>>> Jet siphon-type one-piece toilet Reviews Selection of hand-held toilets
Numerous brands of toilet evaluation reports (full version) have recently collated a lot of information on sanitary ware and they are summarized here.
The selection of this survey is entirely personal and it only serves as a reference for everyone.
The survey consists of five parts, the appearance of the model, sealed inside the pipe glaze, sealed glazed inside the tank, tank parts quality, toilet seats and seats, cost-effective.
1. Appearance model is mainly to see whether the toilet is a Siamese type, whether the lower part is all-inclusive, the back of the water tank is also the same as the front is sealed and smooth, this is not only easy to clean, but also clean and elegant, very good grades. Observe the time to pay attention to the toilet cover and the toilet seat all lift up and look again, usually the home is in this state of use, and whether the toilet lid can be set up to live is also very important, and some always down.
2. The internal glazing of the pipeline is mainly a detailed inspection and is also the most important part related to life. Whether the interior glaze is related to the actual conditions used in the future, whether the interior of the mold is smooth, smooth, and whether the glazing layer number is the same as the surface glaze Whether or not the hand feels the same, and when it is decided to purchase, the toilet of the selected model should be put down and the inside of the drained pipe should be observed with the eyes, and the hand should be put in to check the glazing condition carefully.
3. The glazing inside the tank is conducive to protecting the water tank and prolonging the service life. The water quality in Beijing is rough. The long-term immersion causes serious damage to the interior of the tank. If everyone purchases a conjoined toilet seat, one can only replace the water tank if it is damaged and can only replace it completely. . This is also the performance of professional manufacturers, also see whether the application of the glaze and the surface is the same, do not only touch the upper part, to focus on the bottom of the tank, some profiteers only glazed the upper part, as introduced to the customer, increase the goodwill . When opening the water tank cover, carefully observe the edge of the water tank. Some water tanks actually have small bubbles remaining in the ceramic. Such a product must not be purchased. There are serious quality problems. Sales are usually during the firing process. Caused, cannot be avoided. This kind of explanation is purely nonsense. Many observers will notice that the general brand-name products are undergoing special edging on the edge of the tank, and some of them are also specially painted with white paint for protection.
4. Water tank accessories must first ask whether it is imported brands, or manufacturers own production, or other manufacturers to do the work, whether it contains water accessories, mainly to see the resilience, good products strong rebound, and 3 liters and 6 liters have a great deal of production on the hand, and the poor products, because of their rough work, sometimes get stuck due to uneven force angles, they can't reply, and there are some auxiliary functions, such as adjusting the amount of water. The degree of professionalism of the manufacturer. Water tank accessories are generally warranted for 5 years.
5. Toilet seats and seats are mainly used to see if they are thick and heavy. Some manufacturers claim to use resin as the material of toilet seats, and carefully observe whether they are as white as the toilets and whether cracks are present on the surface. And whether it has a damping function, whether the part of the toilet seat and the toilet is connected with metal material, and some manufacturers are made of plastic material. This is not as durable as the metal product, the seat ring is as elliptic as possible, but the square is not good but it is bad. It is best to incline toward the inside, and some of the seats are semi-circular in cross-section. This type of seat will cause PP cramps when used for a long time. The ramp-type seat is not slightly ergonomic and comfortable to use. According to the size of the family, it is recommended that children have a smaller selection of products. Ha ha!
6. The main cost is to see which one is low in price, more affordable, and has great activity. Generally during the off-season from February to March, it is easier to find low prices. Therefore, the current price/performance ratio is more reliable and reliable than the peak season.
The evaluation brand is as follows:
1. The American standard is simple, elegant, and poor in internal glazing. There is no glazing inside the tank and the price is high.
2. Kohler's general shape, glazed surface is not white, there is no glazing inside the tank, and the conjoined type is expensive.
3. The music house has a general shape, high price, and the price/performance ratio is still not high.
4. TOTO is generally styling, the price is high, there is no glazing inside the pipeline, and there is a complaint record after the sale.
