SAFE HI-TEC SA6550 With a 650 mm wide by 500 mm high tunnel opening, provides outstanding threat detection and a low total cost of ownership. It's innovative design allows for bi-directional operation, while ergonomic options such as its adjustable control panel stand make it easy to operate.
General Specifications:
Â
| Tunnel Size | 650(W)*500(H)mm |
| Conveyor Speed | 0.22m/s |
| Conveyor Max Load | 170kg |
| Dose per Inspection | <2.9μ Gy/h |
| Resolution | <0.101mm Metal Wire |
| Spatial resolution | Â Level: Dia1.0mm, Vertical: Dia1.3mm |
| Penetrate resolution | Dia 0.511mm |
| Penetration | 30-32mm steel |
| Film Safety | Guarantee ISO1600 Film |
| X-ray Leakage | <0.5 μ Gy/h (at a distance of 5cm From external housing) |
| Image System : | |
| Technical Principle | Dual-energy X-ray Imaging; L Shaped Array |
| X-ray Sensor | L-Shaped Photodiode Array (multi-energetic) |
| Monitor | High Resolution Color, LCD Accord, 17inch |
| Image Display | High resolution of 1024 * 1280 pixel; Image Grey Level: 65536 |
| Image Enhancement | 1-64times enlargement continuity, Color/BW, negative, high/low penetration, organic /inorganic Stripping, general enhancement, and pseudo color, etc. |
| Image Recall: | All preceding images recallable, retrieval. |
| Explosives & Narcotics Detection | Explosives & narcotics alarm and highlight according to atomic number signature |
| High Density Region Alarm | Impenetrable region alarm and highlight, for possible concealing of threats and contrabands |
| Image Archive | Up to 100,000 images stored automatically, enable transferring to USB disk, and converting to JPG, BMP and other general formats |
| Miscellaneous Functions | Time/date display, counters, user management, system-on/X-ray-on timers, power on self test, built-in diagnostic facilities, dual-direction scanning, system log, system standby and stimulant training,etc |
| Network Applications | Multiple remote applications available based on Ethernet LAN and windows platform, such as image centralized storage and identify, recheck workstation, and network TIP, etc ( Optional) . |
| Images process | 24bit real time processing ,4colors analysis, Images displayed marked date and ID NO ,Count the number of bags ,Memory gray level:65536 |
| Operating Environment: | |
| Operation temperature/Humidity | 0ºC-40ºC/10%-95%(non-condensing) |
| Storage Temperature/Humidity | -20ºCto 60ºC/ 5%-95%(non-condensing) |
| Operation Power | 220VAC(±10%)50±3Hz (Optional: 100VAC,110VAC,120VAC,200VAC) |
| Power Consumption | 1.0KW (max), 0.3KW(working) |
| Noise | <58db |
| Scanner Dimensions (L×W×H) | 2200mm x918mm x1442mm |
| Gross Weight | 700kgs |
| Packing Volume | 5.5 CBM |
| X-ray Generator: | |
| Anode Voltage | 140kv |
| Anode Power | 0.35 MA |
| Generate angle | 80 degree upward |
| Brand | Chinese Brand |
| Generate direct | Â from bottom to top |
| Cooling / Duty Cycle | Oil Cooling /100 |
SAFE HI-TEC is the professional manufacturer in China. We are specialised in producing the X-ray baggage Inspection Scanner, Walk Through Metal Detector, Explosive Trace Detector Hand Held Metal Detector etc. We design and manufacture. According to the customer's requirements, we put the customer in the first position. If you need the products, pls feel free to contact us.Â
 SAFE HI-TEC Hotel Baggage and Parcel Inspection Explosive Scanning Machine SA6550
SAFE HI-TEC SA6550 With a 650 mm wide by 500 mm high tunnel opening, provides outstanding threat detection and a low total cost of ownership. It's innovative design allows for bi-directional operation, while ergonomic options such as its adjustable control panel stand make it easy to operate.
