How old doors are refurbished ? In general, there are solid wood doors that will choose to refurbish, because the wooden doors can be refurbished and then used after the surface is slightly damaged. So don’t think about the door being old or damaged, just think of it. Replaced, this is a very wasteful performance, the following Xiaobian will give you a description of the two old ways of renovation.
How to renovate the old door method: sticker method
The refurbishment sticker is a layer of paper on the old door to protect and refurbish. The sticker is very environmentally friendly and convenient. The retreading process is also very quick. The material and type of the sticker are many and selective.
The old door was refurbished by first removing the door and putting it on the floor for better operation. Remember to lay it flat and then prepare a sticker that is first spread on the door. The surroundings should be neat, especially the four corners should be flush with each other. To calculate the length of the wrapping, you can put a heavy object in the middle of the sticker after laying it. Fix it first to avoid the movement of the sticker in the operation. Just like the paper is a principle.
When starting to paste, start with a corner and remove the anti-adhesive layer on the back of the sticker. The sticker should be tightened and then glued to the corner of the door. Then it can be pressed tightly. To work with two people, tear the release layer in one direction so that one side of the door is glued.
This side is fixed, you can remove the weight of the middle, and then began to press and flatten, mainly to the center line, right to the left and right push, to tear off all the anti-stick layer is completed.
How to renovate the old door II: paint brushing
First of all to remove all the accessories on the door, especially the door handles and the like, which helps to paint uniform, and then use sandpaper to polish the old door damaged place, first repair it, in particular, the door panel surface is uneven The place needs to be smoothed with sandpaper after being polished. If the surface has cracks or pits, it must be filled with a layer of putty before polishing and repair.
In this way, the surface of the old wooden door is all sanded again, and then the powder is cleaned with a damp cloth. After the paint is dry, the paint can be started. When the paint is applied, the paintbrush is used to dip the brush in the paint bucket. According to the rule from top to bottom and from left to right, the corners and hidden areas are painted.
After brushing the paint, you must wait for it to dry. Let it sit for at least four to five hours. After the paint is dry, polish it again. Take the fine sandpaper and polish it again from end to end. Then you can paint it again. Repeat the above steps. Finally, you will need to apply the top coat again. Put on the handle and so on.
Editor's Note: The above is about the two methods of renovation of the old door , compared to re-purchasing a door, it is more economical to refurbish the old door, so if you need to refurbish the door, you may wish to refer to the reference Compilation of the editors should help.
Wood Pellet Stove,Pellet Stove Freestanding Stoves,Pellet Stoves With Battery,Pellet Stove Rebates
Jinan Huancheng Heating Equipment Manufacturing Co., Ltd. , https://www.globalstove.com