grow last year. Industrial production is growing recently. Japan was still not good last September, but exports, especially exports to China, grew. Major economic indicators are improving. I have led 10 macroeconomic research experts to the United States to investigate, and the United States has invested two hundred and seven hundred million dollars to save the market. Due to fear of causing inflation, the bailout funds will be withdrawn in 2010. World financial recovery is faster than expected. Australia, Vietnam, Norway, and China have all raised interest rates and adjusted their expectations. Policy tightening, economic growth, and inflationary pressures. China's economic trend is still lower in the second quarter of 2009, and will rebound in the third quarter. In 2010, the situation will be good, government investment will not be reduced, and large projects will not stop, private investment will increase, new energy, transportation, medical care, information They are all developing rapidly. The current market is: production service, service information, information for the whole people or the whole process, people can provide services for American companies in China. We must make good use of this rising cycle and lay a good foundation. We will never suffer losses. Under normal circumstances, this round of rising cycle is 3 years, and the operation control may be extended to 5 years. Exports will increase substantially in 2010, and opportunities should be seized. The state will also increase investment in home appliances to the countryside. Last year's fiscal revenue increased and residents' income increased. After this year, the increase of 20% in the Pearl and Yangtze River Delta regions may not attract workers. This year I am not worried about not growing, and I am worried that I will not grow too fast. This year's slogan should be steady growth, not last year's growth. In 2010, the stock market will have great development, and the country needs capital market development. There are 30 trillion resident savings in our country, and we must try to use the money well. To make good use of the capital market, it is an excellent creation of human development. To see the excellent opportunities brought by the financial market, don't just bury yourself in production, and make money without making production! China will not experience high inflation, as long as government policies do not deviate. China's current production capacity in the field of automotive appliances and other areas is about 70%, supply will never be tense, tension is a sales strategy, not in short supply. The policy direction is to tighten conditions and focus on tax adjustment. In the first half of the year, financing costs were lower, and the latter half of the year was higher, but all adjustments were fine-tuned and would not be ups and downs. Ten years after China's accession to the WTO, there are more export frictions than in the previous decade. Enterprises should avoid export trade frictions as much as possible. If Chinese manufacturing wants to create a transformation to China, I am afraid that some of it needs to be jointly created by China and the West. The "Twelfth Five-Year Plan" is a period of major strategic opportunities and must be sensitive. Urbanization will bring huge demand, and we must move towards post-industrialization, and competitive pressure will increase the competitiveness of enterprises. In terms of quantity, China's many fields are the world's number one, and we must improve quality and service in the future. In the future, the world military products market will be popularized and the trend of globalization will be obvious. The competent industries and enterprises will enter the world military products market.
The afternoon meeting was presided over by the rotating director, Long Xingyuan, and the executive vice president Wang Liming made a description of the “12th Five-Year Plan†for the development of the industry. (The executive vice chairman of Wu Bolin intervened, requiring the standing directors to actively attach importance to and participate in the planning and formulation work. Planning and development is conducive to the development of the machine tool industry and the country's support for the industry.) He introduced the development plan of the “12th Five-Year Plan†of the machine tool industry in four parts. 1. Formulation of the “Twelfth Five-Year Planâ€; Guiding ideology; 3. Description of the planning framework (a total of five chapters); 4. Preparation of work progress and requirements. The planning time is tight and the task is required to be completed by the Ministry of Industry and Information Technology before August 2010. The association plans to complete the draft in May, requiring relevant clubs, special requirements for superhard materials, abrasives, CNC systems, special processing, forging machinery, tools. Branches such as woodworking machine tools and foundry machinery must submit their small industry plans to the association's industry department at the end of March for inclusion in the planning of the general assembly.
Then the participating companies exchanged experience on the financial crisis adjustment structure. First, Qinchuan Machine Tool Long Xingyuan spoke. He emphasized that last year, the business volume increased, the profit decreased, and the employee income did not increase. How can we change income into assets, convert assets into equity, and increase income other than employee wages and bonuses? Through capital increase and share expansion! Development enterprises should grasp the production process of user products, thoroughly understand the development trend of future processing, and develop products needed in the future in advance. Management innovation, technology platform, and product export should be done well. In order to develop a marketable machine tool, we have built a gear production line. The first and second machine tools are used by ourselves until they are very mature and then sold to users. The quality of the products sold by this method is stable and reliable, and will certainly be welcomed by users. Chairman of the Chongqing Machine Tool Company Liao Shaohua introduced his unique experience of independent development. Any new product design of the company is internal, completely independent of intellectual property rights, and has developed complete sets and series of products. Rediscovered and stabilized the market position of wind turbine new energy processing. He also introduced the experience of remanufacturing, pollution reduction and waste utilization of old machine tools. He said that old machine tools in developed countries accounted for 30-40% of sales revenue. This is a big market and it is proposed to share with colleagues here. Chairman Li Baomin of Shandong Bote Precision Industry Co., Ltd., Chairman of Wanshao Wan of Hubei Sanhuan Forging Equipment Co., Ltd., General Manager He Minjia of Guangzhou CNC Equipment Co., Ltd., and Deputy Chief Engineer of Qiqihar No. 2 Machine Tool Binbin Jiang also exchanged experiences.
