Aluminum buckle plate top more commonly used
The ceiling consists of decorative panels, keel, hanging wire and other materials, which can be changed frequently and often according to needs. It is a very convenient household single product. According to the different materials of the decorative board, the ceiling can be divided into gypsum board ceiling, metal board ceiling, glass ceiling, PVC board ceiling, etc. The cost of gypsum board is relatively cheap, followed by PVC board, the metal board is more durable but the price is higher. At present, the main use of home improvement is the aluminum buckle ceiling in the metal plate.
However, pure aluminum is soft, so the aluminum buckle on the market is actually an aluminum alloy ceiling, aluminum-magnesium alloy, aluminum-manganese alloy and so on. The hardness of the aluminum-manganese alloy buckle plate is higher, while the aluminum magnesium alloy increases the hardness while also increasing some brightness. Good texture, strong decorative effect. The high-quality aluminum-manganese alloy pinch plate is commonly known as stainless steel because of its good corrosion resistance.
Special note: There are some inferior substrates on the market, using waste aluminum, recycled aluminum or earth aluminum and other materials, the products are easily deformed, easy to oxidize, and some are even waste aluminum containing chromium, lead, mercury and other harmful substances. The kind of aluminum buckle base material is low in price, high in hardness, and has a certain thickness, which is very deceptive.
The width of the aluminum pinch on the market is generally between 10-15 cm, and the thickness is 0.55 mm, 0.6 mm, 0.7 mm, and 0.8 mm. The price is between 130 yuan/m2 and 200 yuan/m2.
In the small market, you can often hear the salesman say: "The buckle is of course thicker, the better, you see how thick our gusset is..." In fact, the thicker the aluminum gusset plate is, the better. Manager Cui Jian explained that the thickness is a guarantee of the hardness of the gusset plate. If the hardness is not enough, the gusset plate will be deformed; but the gusset plate with a thickness of 0.6 mm or 0.7 mm in the home decoration is fully enough for use. Thickness is no use.
Surface treatment is divided into four types
There are many kinds of surface treatment methods for aluminum buckles on the market, such as roll coating, film coating, baking paint, and drawing.
According to reports, roller coated aluminum buckle bright colors, but only plain, but more stick fumes, relatively difficult to take care of; cover film is covered with a layer of film on the buckle board, the color is reflected directly on the film, the color is lighter . This film has two kinds of imported and domestic, its thickness also affects the life of the aluminum buckle. Drawing is a pattern processing method, relatively beautiful.
Special Note: If the cut surface is clean, the quality of the film is good; if it is jagged, the quality of the film is relatively poor.
Empire Engineered Flooring,Empire Engineered Hardwood,Engineered Oak Floorboards,Oak Engineered Hardwood Flooring
Huzhou Dinuoju Wood Industry CO.,LTD. , https://www.dnjflooring.com