Maintenance work to do solid wood furniture in order to stay young


China board trading network news:

Urban people are eager to return to nature in their home life and enjoy a simple rural living environment. 100% of natural wood furniture comes from the natural needs of this area.

Since the service life of solid wood furniture can last for several decades, maintenance is a very important task.

Balance humidity and temperature

Wood is porous and breathes.

When the air is dry, the pores on the surface will shrink due to the volatilization of water, and cracking will occur for a long time. However, when the humidity rises, the wood expands because it absorbs enough moisture. Therefore, proper adjustment of the temperature and humidity in the home is an important part of maintaining solid wood furniture.

The temperature of 18 degrees Celsius to 24 degrees Celsius and the relative humidity of 35% to 40% are the ideal environment for the placement of solid wood furniture. In order to maintain a proper humidity, a humidifier can be suitably used.

In addition, avoid placing the furniture close to the heat source or the air conditioner vents, because severe temperature changes can cause furniture damage and premature aging.

Avoid exposure to sunlight

Some wood colors will naturally darken over time, appear more heavy and quaint. Some people will mistakenly believe that long-term exposure to sunlight can produce such an effect. In fact, this is a very wrong idea. The sun shines on the furniture surface for a long time. Ultraviolet rays and high temperatures can cause the internal moisture of the wood to lose its balance, causing the surface of the coating to crack or cause fading and blackening. The correct placement of solid wood furniture is to avoid being placed in places exposed to the sun, and to use transparent sheer curtains to shield the sun from direct sunlight. This will not affect the indoor lighting and protect the interior furniture.

It is very important to dust and wax

There are paint on the surface of solid wood furniture, so it is very important for the maintenance and maintenance of the paint film.

Once the paint film is damaged, it will not only affect the appearance, but also affect the internal structure of the product. Therefore, if there is any stain on the surface of the furniture, it must not be wiped cleanly. Avoid using alcohol, gasoline, or chemical solvents to remove stains. Every day, every three months to six months, wipe the surface of the furniture with a damp cotton cloth and a mild soapy water to remove the stains and the old wax. After wiping, wait until the moisture is removed. Volatilize, then re-apply special pure wood furniture polish wax, and then gently grind it to form a new protective film.

Do not use plastic and rubber

Avoid laying plastic tablecloths and mats on the surface of solid wood furniture for a long time, because the chemical components in the plastic can damage the coating. Some people write on a solid wood table and like to put a plastic pad on the table to prevent the pen tip from damaging the furniture. It is advisable to use a decorative table cloth made of natural fabric or a small felt pad between the plastic pad and the table because of plastic and rubber. Chemicals in or nylon products can penetrate and soften the coating, creating depressions and discolorations. The appearance of scratches on the furniture not only affects the appearance but also affects the service life, so care should be taken not to use hard objects and metal objects and furniture in direct contact to protect the surface from scratch marks.

The above information, relevant Baoyuan plate supply information, plate purchase, etc. Please pay attention to the Chinese plate trading network


Bluetooth Speaker

  • Bluetooth wireless
  • Built-in speaker
  • Built-in microphone
  • Handsfree speakerphone
  • Supports profile A2DP (Advanced Audio Distribution Profile)
  • Aux in (3.5mm audio input)
  • Micro-USB port for battery recharge
  • Wireless range: 10 meter
  • Controls: volume up, volume down, play/pause, pairing/answer phone
  • On/off switch
  • LED pairing indicator
  • DC battery power: built-in rechargeable battery
  • Battery life: ~5 hours at 100% volume
  • Dimensions:Diameter 115mm*Height 145mm
  • Includes: Micro-USB cable, Aux plug,

Bluetooth Speaker,Portable Bluetooth Speaker,Mini Bluetooth Speaker,bluetooth Wireless Speaker,portable wireless speaker

Shenzhen Lanejoy Technology Co.,LTD , https://www.szsmallcompressionspring.com

This entry was posted in on