The Secretary-General meeting held on January 21 was presided over by Executive Vice President Wu Bolin. Firstly, Executive Vice President Wang Liming made a report on the work summary for 2009 and the work arrangement for 2010. He summarized the work in 2009 in six aspects: 1. Actively respond to the financial crisis and promote the steady development of the industry; 2. Implement major science and technology projects and promote independent innovation in the industry; 3. Track changes in market demand and actively promote product structure adjustment; 4. Deepen the basic management of the industry and accelerate the transformation of development mode; 5. Organize the CCIMT2009 International Exhibition to show the confidence of the industry in responding to the crisis; 6. Improve its own construction and enhance the role of bridges. In the meantime, he focused on the domestic and foreign research conducted by the association to cope with the economic crisis, strengthening statistics and market monitoring; the industrial damage warning work commissioned by the Ministry of Commerce and the establishment of an early warning website, completed the research topic of industrial development policy; Innovate, strengthen the frequency and amount of statistical information release, and increase the number of key contact enterprises to more than 110; statistically predict the economic operation of the industry in a timely manner to provide a basis for government decision-making; statistical information widely distributed to foreign embassies and consulates in China, foreign counterparts, increased the association's International influence, this work received government support and corporate attention; propaganda was more active and made great progress; published industry yearbook, objectively recorded industry development history; successfully hosted military conferences, national leaders attended the conference and the outcome of the conference Appreciate; actively carry out evaluation activities such as advanced clubs, top ten enterprises, and scientific and technological progress awards; actively carry out exhibits review activities to guide the healthy development of the industry and other aspects. He also said that the super-hard materials branch focused on industrial policy activities, and other branches also carried out substantive activities to promote the development of the industry; several chapters carried out exhibits review activities; strengthened international exchanges and received many countries to visit China. Every year, the associations of Chinese embassies and consulates and representatives of internationally renowned enterprises participate in the promotion of international exchanges and cooperation; provide multi-faceted consulting services for users; successfully host CIMT2009 and actively organize CCMT2010 exhibitions; strengthen the association's own construction, Successfully completed the re-election; held two meeting of the Secretary-General, strengthened the management of the club, completed the re-election of eight sub-committees; completed the review and registration of the member units; and deepened the personnel reform of the general assembly. In short, the association has done a lot of work in 2009, achieved remarkable results and made great contributions. Wang Liming Executive Vice Chairman also arranged the work in 2010 in six aspects: 1. Formulate the industry's “Twelfth Five-Year Plan†to promote sustainable development of the industry; 2. Strengthen market demand analysis and promote product structure adjustment; 3. Promote autonomy Innovate and improve the core competitiveness of enterprises; 4. Develop international cooperation and optimize the structure of export products; 5. Run CCMT2010 exhibition to show the development strength of the industry; 6. Adapt to the development of the industry and strengthen its own construction. When talking about specific work, he said that it is necessary to strengthen user research, strengthen government policy recommendations, help the government to modify policy documents, and strive to complete research on three soft projects such as international machine tools; To the super-hard materials, we must do a small industry planning; do the export planning commissioned by the Ministry of Commerce; promote the exchange and interaction with the military industry; enter the clean energy industry, promote structural adjustment, enhance core competitiveness; strengthen the user network, International Internet Construction; Improve the publication of the Yearbook and the selection of advanced clubs; do a good job of the Ministry of Commerce's 5 billion interest subsidies to support the implementation of imported technologies in the industry and statistical analysis of results. and many more.
Deputy Secretary-General Li Jingming informed the CCMT2010 Nanjing Exhibition. He said that the exhibition has been completed, and the exhibition area is 78,000 m2, which is the highest in the past, but still can not meet the demand. There are still a large number of exhibitors waiting for the first time. 10 group clubs and 4 local groups have successfully completed the exhibition. The main tasks in the next step are preparation for exhibition, level of exhibits, supporting activities for exhibitions, professional audience organization, exhibition services, etc. In order to do a good job in the exhibition, the association will hold high-level international and domestic high-level forums and technical exchange activities. It is hoped that the clubs will explain the importance of the activities to key enterprises and register them early so as not to be arranged due to late registration. During the exhibition, the association's website, publications, and newspapers should carry out a large-scale publicity campaign in an all-round way. The aspiring companies should not miss this opportunity. The exhibition should highlight the results of industrial restructuring and upgrading. He also said that in 2011, Beijing International Machine Tool Show CIMT2011 has started to apply for a large number of manufacturers, the scale of the exhibition can reach 118,000 m2, the Nanjing exhibition will be issued a notice. Everyone should pay attention to the website information and do a good job in the preparations for the 2011 exhibition.
