How to install smart parking barriers to meet the specifications?

The parking lot gate looks simple, but the installation still needs some details to pay attention to. These details can make the life of the barrier longer, and the staff is more convenient to operate. The following are some points to note.

Installation of Control and Barriers It is necessary to pay attention to the fact that the equipment must be firmly installed, and there should be no shaking. If the equipment can withstand 100 kg/s of impact, the equipment will not be displaced and not loosened. The connection between the control machine, the bottom of the gate, and the ground shall be strict. Do not leave any gap. If there is any gap, cement shall be used to wipe out the seal. The position of the box should not exceed the lane line, at least 5 cm from the edge of the lane. The import control machine should be installed on the left side of the vehicle's biased direction to facilitate the driver's credit card.

Barrier display barrier gate display installation to be perpendicular to the ground, tilt angle control in 1 °, installed in the driver can easily see the place, easy for them to reversing.

Barrier control button The principle of this button installation is to facilitate the operation of the staff, generally installed in the local.

Surveillance camera installation The main concern here is the installation of the camera bracket, the bracket should be perpendicular to the ground, the slope should not be greater than 1 °, the base should be solid and stable contact with the ground, do not exceed the lane line, there is no shaking, to ensure surveillance cameras Stable shooting capture.

Aluminum Stair Handrails

Aluminum Stair Handrails,Black Aluminum Handrail For Stairs,Decorative Aluminum Handrail,Exterior Aluminum Handrail Systems

Lemon Building Material Co., Ltd. , https://www.lemonbuilding.com

This entry was posted in on