General Specifications:
Â
| Tunnel Size | 650(W)*500(H)mm |
| Conveyor Speed | 0.22m/s |
| Conveyor Max Load | 170kg |
| Dose per Inspection | <2.9μ Gy/h |
| Resolution | <0.101mm Metal Wire |
| Spatial resolution | Â Level: Dia1.0mm, Vertical: Dia1.3mm |
| Penetrate resolution | Dia 0.511mm |
| Penetration | 30-32mm steel |
| Film Safety | Guarantee ISO1600 Film |
| X-ray Leakage | <0.5 μ Gy/h (at a distance of 5cm From external housing) |
| Image System : | |
| Technical Principle | Dual-energy X-ray Imaging; L Shaped Array |
| X-ray Sensor | L-Shaped Photodiode Array (multi-energetic) |
| Monitor | High Resolution Color, LCD Accord, 17inch |
| Image Display | High resolution of 1024 * 1280 pixel; Image Grey Level: 65536 |
| Image Enhancement | 1-64times enlargement continuity, Color/BW, negative, high/low penetration, organic /inorganic Stripping, general enhancement, and pseudo color, etc. |
| Image Recall: | All preceding images recallable, retrieval. |
| Explosives & Narcotics Detection | Explosives & narcotics alarm and highlight according to atomic number signature |
| High Density Region Alarm | Impenetrable region alarm and highlight, for possible concealing of threats and contrabands |
| Image Archive | Up to 100,000 images stored automatically, enable transferring to USB disk, and converting to JPG, BMP and other general formats |
| Miscellaneous Functions | Time/date display, counters, user management, system-on/X-ray-on timers, power on self test, built-in diagnostic facilities, dual-direction scanning, system log, system standby and stimulant training,etc |
| Network Applications | Multiple remote applications available based on Ethernet LAN and windows platform, such as image centralized storage and identify, recheck workstation, and network TIP, etc ( Optional) . |
| Images process | 24bit real time processing ,4colors analysis, Images displayed marked date and ID NO ,Count the number of bags ,Memory gray level:65536 |
| Operating Environment: | |
| Operation temperature/Humidity | 0ºC-40ºC/10%-95%(non-condensing) |
| Storage Temperature/Humidity | -20ºCto 60ºC/ 5%-95%(non-condensing) |
| Operation Power | 220VAC(±10%)50±3Hz (Optional: 100VAC,110VAC,120VAC,200VAC) |
| Power Consumption | 1.0KW (max), 0.3KW(working) |
| Noise | <58db |
| Scanner Dimensions (L×W×H) | 2200mm x918mm x1442mm |
| Gross Weight | 700kgs |
| Packing Volume | 5.5 CBM |
| X-ray Generator: | |
| Anode Voltage | 140kv |
| Anode Power | 0.35 MA |
| Generate angle | 80 degree upward |
| Brand | Chinese Brand |
| Generate direct | Â from bottom to top |
| Cooling / Duty Cycle | Oil Cooling /100 |
SAFE HI-TEC is the professional manufacturer in China. We are specialised in producing the X-ray baggage Inspection Scanner, Walk Through Metal Detector, Explosive Trace Detector Hand Held Metal Detector etc. We design and manufacture. According to the customer's requirements, we put the customer in the first position. If you need the products, pls feel free to contact us.Â
Â
If you're a novice stained glass hobbyist, a glass grinder can help you create beautiful, professional looking projects from the very start. Glass grinders allow you to alter the shape of your glass more easily than glass saws do, and you`ll waste less of that expensive glass due to inaccurate cuts. Because you can grind precisely, the pieces of your project will fit together better, and because glass grinders leave a rougher surface, copper foil will adhere better to the edges. Finally, stained glass grinders with specialty bits simplify tasks like drilling holes, mitering glass edges and removing texture from the glass surface. These tips and tricks can help you get more use out of your stained glass grinder, and ensure that you`re using it safely. Positioning Hints for Easier Working Place your glass grinder where you`ll get good overhead light to make it easier to work. Keep in mind, though, that your shadow will fall over your work. Add a second light to shine from the front for the best illumination while you work. Make sure that the grinder is at a comfortable height for you to work with. If you`ll be standing, you should be able to bend your arms at the elbow and place your hands where you`ll be holding the glass. Positioning the grinding surface higher or lower will put extra strain on your shoulders and lower back. Put a stool on the floor beside you. Working with one foot elevated can reduce back strain when you work for long periods of time. Put a splash guard around your stained glass grinder to keep from splattering other surfaces with overspray while you work. Working Tips for Glass Grinders Mark pattern lines on the glass with a paint pen. It will help you follow the pattern more easily and the paint is more likely to stay on than other types of markers. Have a towel handy for drying your pieces before you place them on the pattern to measure them. Keep your glass piece flat on the grinder`s work surface to prevent angling the edges. If the glass cuts your fingers while you`re grinding, you may need to reposition or replace the bit. Ease up and check the bit for wear to make sure the bit isn`t too worn to do its job properly. Keep your water reservoir filled to the right level. If you see a white buildup around the grinding head, it means that there`s not enough water getting to the bit. Check to be sure that the sponge has contact with the bit and that there is enough water or coolant in the reservoir. Stained glass grinders are a valuable addition to your stained glass supplies and tools. If you use it carefully and treat it properly, you`ll find that it`s invaluable in helping you create professional, beautifully finished pieces of glass art. Current glass grinder bit includes: Glastar Bits,Inland Grinding Bits,Mika Grinding Bits,twofers grinding bit,wizard grinding bit,Diamond Tech grinding bit
Diamond Grinder Head, Diamond Grinder Bit, Diamond Grinder Bits, Standard Replacement Grinder Bits, Standard Glass Grinder Bit, Glass Grinder Bits ,Dermal Diamond Grinder Bit, Glass Grinder Bit For Dermel, Glastars Grinder Bits
Hans Super Abrasive Diamond Tool Co.,Ltd , https://www.hansuperabrasive.com