Xu Shangwen, deputy director of the Research Office, gave a report on the interim management measures of the club in six parts: 1. General; 2. The branch is the branch and grassroots organization of the General Conference; 3. Actively develop members and strengthen member management; The formation and adjustment of the organization and responsible person of the club; 5. The re-election of the club; 6. Assets and financial management. In the meantime, she said that it is necessary to fully understand the necessity of strengthening the construction of the branch. The State Council issued a document requesting the association to play the role of bridges and services, establish a working mechanism with the charter as the core, straighten out the relationship, and improve the system. According to the requirements of the Ministry of Civil Affairs, the association qualification will be carried out. The AAA-level association can give advice to the government. If the level is not enough, it will lose the qualification to make recommendations to the government. Therefore, the association should vigorously carry out legal construction. The working principle of the General Conference is called the charter. The club does not have the legal person qualification. The working principle is called the regulations and cannot be called the charter. The English name of the club must be the same as the Chinese name. Development members will be changed to the general meeting for review and filing. At present, there are more than 5,900 enterprises in the industry, only more than 1,400 members, which is very asymmetrical; the coverage rate of member units is only about 70%, which is quite reasonable. This year, development members should do a good job as the main task. The club should take the initiative to develop members, develop members in a planned and step-by-step manner, and strengthen member management. The issue of the entry of foreign-funded enterprises has been discussed many times. It is now clearly the responsibility of the clubs. As long as they are willing to fulfill their membership obligations, require membership, and have no bad behavior, they should be accepted as members. Major events of the club should be reported to the headquarters. The headquarters is a legal person, and the problem is the responsibility of the headquarters. Financial management should be standardized, perfect, and strictly enforce the financial system to avoid unnecessary troubles. At present, the work of the club is not balanced, and the headquarters plans to start work to help the backward branch. The reform of the club should be initiated. The current structure was set 20 years ago and does not necessarily meet the needs of the current situation.
Yu Chengting, the honorary chairman of the General Assembly, commended the 2009 Advanced Branch, and the 9 chapters won the honorary title of the Advanced Branch: Superhard Materials Branch, Milling Machine Branch, Special Processing Machine Branch, Tool Branch, Heavy Machine Tool Branch, Drilling and Boring Machine Branch, Grinding Machine Branch, CNC system branch, machine tool attachment branch. The club’s Secretary-General discussed the summary, plan and conference documents. Finally, Wu Bing executive vice president made a summary of the meeting. In his summary, he said that in 2009, the industry's output value reached 380 billion yuan, the overall growth rate can reach 12%, but the growth of gold cutting machine tools is not large, forging and abrasives have grown significantly. 2009 is the most prominent year for product structure adjustment in the past decade. The number of products has declined, but the output value has risen. Some enterprises have done a good job in capital operation and lost their product operations. However, capital operations have been profitable, and the total operation has been profitable. The focus of this year's work is to do a good job of "one improvement and two adjustments": to enhance the ability of independent innovation, and to adjust the industry and product structure. In short, the association assisted the government in formulating and modifying some policies, doing some practical things for the company, and providing some domestic and foreign industry information services. The automotive industry currently accounts for about 50% of machine tool consumption. This year, we will organize research on the automotive industry and the emerging clean energy industry. The work of the exhibition is also one of the important tasks. The quality of the supporting activities is also high. However, some people worry that the popularity of Nanjing is strong. It depends on everyone's efforts. I believe that there will be no big problems. This year's work of the Standards Association is one of the key points. We will pay close attention to document revision and discussion before and after the Spring Festival. Actively develop members and act according to the rules. Financial work should be improved.
Flange housing also known as Flange Bearing Housing.
Flange housing/ Flange bearing housing is a commonly used blocks in manufacturing, mining, and construction industries for mounting self-aligning ball or spherical roller bearings with adapter sleeves or cylindrical bores. They are designed for use on conveyors, dryers, road building equipment, run-out tables, fans, crushers, hammer mills, and many other high-precision, heavy duty applications.
SHAOXING QIFENG AUTO PARTS CO., LTD (QFAP) have specialized in producing US/EURO standard bearing housings more than 10 years, could help to design the bearing housing or produce the bearing housing according to your requirements. (OEM accepted)
Materials: Ductile iron, Grey iron, Steel Castings
Surface treatment: painting, powder coating, zinc plating, only oiled
Main of our customers is from USA, CANADA, AUSTRALIA and German
Flange Blocks,Flange Block Bearing,Wooden Flange Blocks,Designed Flange Blocks
SHAOXING QIFENG AUTO PARTS CO., LTD. , https://www.sxqfap.com