5. There are only a few styles and styles in Jixiang. There are almost no all-inclusive products and the prices are relatively high.
6. The gold medal is general in shape, the internal craft is meticulous, the style is not much, the fittings are general, the price is low, the cost performance is high.
7. Many Asian pottery styles, excellent individual style, internal workmanship, lower prices, higher cost performance.
8. The Huida model is outdated, there is no glazing inside the pipeline, there is no internal water tank, and the domestic brands are rather disappointing.
9. Fanoja has a trendy style with many styles. The high-end products are glazed and the mid-range products must be checked for specific models. High cost performance.
10. Carlisle is generous in shape, with straight flush drainage, good internal glaze, high price, and low cost performance.
11. The magpie style is poor, internal workmanship is common, and the price/performance ratio is low.
12. Faenza has excellent styling, many styles, outstanding interior workmanship, imported accessories, and high prices. It is a high-end brand in China. After sales installation, there was a record of complaints.
13. Carfen shape is general, style is not much, mostly swirl siphon flush, internal workmanship is good, water tank accessories are the most outstanding. The price is higher. Special price is suitable.
14. Henkel styling styles, general workmanship, general tank accessories, high cost performance.
15. Still high in style, style, workmanship, and high prices.
16. Buffy is poor in shape and works well. Poor cost performance.
17. The Wrigley model is simple and generous, with many styles and excellent internal workmanship. Parts of the water tank fittings are imported products and the price is high.
18. I v I is avant-garde, with meticulous internal processes, the highest price, and a lower price/performance ratio.
19. The shape of the whale is the most outstanding. The internal workmanship is meticulous, the water tank fittings are common, the price is high, and the package is more affordable.
20. Thai Tao modeling, more styles, excellent workmanship, lower prices, excellent price.
21. The products of America and Canada are rich, with various shapes and internal processes. High cost performance.
22. Eagles are generally styling, with internal workmanship, medium price, and no distinctive brand.
23. Ottoman style is general, style is less, internal workmanship is poor, prices have no advantage, lack of competitiveness in the same product.
24. Four-dimensional modeling is general, but the style is not many, but the internal workmanship is meticulous, China famous brand, and the cost performance is higher.
25. Dongpeng style is general, the internal workmanship is meticulous, and the water tank accessories are poor.
26. There are many Aubel products, details of workmanship, poor water tank accessories, and high cost performance.
27. Anwar style is not much, the details are not good, the interior of the tank is not glazed, the price is high, and the price is low.
28. Ginnis didn't specifically inspect it, but it seemed to me that the toilet had a general shape and there was no all-inclusive product.
29. The small white poplar was not displayed in the high-grade building materials city and was not specifically examined.
All the above brands are tested on the spot to ensure that the data is true and reliable. I hope to be able to help you choose the toilet.
Toilet music paint
Flap Wheels
Flap wheel, in general will devide in to 2 types: flap wheel with shaft and Chuck Flap Wheel .
Aluminium Oxide Chuck Flap Wheels are an ideal choice for a wide variety of blending, deburring and finishing applications common in the metal fabrication, welding and polishing industries.flap wheels are conformable to intricate shapes and contours. designed to deliver a consistent finish with a uniform rate of cut, flap wheels wear away, continually exposing fresh abrasives.
Flap Wheel With Shaft
Mounted Flap Wheel are a general-purpose tool effectively used in a vide variety of applications ranging from weld removal and deburring to final finishing. They are specially to provide the versatility required in a modern metal-working factory. Providing an optimal finish on both stainless steel and non-ferrous metals.
We distributes and wholesales various brands of Bonded Abrasives, Abrasive Sanding Disc, Cutting Wheels , Flap Disc Backing Pad, Flap Disc Adhesive, and Surface Conditioning Product etc, and enjoy a high position among consumers.
Flap Wheels,Abrasive Flap Wheel,Polishing Flap Wheels,Abrasive Polishing Flap Wheels,Abrasive flap wheel,150mm abrasive flap wheel
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com