Pneumatic double diaphragm pump is a full-featured pump equipment, which has all the features of submersible pumps, self-priming pumps, impurity pumps, shielded pumps, mud pumps and many of the features of conveyor machinery. But unfortunately, the pneumatic dual diaphragm pump in the use of the process, there are failures occur, then the pneumatic double diaphragm pump failure and solutions may be what? Pneumatic double diaphragm pump failure First, the pump is running but the flow is too low 1, check whether the pump cavity plaque, adjust the compressed air inlet pressure. Reduce the pump speed to adjust the viscosity and concentration of liquid. 2, check the valve ball is stuck. If the delivery of liquid and valve ball material does not match. The ball will be swollen Please replace the ball and seat of the suitable material. 3, please check whether the inlet pipe is blocked. Second, the pneumatic dual diaphragm pump can not start or move slowly 1, check the filter, pressure and lubrication devices and air inlet filter is blocked. 2, check whether the air valve stuck by impurities, please remove the valve and clean it, check whether the valve piston scratches. 3, check the spindle and the "O" ring for scratches, wear and crushed traces, if damaged please replace. Third, liquid leakage from the gas chamber discharge port 1, please check the diaphragm is broken. 2, check the diaphragm is installed and locked properly. Pump is running but the flow is too low, pneumatic dual diaphragm pump can not start or slow movements, liquid leakage from the gas chamber were 3 types of faults is the use of pneumatic dual diaphragm pump more commonly encountered phenomenon. Pneumatic double diaphragm pump failure may greatly affect the use of pneumatic dual diaphragm pumps, but also may delay the production work, how to avoid or even eliminate these failures, the need for the wisdom of workers and further work of experts and scholars.
An electric Butterfly Valve is a type of valve that uses an electric motor to control the opening and closing of the valve. The valve consists of a disc that rotates around a central axis to control the flow of fluid or gas. When the electric motor is activated, it rotates the disc to open or close the valve. Electric butterfly valves are commonly used in industrial applications such as water treatment, chemical processing, and HVAC systems. They are preferred over manual valves because they offer precise control and can be operated remotely.
Electric Butterfly Valve,Electric Actuated Butterfly Valve,Electric Butterfly Valve Price,Electric Butterfly Valve
WUXI KVC-VALVE , https://www.wxkaiweixi.com