Japan's Sandvik (SANDVIK, headquarters: Nagoya City) will launch the powerful tool "Coromill 360" on May 25, 2009. The tool has high stability and reliability for heavy cutting face milling of all cutting materials. Sex and excellent chip discharge. In order to improve the cutting efficiency, the tool is made of hardened steel and the Cassette has a sawtooth structure. Simply turn the Wedge Screw on the tool holder to secure the chip and shorten the Chip Corner exchange time. Can be widely used in steel, energy, shipbuilding and large stamping dies and other fields.
With a 4-corner configuration and an 11° Positive Chip, heavy-duty machining is possible smoothly. The maximum depth of cut can be supported by 13mm and 18mm by replacing the tool holder. In addition, it has the following characteristics: (1) Based on the 60° lead angle, the proximity and axial and radial cutting resistances are evenly distributed; (2) The surface finish processed on a wide parallel surface is good.
The main specifications are as follows. The tool diameter is 160 to 500 mm. The tool holder size is available with a 19mm cutting edge (maximum depth of cut of 13mm) and a 28mm (maximum depth of cut of 18mm) cutting edge. For the blade size, the 19 mm cutting edge is used to have a thickness of 6.35 × parallel surface of 2.2 mm, and the 28 mm cutting edge is used to have a thickness of 7.94 × parallel surface of 4.6 mm.
With a 4-corner configuration and an 11° Positive Chip, heavy-duty machining is possible smoothly. The maximum depth of cut can be supported by 13mm and 18mm by replacing the tool holder. In addition, it has the following characteristics: (1) Based on the 60° lead angle, the proximity and axial and radial cutting resistances are evenly distributed; (2) The surface finish processed on a wide parallel surface is good.
The main specifications are as follows. The tool diameter is 160 to 500 mm. The tool holder size is available with a 19mm cutting edge (maximum depth of cut of 13mm) and a 28mm (maximum depth of cut of 18mm) cutting edge. For the blade size, the 19 mm cutting edge is used to have a thickness of 6.35 × parallel surface of 2.2 mm, and the 28 mm cutting edge is used to have a thickness of 7.94 × parallel surface of 4.6 mm.
Furniture Handles,Modern Door Handle,Furniture Drawer Handles,Black Modern Pull Handles
ChongQing Troya Hardware Manufacture Co., Ltd , https://www.troyahardware.com